Tag: Training Oil and Gas Jakarta

Training Practical Pumping Metdods For Petroleum Production System

Petroleum·

LATAR BELAKANG :

Setelah menyelesaikan Training Practical Pumping Metdods For Petroleum Production System  ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan reservoir minyak bumi yang berhubungan dengan penggunaan sucker-rod, electric submersible, hydraulic dan jet pump.
  • Melakukan diagnosis sederhana dan memengerti pengelolaan data sumuran minyak yang diproduksi dengan sucker rod pumping, electric submersible, hydraulic dan jet pump.
  • Membuat analisis sederhana terhadap data sumuran minyak, melakukan perhitungan-perhitungan kinerja sumuran sebagai hasil dari pemompaan dengan berbagai metoda sesuai dengan keadaan reservoirnya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dan melakukan optimisasi produksi untuk sumuran minyak yang diproduksi dengan sucker rod pumping, electric submersible, hydraulic dan jet pump sesuai dengan batasan operasinya.

PRE-REQUISITE :

Latar belakang  : Operator/Sr. Operator/ Jr.Engineer

MATERI TRAINING  :

SISTEM PRODUKSI LAPANGAN MINYAK BUMI

  • Sistem Produksi Alamiah
  • Sistem Produksi Dengan Pengangkatan Buatan

AZAS POMPA

  • Sistem Produksi Alamiah
  • Sistem Produksi Dengan Pengangkatan Buatan
  • Kerja Pompa Sentrifugal
  • Hukum Kesebangunan
  • Kecepatan Spesifik (Nomor Jenis) dan Klasifikasi
  • Performansi
  • Kavitasi
  • Momen awal

SPESIFIKASI POMPA

  • Kapasitas Aliran
  • Sifat-sifat Zat Cair
  • Head
  • Head Isap Positip Neto atau NPSH
  • Penentuan Putaran dan Jenis Pompa
  • Daya Poros dan Efiensi Pompa
  • Koreksi Performansi untuk Zat Cair Kental
  • Pemilihan Bahan
  • Pemilihan Penggerak Mula

KONSTRUKSI POMPA

  • Klasifikasi Menurut Jenis Impeler
  • Klasifikasi Menurut Bentuk Rumah
  • KIasifikasi Menurut Jumlah Tingkat
  • Klasifikasi Menurut Letak Poros
  • KIasifikasi Menurut Belahan Rumah
  • KIasifikasi Menurut Sisi Masuk Impeler
  • Pompa jenis Tumpuan Sumbu
  • Pompa Jenis Khusus
  • Alat Pengimbang Gaya AksiaI

OPERASI POMPA

  • Kurva Head Kapasitas Pompa dan Sistem
  • Operasi Paralel dan Operasi Seri
  • Pengaturan Kapasitas
  • Prosedur Menjalankan dan Menghentikan
  • Benturan Air (Water Hammer)
  • Surjing
  • Fluktuasi Tekanan
  • Operasi Otomatik

SUCKER ROD PUMP

  • Pendahuluan
  • Pump Intake Curve
  • Optimisasi Produksi
  • Rancangan Sucker Rod Pump API RP11L
  • Komponen Alat Utama
  • Faktor-faktor yang mempengaruhi gerakan rod
  • Perencanaan pompa
  • Dynagraph & Dynamometer

ELECTRIC SUBMERSIBLE PUMP

  • Pendahuluan
  • Dasar-dasar perhitungan ESP
  • Konstruksi ESP
  • Karakteristik pompa SRP
  • Cara Memilih jenis pompa
  • Aplikasi di Lapangan

POMPA HIDRAULIK

  • Alat-alat permukaan
  • Jenis-jenis unit pompa
  • Jenis-jenis unit pompa
  • Ukuran pompa
  • Langkah-langkah pada pemilihan pompa hidraulik

POMPA JET

  • Pendahuluan
  • Persoalan gas
  • Ukuran Nozzle dan throat
  • Langkah-langkah pada perhitungan Jet pump
  • Grafik Kelakuan pompa
  • Menggunakan program mesin hitung
  • Hasil lapangan

PCV (PROGRESSIVE CAVITY PUMP)

  • Pendahuluan
  • Deskripsi Peralatan
  • Elastomer
  • Perancangan

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Practical Pumping Metdods For Petroleum Production System 2024:

  • 27-29 Mei 2024 Bali
  • 24-26 Juni 2024 Surabaya
  • 22-24 Juli 2024 Bogor
  • 26-28 Agustus 2024 Bali
  • 23-25 September 2024 Jakarta
  • 21-23 Oktober 2024 Yogyakarta
  • 25-27 November 2024 Bandung

INVESTASI (TIDAK TERMASUK BIAYA AKOMODASI & PENGINAPAN):

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Petroleum Engineering and Geoscience Statistics

General Knowledge of Petroleum Engineering, Petroleum, Petroleum Engineering·

LATAR BELAKANG :

Setelah menyelesaikan Training Petroleum Engineering and Geoscience Statistics ini diharapkan peserta dapat :

  • Memahami prinsip dasar teori dan aplikasi statistik untuk pengolahan data teknik perminyakan dan geoscience
  • Melakukan diagnosis terhadap data operasi perminyakan dan data geoscience, seperti data geologi produksi, data batuan dan fluida reservoir, data produksi, data operasi pemboran bahkan data anailisis keekonomian
  • Membuat analisis terhadap data tersebut dan melakukan pengolahannya dengan mempergunakan metoda statistik
  • Melakukan perhitungan-perhitungan kuantitatip dari seluruh data perolehan operasi perminyakan : geologi produksi, evaluasi data formasi produktip,  data reservoir, data pemboran, data produksi bahkan data keekonomian

PRE-REQUISITE :

  • Mempunyai pengetahuan dasar perminyakan
  • Mempunyai pengetahuan dasar statistika dan matematika sederhana

AUDIENCE :

Engineer/Non-Engineer

MATERI TRAINING :

Pendahuluan

  • Statistik Dalam Teknik Perminyakan dan Geoscience
  • Teknik Pengukuran
  • Harga Medium dan Rata-Rata
  • Fisika Aliran
  • Perkiraan Ketidakaturan

Konsep Dasar

  • Dasar-Dasar Teori Kemungkinan
  • Teorema Bayes

Distribusi Univariate (Variabel Tunggal)

  • Fungsi Distribusi Kumulatip
  • Orde Statistik
  • Fungsi  Variabel Random
  • Metoda Monte Carlo
  • Sampling dan Statistik

Distribusi Variabel Tunggal.

  • Moments
  • Fungsi Distribusi Umum (PDF)
  • Truncated Data Set
  • Estimasi dan Assesmentnya

Pengukuran Heterogenitas

  • Definisi Tentang Heterogenitas
  • Pengukuran Statis
  • Pengukuran Dinamis
  • Parametrik dan Non Parametrik Testing Tentang Hipotesis

Analisis Bivariate.

  • Distribusi Terpadu
  • Covariance Fungsi X-Y
  • Distribusi Normal Terpadu
  • The Reduced Major Axis (Rma) dan Garis Regresi
  • Analisis Bivariate Linier
  •  Analisis Bivariate Lanjut
  • Regresi Multivariate

Analisis Hubungan Spasial

  • Jenis Data
  • Variabel Nominal
  • Pengukuran Autokorelasi
  • Semivariogram pada Media Hipotetis
  • Semivariogram pada Media Nyata
  • Bias dan Presisi
  • Model-Model

Pemodelan Media Geologi

  • Titik Pandang Statistik
  • Krigging dan Jenis-Jenisnya
  • Simulasi Kondisional
  • Simulated Annealing

Pemodelan Reservoir

  • Peran Geologi
  • Analisis dan Inferensi
  • Pemodelan Aliran
  • Pembuatan Model

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Petroleum Eng and Geoscience Statistics tahun 2024:

  • 06-08 Mei 2024 Bandung
  • 04-06 Juni 2024 Malang
  • 02-04 Juli 2024 Surabaya
  • 06-08 Agustus 2024 Yogyakarta
  • 03-05 September 2024 Surabaya
  • 02-04 Oktober 2024 Bogor
  • 05-07 November 2024 Bali
  • 03-05 Desember 2024 Surabaya

INVESTATION YEAR 2018 (NOT INCLUDE HOTEL ACCOMODATION):

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Oil and Gas Surface Production Operation Facilities and Maintenance

Petroleum·

 OBJECTIVES :

After participate in this Training Oil and Gas Surface Production Operation Facilities and Maintenance, the participants will be able and capable to :

  • Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology and equipment performance maintenance in field application.
  • Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

