Training Basic Reservoir Engineering

Course Objectives :

  • Understand the basic concepts of reservoir engineering
  • Understand the basic calculations of the reserve and recovery of an oil or gas reservoir
  • Understand the techniques and procedures of sand control, acidizing, and hydraulic fracturing to increase recovery from a reservoir
  • Understand the basics of oil and gas flow behavior in reservoir
  • Knowledge of Enhanced Oil Recovery purpose and techniques

Who Should Attend

Reservoir Engineer, Geologists, Project Engineers, Production Supervisors and Engineers, Well Service Supervisors and Engineer, Workover Supervisors and Engineers, etc.

Course Contents :

Oil & Gas Reservoir

  • Accumulation of Organic Material in Sediment
  • Organic Accumulation Environment
  • Oil & Gas Existence in Reservoir

Reservoir Fluid & Rock Properties

  • Porosity
  • Permeability
  • Reservoir Parameter Measurement
  • Oil Components
  • Oil Phase
  • Phase Behavior

Fluid Distribution in Reservoir

  • Wettability
  • Surface Tension
  • Capillary Pressure
  • Fluid Distribution

Reservoir Driving Mechanism

  • Water drive
  • Depletion drive
  • Gas cap drive
  • Combination

Reserve Estimation & Recovery Factor

  • Estimation of oil-gas in place
  • Estimation of reserve
  • Estimation of recovery factor

Reserve Estimation & Decline Curve

  • Volumetric Method
  • Material Balance Method
  • Saturated Reservoir
  • Undersaturated Reservoir
  • Gas Reservoir
  • Decline Curve

Basic of Fluid Flow

  • Darcy Law
  • Fluid Viscosity
  • Fluid Compressibility
  • Reservoir Fluid Flow
  • Poiseuilles Capillary Law
  • Productivity Index
  • Zonal damage and well stimulation

Formation Evaluation

  • Purpose of Formation Evaluation
  • Formation Evaluation Method
  • Logging Equipment
  • Log Analysis

Well Testing

  • Pressure Build Up testing
  • Pressure Draw Down testing
  • Production Testing

Acidizing

  • Basic Acidizing
  • Acidizing Types
  • Acidizing Considerations
  • Acid in Stimulation
  •  Acidizing Design

Hydraulic Fracturing

  • Damage around Wellbore
  • Fracturing Considerations
  • Rock Properties & Measurement
  • Fracture Geometry
  • Fracturing Operation Design
  • Case Problem

Enhanced Oil Recovery (EOR)

  • Water flooding
  • Thermal
  • Chemical
  • Miscible flooding

Field Management

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

081382807230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Basic Reservoir Engineering year 2024 :

  • 27-29 Mei 2024 Bali
  • 24-26 Juni 2024 Surabaya
  • 22-24 Juli 2024 Bogor
  • 26-28 Agustus 2024 Bali
  • 23-25 September 2024 Jakarta
  • 21-23 Oktober 2024 Yogyakarta
  • 25-27 November 2024 Bandung

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp.5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

 

Training Quantitative Log Analysis and Petrophysics

LATAR BELAKANG

Setelah menyelesaikan Training Quantitative Log Analysis and Petrophysics ini diharapkan peserta dapat :

  • Memahami prinsip dasar dan teknologi mutahir tentang logging batuan termasuk cased hole logging.
  • Melakukan diagnosis sifat-sifat sumuran dan evaluasi reservoir dengan interpretasi hasil logging conventional maupun cased holed logging.
  • Membuat analisis dan dapat menentukan kemampuan produksi sumuran dari interpretasi data logging
  • Memengerti prinsip-prinsip modern untuk perhitungan wellsite computed log

PESERTA

Operator/Sr. Operator/Engineer/Non-Engineer/Jr. Geologist

PRE-REQUISITE :

  • Mempunyai pengetahuan dasar geologi hidrokarbon
  • Mempunyai pengetahuan dasar evaluasi formasi dan reservoir hidrokarbon

MATERI TRAINING :Pengertian Tentang Lingkungan Logging Konvensional

  • Geometri Sumuran Hidrokarbon
  • Pelaksanaan Logging
  • Gangguan-gangguan yang terjadi