BAHAN AJAR

Oil Handling and Processing Facilities and Maintenance
Oil Well Surface Production Equipment and Operation

  • Oil Well Equipment
  • Oil Well Production Operation
  • Well Automatic Safety Device

Oil Gathering System. Manifold and Flowline

  • Oil Gathering System
  • Maniflod System
  • Flowline Sizing and Design

Crude Oil and Gas Separation

  • Separator and Principle of Separation
  • Design of Separator
  • Oil Dehydration

Principles of Measurement

  • Introduction to Measurement
  • Crude Oil Measurement
  • Gas Measurement

Well Test

  • Introduction
  • Responsibility for Test
  • Preparation for Test
  • Types of Well Test
  • Equipment and Procedures
  • Accuracy of Fluid Measurement
  • Problem in Testing
  • Type of Test

Gas Handling and Processing Facilities and Maintenance
Introduction to Gas Handling and Facilities

Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservioir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Gas Compression

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition

Gas Processing

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

PESERTA YANG DIREKOMENDASIKAN

Tidak ada persyaratan khusus untuk mengikuti Training Oil and Gas Surface Production Operation Facilities and Maintenance ini, karena pelatihan ini sangat penting diikuti oleh seluruh praktisi di sektor minyak dan gas bumi dikarena akan banyak membahas secara mendetail proses produksi minyak dan gas bumi termasuk didalamnya proses dan maintenance, dimana akan banyak diberikan pengetahuan dan skill dalam melakukan analisa dilapangan sehingga mampu membuat dan merencanakan pengembangan-pengembangan yang mungkin dilakukan dalam rangka meningkatkan kapasitas produksi minyak dan gas. Diantara mereka yang harus hadir dalam pelatihan ini yaitu level operator hingga engineer baik yang baru berkecimpung maupun yang sudah menjadi senior disektor MIGAS

METODE PELAKSANAAN

Dalam Training Oil and Gas Surface Production Operation Facilities and Maintenance ini, menggunakan metode interaktif, yaitu pemahaman dari sisi konsep, contoh aplikasi, berlatih menuangkan konsep, diskusi interaktif dan studi kasus sehingga peserta dapat lebih mudah memahami dan menguasai materi yang diajarkan

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Oil and Gas Surface Production Operation Facilities and Maintenance Year 2024:

  • 29-31 Mei 2024 Bandung
  • 26-28 Juni 2024 Yogyakarta
  • 24-26 Juli 2024 Jakarta
  • 28-30 Agustus 2024 Bali
  • 25-27 September 2024 Bogor
  • 23-25 Oktober 2024 Surabaya
  • 27-29 November 2024 Bandung

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • IDR. 11.000.000,-/participant (Jakarta)
  • IDR. 11.000.000-/participant (Bandung)
  • IDR. 12.000.000,-/participant (Yogyakarta)
  • IDR. 14.000.000,-/participant (Bali)
  • IDR. 14.750.000,-/participant (Lombok)
  • US$ 4780/participant (Malaysia)

Available on request for time, place and facilities call us for more information

 

Training Gas Technology and Operation

Petroleum·

OBJECTIVES :

After participate in this training, the participants will be able and capable to :

  • Understand the basic concept of gas handling processes and operation, and how to operate this technology in field application.
  • Diagnostic of gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of gas handling processes and operation.

AUDIENCE:

No specified  (Operator/ Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Introduction to Gas Process and Operation

Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas-Water System
  • Gas-Condensate System

Gas Reservoir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Gas Compression

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection
  • Flow Measuring
  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition

Gas Processing

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Gas Technology and Operation year 2024:

  • 20-22 Mei 2024 Bandung
  • 04-06 Juni 2024 Malang
  • 02-04 Juli 2024 Surabaya
  • 06-08 Agustus 2024 Yogyakarta
  • 03-05 September 2024 Surabaya
  • 02-04 Oktober 2024 Bogor
  • 05-07 November 2024 Bali
  • 03-05 Desember 2024 Surabaya

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • IDR. 11.000.000,-/participant (Jakarta)
  • IDR. 11.000.000-/participant (Bandung)
  • IDR. 12.000.000,-/participant (Yogyakarta)
  • IDR. 14.000.000,-/participant (Bali)
  • IDR. 14.750.000,-/participant (Lombok)
  • US$ 4780/participant (Malaysia)