Evaluasi Hidrokarbon

  • Dasar-dasar interpretasi
  • Pengaruh Invasi Lumpur

Zona Permeabel

  • SP Log
  • Gamma ray Log
  • Electromagnetic Log

Log untuk Clean Formation

  • Resistivity-Porosity Crossplot
  • Identifikasi Multimineral

Log untuk Shaly Formation

  • Distribusi Shale dan Clay
  • Cation Excvhage Capacity
  • Model Interpretasi Shaly sand
  • Metoda Dual Water

Penentuan Produktivitas Sumuran

  • Permeabilitas dan Penentuannya
  • Saturasi Air Irreducible
  • Multiple Formation Tester

Wellsite Computed Logs

  • Log Rwa
  • Porosity Overlay
  • Resitivity Overlay
  • SP Overlay
  • Cyberlook Log
  • Analisis Prolog

Electromagnetic Propagation Log

  • EPT Log
  • ADEPT : The Adaptable Tool
  • Interpretation Method
  • CRIM Method
  • CTA Method
  • Tpo Method
  • Endfire Array
  • Brodside Array
  • Deep Propagation Tool (DPT)

Formation Evaluation in Cased Hole

  • Logs for Cased Hole Formation Evaluation
  • Natural Gamma Ray Log
  • Neutron Log
  • Sonic Log
  • Thermal Decay Time Log  (TDT)
  • Gamma Ray Spectromerty Tool (GST)
  • Cement Evaluation
  • CBL/VDL Measurement
  • Compesated Cement Bond Tool
  • Cement Evaluation Tool

INVESTASI (TIDAK TERMASUK BIAYA AKOMODASI & PENGINAPAN): 

  • Rp. 10.500.000,-/peserta (Jakarta)
  • Rp. 10.500.000-/peserta (Bandung)
  • Rp. 11.500.000,-/peserta (Yogyakarta)
  • Rp. 13.000.000,-/peserta (Bali)
  • Rp. 13.750.000,-/peserta (Lombok)

DURASI

3 Hari

FASILITAS

Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

INFORMASI & PROMO

Hub : 021 – 756 3091

Fax : 021 756 3291

CONTACT PERSON

0852  1000 5065, 0813 8280 7230

JADWAL TRAINING QUANTITATIVE LOG ANALYSIS AND PETROPHYSICS TAHUN 2024 :

  • 06-08 Mei 2024 Bogor
  • 03-05 Juni 2024 Bali
  • 01-03 Juli 2024 Jakarta
  • 05-07 Agustus 2024 Yogyakarta
  • 02-04 September 2024 Bandung
  • 01-03 Oktober 2024 Surabaya
  • 04-06 November 2024 Bogor
  • 02-04 Desember 2024 Malang

Training Well Optimization Artificial Lift, Gas Lift, Well Optimization, Troubleshooting

TARGET & TUJUAN TRAINING :

Setelah menyelesaikan training  ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan reservoir minyak bumi yang berhubungan dengan penggunaan gas-lift, sucker-rod, electric submersible, hydraulic dan jet pump.
  • Melakukan diagnosis sederhana dan memengerti pengelolaan data sumuran minyak yang diproduksi dengan, gas lift, sucker rod pumping, electric submersible, hydraulic dan jet pump.
  • Membuat analisis sederhana terhadap data sumuran minyak, melakukan perhitungan-perhitungan kinerja sumuran sebagai hasil dari pemompaan dengan berbagai metoda sesuai dengan keadaan reservoirnya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dan melakukan optimisasi produksi untuk sumuran minyak yang diproduksi dengan gas lift, sucker rod pumping, electric submersible, hydraulic dan jet pump sesuai dengan batasan operasinya.

PESERTA YANG DIREKOMENDASIKAN :

Latar belakang  : Operator/Sr. Operator/ Jr.Engineer/Engineer

MATERI TRAINING :

SISTEM PRODUKSI LAPANGAN MINYAK BUMI

  • Sistem Produksi Alamiah
  • Sistem Produksi Dengan Pengangkatan Buatan

GAS LIFT (GL)

  • Pendahuluan
  • Gas Lift Continu dan Intermittent
  • Komponen Alat Utama Gas Lift
  • IPR dan Perancangan Gas Lift
  • Optimisasii dan Alokasi Gas untuk Gaslift
  • Sistem Produksi Dengan Pengangkatan Buatan oleh Gas Lift
  • Gas Lift Trouble shooting

SUCKER ROD PUMP (SRP)