Available on request for time, place and facilities call us for more information

Training Beam (Sucker Rod) Pump

Petroleum, Production Engineering, Production System & Design·

SUMMARY

Training Beam (Sucker Rod) Pump – This course is to summarize the state of the art of sucker rod pump technology. It included the example problems to illustrate the use of various theoretical solutions, it also listed an overview of conventional well productivity and Inflow Performance Relationship (IPR) technology and is general introduction to the latest methods of  production optimization using sucker rod pump technology. Ever sinceAugust 29, 1859, When Colonel Drake discovered oil inTitusville,Pennsylvania, man has been trying to lift oil from non-flowing wells through some artificial method. Unfortunately, regardless the method selected, we seem to do it very inefficiently most of the time. Since the Drake discovery, the equipment available for this purpose has improved tremendously. And so has the technology to our best advantage. The truth is that we waist millions each year in the initial installation and subsequent repair and maintenance of artificial lift equipment that was the wrong type for the particular well from beginning. Designing a sucker rod pump installation is not an exact science; it is mostly an art. But it is a talent which can be easily acquired if care and attention are paid to what the well is telling us, and what we want to do with the well. The well conditions vary from one well to other, but the basic information required for a design does not. What we require from a particular well must, of course, be within the limits of the well in question. Sucker rod pump design provided information required for analyzing the behavior of a productivity well interval using rod pump. This thus makes it possible to answer some fundamental questions:

  1. What is the well producing capacity?
  2. What fluids do they produce?
  3. At what flow rates?
  4. What is the rod pump to use?

In this course, it  has also included example problems to illustrate the use of various theoretical solution. Wherever possible, it has not only discussed practical difficulties that one may encounter while using the theoretical solutions, but it has also listed some of the method that one can used to obtain the desired information. It also included descriptions on field histories wherever they were available and trouble shooting using sucker rod pump. This course is mainly directed to the practicing professionals who make engineering calculations and decision on sucker rod pump application. For managers, the course helps to review the present state of the art. It also outlined some of new method in artificial technology that exist today. These gaps in technology will be useful for research engineers and research professionals to determine the areas of future research.

OUTLINE

INTRODUCTION

  • The Origine of Petroleum
  • Basic Exploration
  • Basic Drilling and Completion
  • Basic Production Engineering

ARTIFICIAL LIFT METHOD

  • The Sucker Rod Pump
  • The Hydraulic Pump
  • The Submersible Pump
  • Gas Lift
  • Free Piston Lift

DETERMINING THE BEST METHOD FOR THE WELL

  • Lease Considerations
  • Well and Reservoir Analysis
  • Equipment Parameters
  • Conclusion

THE SUCKER ROD PUMP LIFTING METHOD

  • Background And History
  • Sucker Rod Pumping
  • The Pumping Unit
  • The Wellhead
  • The Polished Rod
  • The Sucker Rod
  • The Sucker Rod Pump

SUCKER ROD PUMP CLASSIFICATIONS

  • API Pump
  • API Pump Designations
  • Tubing Pumps
  • Traveling Barrel,Bottom Hold-Down Insert Pumps
  • Stationary Barrel,Bottom Hold-Down Insert Pumps
  • Stationary Barrel,Top Hold-Down Insert Pumps
  • Stationary Barrel,Top And Hold-down Insert Pump
  • Special Pumps
  • The Axelson ”VOLUMAX”
  • The Axelson “SAN’PUMP”
  • The Axelson “TRIAX”
  • The Axelson ”HOLLOW TUBE”
  • The Axelson ”CIRCLE-A”
  • Pump Parts And Fittings
  • Barrel Tubes
  • Cages
  • Plungers
  • The Axelson “Ring Valve”
  • Balls and Seats
  • Other Fittings

DESIGNING THE INSTALLATION

  • Analsys Of The Well
  • Selecting The Subsurfaces Oil Well Pump
  • Determining The Pump Bore Size
  • Choosing The Pump Type
  • Selection of Materials
  • Beam Pumping
  • The Dynamometer Card
  • Determining Favorable Pumping Speeds
  • Establishing Production Rates
  • Peak Polished Rod Loads
  • Maximum Rod Stress
  • Minimum Polished Rod Load
  • PolishedRodLoadRange
  • Peak Torque
  • Polished Rod Horsepower
  • Pump And Rod Installation Design
  • Plunger Slippage And Fits
  • Designing the Sucker Rod String
  • Specific Information Required
  • Sucker Rod String Design Charts
  • The Rod String Load Ratio
  • Sucker Rod Couplings
  • Sucker Rod Coupling Displacement
  • The Inhibitor Program