  • Pendahuluan
  • Pump Intake Curve
  • Optimisasi Produksi
  • Rancangan Sucker Rod Pump API RP11L
  • Komponen Alat Utama
  • Faktor-faktor yang mempengaruhi gerakan rod
  • Perencanaan pompa
  • Dynagraph & Dynamometer
  • SRP Trouble shooting

PROGRESSIVE CAVITY PUMP (PCP)

  • Pendahuluan
  • Deskripsi Peralatan
  • Elastomer
  • Perancangan
  • PCP Trouble shooting

ELECTRIC SUBMERSIBLE PUMP (ESP)

  • Pendahuluan
  • Dasar-dasar perhitungan ESP
  • Konstruksi ESP
  • Karakteristik pompa SRP
  • Cara Memilih jenis pompa
  • Aplikasi di Lapangan
  • ESP Trouble shooting

POMPA HIDRAULIK

  • Alat-alat permukaan
  • Jenis-jenis unit pompa
  • Jenis-jenis unit pompa
  • Ukuran pompa
  • Langkah-langkah pada pemilihan pompa hidraulik
  • Hydraulic Pumps Trouble shooting

POMPA JET

  • Pendahuluan
  • Persoalan gas
  • Ukuran Nozzle dan throat
  • Langkah-langkah pada perhitungan Jet pump
  • Grafik Kelakuan pompa
  • Menggunakan program mesin hitung
  • Hasil lapangan
  • Jet Pump Trouble shooting

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230,  0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Well Optimization Artificial Lift, Gas Lift, Well Optimization, Troubleshooting tahun 2024:

  • 29-31 Mei 2024 Bandung
  • 26-28 Juni 2024 Yogyakarta
  • 24-26 Juli 2024 Jakarta
  • 28-30 Agustus 2024 Bali
  • 25-27 September 2024 Bogor
  • 23-25 Oktober 2024 Surabaya
  • 27-29 November 2024 Bandung

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Nodal Analysis and Production Optimization

TARGET DAN TUJUAN :

Setelah menyelesaikan training  ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan optimisasi produksi sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksannaan optimisasi produksi ini untuk meningkatkan kinerja produksi sumuran dan lapangan.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian optimisasi produksi dengan analisis nodal.
  • Membuat analisis sederhana terhadap data sumuran minyak, gas dan panas bumi , melakukan peramalan kinerja dan merencanakan pengembanganya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dari seluruh data perolehan data tubing, flowline, choke, perforasi, gravel-pack, sub-surface savety valve pada sumuran, merencanakan pengembangannya dengan memperhitungan kemampuan masing-masing sumuran.
  • Mempergunakan pengetahuan optimisasi untuk aplikasi dalam cara pengkatan buatan dengan gas-lift, submersible-pump, sucker rod pump dan hidraulic pump.

PESERTA YANG DIREKOMENDASIKAN :

Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

MATERI TRAINING :

Production System Analysis

  • Nodal System Analysis Model
  • Nodal System Analysis  Application

Reservoir Performance

  • Equations and Inflow Performance Relationship
  • Real-Time Performance of Oil Wells
  • Performnace Prediction of Oil Wells
  • Real-Time Performance of Gas Wells
  • Performnace Prediction of Gas Wells
  • Effect of Water Production

Pressure Drop of Fluid Flow in Pipes

  • General Equations and Concepts
  • Fluid Properties : Density,Compressibility Factor etc.
  • Well-Flow Correlations
  • Pipeline Flow Correlations
  • Chokes and Valves Pressure Drop
  • Effect of Velocity

Total System Analysis

  • Tubing Design
  • Flowline Size
  • Effect of Stimulation
  • Chokes and Valves
  • Effect of Completion

Artificial Lift Method

  • Gas Lift
  • Submersible Pump
  • Succker Rod Pump
  • Hydraulic Pump

Nodal Analysis in Specific Field Application

  • Pressure Drop Calculation in Steam Line
  • Pressure Calculation in Injection Wells
  • Pressure Calculation in Production Wells
  • Total Analysis Approach

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Normal Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Nodal Analysis and Production Optimization tahun 2024:

  • 13-15 Mei 2024 Bogor
  • 10-12 Juni 2024 Bali
  • 08-10 Juli 2024 Jakarta
  • 12-14 Agustus 2024 Yogyakarta
  • 09-11 September 2024 Bandung
  • 07-09 Oktober 2024 Surabaya
  • 11-13 November 2024 Bogor
  • 09-11 Desember 2024 Malang