INSTALLATION, OPERATING AND TROUBLE SHOOTING THE PUMP

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

081382807230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Beam (Sucker Rod) Pump 2024:

  • 06-08 Mei 2024 Bogor
  • 03-05 Juni 2024 Bali
  • 01-03 Juli 2024 Jakarta
  • 05-07 Agustus 2024 Yogyakarta
  • 02-04 September 2024 Bandung
  • 01-03 Oktober 2024 Surabaya
  • 04-06 November 2024 Bogor
  • 02-04 Desember 2024 Malang

INVESTATION (NOT INCLUDE HOTEL ACCOMODATION): 

Online Class

  • Rp.5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

Training Work Over, Well Service and HSE

Petroleum·

081289311641MAKSUD & TUJUAN TRAINING WORK OVER, WELL SERVICES AND HSE

Setelah menyelesaikan Training Work Over, Well Service and HSE  ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar penyelesaian sumur produksi minyak dan gas bumi (oil and gas well completion)  .
  • Melakukan diagnosis sederhana dalam menagani problema pada sumur produksi di lapangan yang disebabkan oleh reservoir atau fasilitas produksinya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk sumur-sumur minyak yang diproduksikan dengan cara gas lift, ESP, Hydraulic/Jet Pump, Sucker Rod Pump dan PCP.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perancangan dan perancangan ulang penanganan problema kepasiran di sumur produksi dengan pertimbangan HSEnya.

PRE-REQUISITE :

Latar belakang  : Operator/ Sr. Operator/ Jr. Engineer/Non Engineer

MATERI TRAINING WORK OVER, WELL SERVICES AND HSE

Pendahuluan
Penyelesaian sumur (Well Completion)
Tipe-tipe penyelesaian sumur

  • Tipe penyelesaian sumur berdasarkan pemasangan pipa selubung
  • Tipe penyelesaian sumur berdasarkan jumlah zona produksi

Peralatan bawah tanah

  • Pendahuluan
  • Peralatan produksi bawah sumur

Penyelesaian sumur untuk sumur-sumur pengangkatan buatan

  • Sucker Rod Pump (Pompa angguk)
  • Electric Submersible Pump
  • Gas lift
  • Hydraulic Pump
  • Pompa Jet

Kerja ulang sumur (Work Over)
Faktor-faktor penyebab kehilangan produksi

  • Problem Reservoir
  • Problem mekanikal

Perawatan sumur

  • Kerusakan Peralatan
  • Masalah Parafin
  • Pengendapan Scale dan Pengontrolannya
  • Masalah Pasir
  • Kerusakan Formasi

Tipe-tipe Pengerjaan Kerja Ulang Sumur

  • Mengubah Zona Produksi
  • Perangsangan Sumur (Well Stimulation)
  • Squeeze Cementing

Peralatan Kerja Ulang

  • Menara (Rig) Konvensional
  • Unit Wireline
  • Gulungan Tubing Tanpa Sambungan (Endless Tubing Coil)
  • Unit Snubbing

Sand Control Technology
Sand Control Concept

  • Reason for Sand Control
  • Determining Need for Sand Control
  • Selecting Type of Control
  • Proper Drilling and Completion

Gravel and Screen Selection

  • Slot and Gravel Size Design
  • Slotted Liners
  • Screens
  • Prerpacks

Inside Gravel Packing

  • Perforation Packing
  • Two Stages Methods
  • Use of Viscous Carrying Fluid
  • Downhole Equipment
  • Type of Operation
  • Sigle Stage Methods

Open Hole Gravel Packing

  • Conventional Methods
  • Special Tools and Operations
  • Zone Isolation Methods
  • Model Study Result
  • Deviated Well Problem and Solutions

Consolidation

  • Formation Consolidation
  • Consolidation System Features
  • Well Preparation and Design Factor
  • Consolidated  Packs
  • Water Base Systems
  • Thermosetting Gravel Packs

Stable Arc Sand Control

  • The Stable Concept
  • Applying Stress for Sand Control
  • Conventional Cementing Limitations
  • Downhole Equipment
  • Type of Operation

HSE  aspect in workover and well services

  • Peraturan Perundangan tentang K3L
  • Pengauh Gas Beracun pada Operasi Pemboran
  • Pengaruh  Gas Beracun Bagi Kesehatan
  • H2S
  • Gas Detection Equipments