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Pump and Turbine Selection,Design and Operation for Oil and Gas Production Facilities

OBJECTIVES :

After participate in this training, the participants will be able and capable to :

  • Understand the basic concept of oil and gas handling with surface processes and operation facilities , and how to operate pump and turbine technology in field application.
  • Diagnostic of oil and gas flow  performance under actual pumping drive mechanism and future performance with current handling processes.
  • Analyze the production flow potential of oil and gas flow under actual handling facilities system processes and to plan the better development processes according to fluid flow capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects the phenomena of oil and gas handling processes and operation with given surface facilities and pumping using turbine system.

AUDIENCE:

No specified  (Operator/ Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Introduction to Oil and Gas Production Operation

Oil Surface Production Facilities

  • Well Equipments
  • Pigging System
  • Separator
  • Gas Scrubber
  • Gas Dehydarator
  • Pumps : Centrifugal, Reciprocating, Diaphragm

Gas Surface Processing Facilities

  • Gas Sweetening
  • Heat Exchanger
  • Fractination, Liquification, Refrigeration System
  • Compressor

Pump Basic Theory

  • Centrifugal Pump
  • Conservation of Mass
  • Specific Velocity
  • Pump Performance
  • Cavitation

Pump Specification

  • Pump Specification
  • Flow Capacity
  • Fluid Properties
  • Head
  • Net Positive Heads
  • Rotation Determination and Pump Types
  • Viscous Fluid Correction
  • Material Selection
  • Prime Movers Selection

Pump Application

  • Pump Instalation Plan
  • Pump Application Example

Pump Construction

  • Pump Classification by Impeller
  • Pump Classification by Casing
  • Pump Classification by Stage Number
  • Pump Classification by Axis Position

Pump Operation

  • Head Capasity Curve
  • Parallel and Serrial Operation
  • Capasity Regulator
  • Water Hummer
  • Surging
  • Pressure Fluctuation
  • Automatic Operation

Pump Instalation

  • Horizontal Instalation
  • Vertical Instalation
  • Submersible Instalation
  • Pipping System
  • Vibration and Noise Protection

Pump Maintenance

  • First Inspection
  • Operation Condition Obervation
  • Savety Instrument
  • Maintenace Management
  • Overhaul

Pump Trouble Shooting

  • General Trouble Shooting
  • Submersible Pump Trouuble Shooting

Turbine Fundamental Concept

  • Gas turbine thermodynamics
  • Machinery components analysis : Compressor, Combustor, Gas producer turbine and Power turbine, sealing system
  • Gas turbine performance
  • Off design behavior
  • Gas turbine material
  • Gas turbine control (speedtronic) and instrument

Gas Turbine operation and maintenance

  • Gas turbine predictive maintenance and preventive maintenance
  • (Vibration, lube oil analysis) and interval maintenance
  • Gas turbine failure and failure analysis (case study)
  • Life cycle cost (Cost effectives) of gas turbine
  • Selection and Application gas turbine of gas transmission and pumping

DURATION

3 Day

FASILITY

Normal Class

Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Pump and Turbine Selection,Design and Operation for Oil and Gas Production Facilities year 2024:

  • 20-22 Mei 2024 Bogor
  • 03-05 Juni 2024 Bali
  • 01-03 Juli 2024 Jakarta
  • 05-07 Agustus 2024 Yogyakarta
  • 02-04 September 2024 Bandung
  • 01-03 Oktober 2024 Surabaya
  • 04-06 November 2024 Bogor
  • 02-04 Desember 2024 Malang

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 13.750.000,-/peserta (Lombok)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Production Surface Facility Production,Process,Surface Equipment & Its Operation

OBJECTIVES :

After participate in this course, the participants will be able and capable to :

  • Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology and equipment performance maintenance in field application.
  • Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

AUDIENCE:

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Oil Handling and Processing Facilities and Maintenance
Oil Well Surface Production Equipment and Operation

  • Oil Well Equipment
  • Oil Well Production Operation
  • Well Automatic Safety Device

Oil Gathering System. Manifold and Flowline

  • Oil Gathering System
  • Maniflod System
  • Flowline Sizing and Design

Crude Oil and Gas Separation

  • Separator and Principle of Separation
  • Design of Separator
  • Oil Dehydration

Principles of Measurement

  • Introduction to Measurement
  • Crude Oil Measurement
  • Gas Measurement

Well Test

  • Introduction
  • Responsibility for Test
  • Preparation for Test
  • Types of Well Test
  • Equipment and Procedures
  • Accuracy of Fluid Measurement
  • Problem in Testing
  • Type of Test

Gas Handling and Processing Facilities and Maintenance
Introduction to Gas Handling and Facilities
Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservioir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Gas Compression

  •  Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition

Gas Processing

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Production Surface Facility Production,Process,Surface Equipment & Its Operation 2024:

  • 28-30 Mei 2024 Bali
  • 25-27 Juni 2024 Malang
  • 23-25 Juli 2024 Surabaya
  • 27-29 Agustus 2024 Bali
  • 24-26 September 2024 Bandung
  • 22-24 Oktober 2024 Yogyakarta
  • 26-28 November 2024 Bogor
  • 17-19 Desember 2024 Malang

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

REFERENSI :

  1. PT. Conocophillips Indonesia
  2. PT. Armindo Jaya Mandiri

Training Production Surface Facility Production,Process,Surface Equipment & ITS Operation

Training Scale in oil field Water

SASARAN BELAJAR :

Setelah menyelesaikan training ini diharapkan peserta dapat :

  • Memahami dasar-dasar pembentukan scale dan penggunaannya untuk keperluan operasi produksi-injeksi reservoir minyak, gas dan reservoir panas bumi.
  • Memahami cara-cara pengambilan sample air di lapangan dan cara analisis kandungan kimianya pada sumur-sumur produksi minyak, gas dan panas bumi.
  • Memahami prinsip-prinsip dasar penggunaan peralatan untuk  pelaksanaan  pengujian sifat-sifat air di lapangan minyak, gas dan panas bumi.
  • Melakukan diagnosis sederhana dan melakukan penyelesaian persoalan yang berkaitan dengan pembentukan scale oleh air formasi yang turut terproduksi ke permukaan.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk berbagai keperluan industri dan pelaksanaan injeksi air di lapangan dan cara penanganan kandungan mikrobiologisnya.
  • Mempergunakan pengetahuan spesifik untuk keperluan penanganan scale air formasi termasuk  scale clean out, scale squeeze dan acidizing.

PRE-REQUISITE :

Latar belakang  : Operator, Senior Operator, Engineer, Non Engineer

MATERI TRAINING  :

Kimia Air Formasi

Proses pembentukan Scale dan Faktor Penyebabnya

  • Scale Kalsium Karbonat
  • Scale Kalsium Sulfat
  • Scale BariumSulfat
  • Scale Besi
  • Field Analysis

Teknik Analisis Air Formasi

  • Identifiksi Jenis Scale

Penentuan Kecenderungan Pembentukan Scale

  • Kalsium Karbonat
  • Kalsium Sulfat dan Barium Sulfat

Penanggulangan Masalkah Scale

  • Menghilangkan Scale
  • Secara Mekanis
  • Secara Kimiawi
  • Pencegahan Scale
  • Secara Non Kimiawi
  • Secara Kimiawi

Penanggulangan Scale di Lapangan

  • Metoda Scale Clean Out
  • Metoda Scale Squeeze

Teknik Pengasaman

  • Jenis Asam
  • Jenis Aditive
  • Stimulasi Batuan Karbonat
  • Perencanaan Stimulasi Asam
  • Kriteria Keberhasilan

The Chemistry of Water

  • Chemical and Physical Properties
  • Sampling
  • Quantitative Analysis
  • Procedures
  • Expression of Results
  • Water Patterns
  • Reports
  • Analysis Techniques
  • Suspended SolidsPartical Size Analysis
  • Turbidity
  • Field Analysis

Water Formed Scales

  • Why Scales Form
  • Common Scales
  • Predicting Scale Formation
  • Water Compatibility
  • Scale Prevention
  • Alteration of Water Properties
  • Scale Control Chemicals
  • Scale Removal Methods
  • Scale Analysis
  • Scale Removal Chemicals
  • Removal from Surface Lines
  • Downhole Cleanout

Corrosion in Water Injection and Disposal System

  • Theory
  • Effect of  Metal Composition
  • Effect of Water Composition
  • Physical Variables
  • Form of Corrosion
  • Corrosion Control Methods
  • Approaches
  • Inhibitors
  • Coatings and Linings
  • Cathodic Protection
  • NonmetalicTubular Goods
  • Removal of Corrosion Gases
  • Oxygen Exclusion
  • Design Consideration
  •  Corrosion Monitoring Techniques