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal TRAINING WORK OVER, WELL SERVICES AND HSE 2024 :

  • 20-22 Mei 2024 di Medan
  • 19-21 Juni 2024 Jakarta
  • 17-19 Juli 2024 Bali
  • 21-23 Agustus 2024 Yogyakarta
  • 18-20 September 2024 Bogor
  • 23-25 Oktober 2024 Surabaya
  • 20-22 November 2024 Bandung
  • 18-20 Desember 2024 Yogyakarta

INVESTASI (TIDAK TERMASUK BIAYA AKOMODASI & PENGINAPAN) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Applied Water Technology

Petroleum, Processing, Production System & Design·

LATAR BELAKANG :

Setelah menyelesaikan training  ini diharapkan peserta dapat :

  • Memahami dasar-dasar kimia air dan penggunaannya untuk keperluan operasi produksi-injeksi reservoir minyak, gas dan reservoir panas bumi.
  • Memahami cara-cara pengambilan sample air di lapangan dan cara analisis kandungan kimianya pada sumur-sumur produksi minyak, gas dan panas bumi.
  • Memahami prinsip-prinsip dasar penggunaan peralatan untuk  pelaksanaan  pengujian sifat-sifat air di lapangan minyak, gas dan panas bumi.
  • Melakukan diagnosis sederhana dan melakukan penyelesaian persoalan yang berkaitan dengan pembentukan scale oleh air formasi yang turut terproduksi ke permukaan.
  • Melakukan diagnosis sederhana dan melakukan penyelesaian persoalan yang berkaitan dengan terjadinya korosi oleh air formasi yang turut terproduksi ke permukaan.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk keperluan pelaksanaan injeksi air dan cara penanganan kandungan mikrobiologisnya.
  • Mempergunakan pengetahuan spesifik untuk keperluan penanganan air formasi bila termasuk pada water disposal system.

PRE-REQUISITE :

Latar belakang  : Operator, Senior Operator, Engineer, Non Engineer

MATERI KURSUS :

  • Fundamental of Chemistry
  • The Chemistry of Water
  • Chemical and Physical Properties
  • Sampling
  • Quantitative Analysis

DURASI

3 Hari

Online Class

  • Rp.5.500.000/peserta (Online Zoom meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

081382807230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Applied Water Technology 2024 :

  • 20-22 Mei 2024 di Medan
  • 19-21 Juni 2024 Jakarta
  • 17-19 Juli 2024 Bali
  • 21-23 Agustus 2024 Yogyakarta
  • 18-20 September 2024 Bogor
  • 23-25 Oktober 2024 Surabaya
  • 20-22 November 2024 Bandung
  • 18-20 Desember 2024 Yogyakarta

Training Gas Processing Principles Operation

Petroleum·

OBJECTIVES :

After participate in this training, the participants will be able and capable to :

  • Understand the basic concept of gas handling processes and operation, and how to operate this technology in field application.
  • Diagnostic of gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of gas handling processes and operation.

AUDIENCE:

No specified  (Operator/ Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Introduction to Gas Process and Operation

Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservoir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Gas Compression

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • ulfur Deposition

Gas Processing

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Gas Processing Principles Operation year 2024 :

  • 20-22 Mei 2024 di Medan
  • 19-21 Juni 2024 Jakarta
  • 17-19 Juli 2024 Bali
  • 21-23 Agustus 2024 Yogyakarta
  • 18-20 September 2024 Bogor
  • 23-25 Oktober 2024 Surabaya
  • 20-22 November 2024 Bandung
  • 18-20 Desember 2024 Yogyakarta

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • IDR. 11.000.000,-/participant (Jakarta)
  • IDR. 11.000.000-/participant (Bandung)
  • IDR. 12.000.000,-/participant (Yogyakarta)
  • IDR. 14.000.000,-/participant (Bali)
  • IDR. 14.750.000,-/participant (Lombok)
  • US$ 4780/participant (Malaysia)

Available on request for time, place and facilities call us for more information

Training Subsurface and production Downhole

Petroleum·

LATAR BELAKANG :

Setelah menyelesaikan training ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar penggunaan peralatan sumur produksi di bawah permukaan, untuk lapangan-lapangan minyak dan gas bumi .
  • Melakukan diagnosis sederhana dalam menagani problema produksi di lapangan yang disebabkan oleh reservoir atau fasilitas produksinya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk gas lift, ESP, Hydraulic/Jet Pump, Sucker Rod Pump dan PCP.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perancangan dan perancangan ulang gas lift, ESP, Hydraulic/Jet Pump, Sucker Rod Pump dan PCP yang disesuaikan dengan perubahan kemampuan produksi sumur.

PESERTA YANG DIREKOMENDASIKAN :

Latar belakang  : Operator/ Sr. Operator/ Jr. Engineer/Non Engineer

MATERI TRAINING :

Reservoir Background

  • Exploration
  • Exploitation
  • Reserve Calculation

Basic Production Engineering

  • Inflow Performance Relationship
  • Productivity Index
  • Multiphase Flow

Well Completion System

  • Open Hole Completion
  • Single Completion
  • Commingle Completion
  • Multiple Completion

Downhole Equipments

  • Tubular Device
  • Packer System
  • Circulating Device
  • Nipples
  • Joints

Natural Flow Well Subsurface Production Equipement Design

  • Perforation Design
  • Gravel Pack Design
  • Tubing String Design

Artificial Lift Method Equipments and Design

  • Gas Lift
  • Submersible Pump
  • Sucker Rod Pump
  • Hydraulic Pump
  • Jet Pump Design

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul pelatihan,Training kit, Lunch, Coffe break, Pelatihan dilaksanakan di hotel berbintang

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Subsurface and production Downhole tahun 2024:

  • 28-30 Mei 2024 Bali
  • 25-27 Juni 2024 Malang
  • 23-25 Juli 2024 Surabaya
  • 27-29 Agustus 2024 Bali
  • 24-26 September 2024 Bandung
  • 22-24 Oktober 2024 Yogyakarta
  • 26-28 November 2024 Bogor
  • 17-19 Desember 2024 Malang

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Gas Lift Operation & Trouble Shooting

Petroleum·

OBJECTIVE

This training will provide technical knowledge on principle of Gas Lift Operation and Trouble Shooting  operation especially in a artificial lift oil well. This training will emphasize on Gas Lift design, operation, trouble shootings and how to conduct a tear down inspection. New concept of gas optimization, will also be discussed. After completion of this training, the participant will gain technical knowledge on installing & trouble shooting of Gas Lift.

Benefit :

After completion of this training, the participant will gain technical knowledge on installing & trouble shooting Gas Lift.

WHO SHOULD ATTEND :

  • Production engineers
  • Production maintenance engineers
  • Production operators
  • Petroleum engineers
  • Any person who involved in petroleum production process or any person who wish to know about Gas Lift.

 TRAINING CONTENT :

Tipe Gas Lift System

  • Continuous Flow Gas Lift
  • Intermitten Flow Gas Lift

Keuntungan dan Batasan Pemilihan Gas Lift

Peralatan Gas Lift

Tipe Valve Gas Lift

Kerja Valve pada Gas Lift

Tipe Gas Lift Installation

Perencanaan Gas Lift secara Grafis

  • Continuous Gas Lift
  • Intermittent Gas Lift

Gas Lift Equipment

Gas Lift Trouble Shooting

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Gas Lift Operation & Trouble shooting year 2024:

  • 13-15 Mei 2024 Bogor
  • 10-12 Juni 2024 Bali
  • 08-10 Juli 2024 Jakarta
  • 12-14 Agustus 2024 Yogyakarta
  • 09-11 September 2024 Bandung
  • 07-09 Oktober 2024 Surabaya
  • 11-13 November 2024 Bogor
  • 09-11 Desember 2024 Malang

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

 

Butuh bantuan! Klik disini

Kami siap membantu, silahkan berkomunikasi langsung dengan Tim Kami yang sedang online saat ini. Jika jaringan sedang sibuk, mungkin karena sedang melayani pelanggan lain. Untuk respon cepat silahkan kirim email ke: [email protected] untuk pelayanan via Help Desk

Customer Support

Mei Dwi - Head Office

Online

Customer Support

Umu Hanifatul - Head Office

Online

Customer Support

Eva Arlinda - Head Office

Online

Customer Support

Andini Eryani - Head Office

Online

Mei Dwi - Head OfficeCustomer Support

Hi, Ada yang Bisa saya bantu pak/bu? 00.00

Umu Hanifatul - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Eva Arlinda - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Andini Eryani - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00