Water Treatment Microbiology

  • Terminology
  • Bacteria Which Causes Problems
  • Culturing, Indentifying and Counting Bacteria
  • Miscellaneous Organism
  • Chlorination

Waterflood Injection System

  • Water Source Selection
  • Type of  Treating Systems
  • Water Treating Equipment
  • Suspended Solids Removal
  • Suspended Oil Removal
  • Guidelines to System Design
  • Waterflood Inspection and System Analysis

Water Disposal System

  • Pollution – Incentive for Subsurface Disposal
  • Brines and Gas Processing Plant Waters
  • Plant Water Disposal

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Scale In Oil Field Water 2024:

  • 27-29 Mei 2024 Bali
  • 24-26 Juni 2024 Surabaya
  • 22-24 Juli 2024 Bogor
  • 26-28 Agustus 2024 Bali
  • 23-25 September 2024 Jakarta
  • 21-23 Oktober 2024 Yogyakarta
  • 25-27 November 2024 Bandung

Investasi tahun 2018 (Tidak Termasuk Akomodasi & Penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

REFERENSI

  • PT. Chevron Pacific Indonesia
  • Chevron Indonesia Company

TESTIMONIAL

  • “Materi training bagus, trainernya mantap dan metode penyajiannya sangat bervariasi antara video dengan slide show sehingga kami lebih mudah untuk memahaminya dan permasalahan yang kami hadapi bisa terselesaikan” Dirgahayu Yonisoslita – Lab Analyst PT. Chevron Pacific Indonesia.
  • “Memberi wawasan yang lebih luas mengenai scale dan keterkaitannya dengan proses produksi, sehingga sangat membantu untuk memahami sample scale yang di analisa di laboratorium” Tyas Kuswardani – Specialist TS Laboratory Minas PT. Chevron Pacific Indonesia.
  • “Materi training & topik yang disampaikan sangat baik, berhubungan dengan pekerjaan sehari-hari. materi yang disampaikan oleh instruktur sangat mendukung pada problem solving di pekerjaan.” Mohammad Anom Guritno – Lab Analyst Chevron Indonesia Company.

Scale in Oil Field Water-BMD

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Surface Subsurface Oil and Gas Equipments and Facilities

LATAR BELAKANG :

Setelah menyelesaikan training ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar penggunaan peralatan sumur produksi di atas maupun di bawah permukaan, untuk lapangan-lapangan minyak dan gas bumi .
  • Melakukan diagnosis sederhana dalam menagani problema produksi di lapangan yang disebabkan oleh reservoir atau fasilitas produksinya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk gas lift, ESP, Hydraulic/Jet Pump, Sucker Rod Pump dan PCP.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perancangan dan perancangan ulang separator, gas scrubber, gas dehydrator dan peralatan produksi lainnya.

PESERTA YANG DIREKOMENDASIKAN :

Latar belakang  : Operator/ Sr. Operator/ Jr. Engineer/Non Engineer

MATERI TRAINING :

  Reservoir Background

  • Exploration
  • Exploitation
  • Reserve Calculation

Basic Production Engineering

  • Inflow Performance Relationship
  • Productivity Index
  • Multiphase Flow

Well Completion System

  • Open Hole Completion
  • Single Completion
  • Commingle Completion
  • Multiple Completion

Downhole Equipments

  • Tubular Device
  • Packer System
  • Circulating Device
  • Nipples
  • – Joints

Artificial Lift Method Equipments and Design

  • Gas Lift
  • Submersible Pump
  • Sucker Rod Pump
  • Hydraulic Pump

Surface Handling Facilities

  • Well Equipments
  • Pigging System
  • Separator
  • Gas Scrubber
  • Gas Dehydarator

Gas Processing Facilities

  • Gas Sweetening
  • Heat Exchanger
  • Fractination, Liquification, Refrigeration System

Compressor, Pump, Gas and Oil Piping System

  • Compressor
  • Pumps : Centrifugal, Reciprocating, Diaphragm
  • Gas and Oil Piping System

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul pelatihan,Training kit, Lunch, Coffe break, Pelatihan dilaksanakan di hotel berbintang

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Surface Subsurface Oil and Gas Equipments and Facilities 2024:

  • 29-31 Mei 2024 Bandung
  • 26-28 Juni 2024 Yogyakarta
  • 24-26 Juli 2024 Jakarta
  • 28-30 Agustus 2024 Bali
  • 25-27 September 2024 Bogor
  • 23-25 Oktober 2024 Surabaya
  • 27-29 November 2024 Bandung

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Pump : ESP, Hydraulic and Sucker Rod

Training Pump : ESP, Hydraulic and Sucker Rod

 TARGET DAN TUJUAN :Setelah menyelesaikan training ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan reservoir minyak bumi yang berhubungan dengan penggunaan electric submersible, sucker-rod, hydraulic dan jet pump (SRP, ESP, Hydraulic and Jet Pump)..
  • Melakukan diagnosis sederhana dan mengerti pengelolaan data sumuran minyak yang diproduksi dengan electric submersible,  sucker rod pumping, hydraulic dan jet pump.
  • Membuat analisis sederhana terhadap data sumuran minyak, melakukan perhitungan-perhitungan kinerja sumuran sebagai hasil dari pemompaan dengan berbagai metoda sesuai dengan keadaan reservoirnya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dan melakukan optimisasi produksi untuk sumuran minyak yang diproduksi dengan electric submersible, sucker rod pumping, hydraulic dan jet pump sesuai dengan batasan operasinya.

PESERTA YANG DIREKOMENDASIKAN: Latar belakang  : Operator/Sr. Operator/ Jr.Engineer/Engineer MATERI TRAINING : SISTEM PRODUKSI LAPANGAN MINYAK BUMI

  • Sistem Produksi Alamiah
  • Sistem Produksi Dengan Pengangkatan Buatan

ELECTRIC SUBMERSIBLE PUMP

  • Pendahuluan
  • Dasar-dasar perhitungan ESP
  • Konstruksi ESP
  • Karakteristik pompa SRP
  • Cara Memilih jenis pompa
  • Aplikasi di Lapangan

POMPA HIDRAULIK

  • Alat-alat permukaan
  • Jenis-jenis unit pompa
  • Jenis-jenis unit pompa
  • Ukuran pompa
  • Langkah-langkah pada pemilihan pompa hidraulik

POMPA JET

  • Pendahuluan
  • Persoalan gas
  • Ukuran Nozzle dan throat
  • Langkah-langkah pada perhitungan Jet pump
  • Grafik Kelakuan pompa
  • Menggunakan program mesin hitung
  • Hasil lapangan

SUCKER ROD PUMP

  • Pendahuluan
  • Pump Intake Curve
  • Optimisasi Produksi
  • Rancangan Sucker Rod Pump API RP11L
  • Komponen Alat Utama
  • Faktor-faktor yang mempengaruhi gerakan rod
  • Perencanaan pompa
  • Dynagraph & Dynamometer

PCV (PROGRESSIVE CAVITY PUMP)

  • Pendahuluan
  • Deskripsi Peralatan
  • Elastomer
  • Perancangan

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Pump : ESP, Hydraulic and Sucker Rod tahun 2024:

  • 14-16 Mei 2024 Bogor
  • 11-13 Juni 2024 Yogyakarta
  • 09-11 Juli 2024 Bali
  • 13-15 Agustus 2024 Jakarta
  • 10-12 September 2024 Yogyakarta
  • 08-10 Oktober 2024 Bandung
  • 12-14 November 2024 Bogor
  • 10-12 Desember 2024 Bali

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.000.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 10.500.000,-/peserta (Jakarta)
  • Rp. 10.500.000-/peserta (Bandung)
  • Rp. 11.500.000,-/peserta (Yogyakarta)
  • Rp. 13.000.000,-/peserta (Bali)
  • Rp. 13.750.000,-/peserta (Lombok)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Production Optimization Using Nodal Analysis

TARGET DAN TUJUAN :

Setelah menyelesaikan training  ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan optimisasi dan kontrol produksi sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksannaan optimisasi produksi ini untuk meningkatkan kinerja produksi sumuran dan lapangan.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian optimisasi dan control produksi dengan analisis nodal.
  • Membuat analisis sederhana terhadap data sumuran minyak, gas dan panas bumi , melakukan peramalan kinerja dan merencanakan pengembanganya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dari seluruh data perolehan data tubing, flowline, choke, perforasi, gravel-pack, sub-surface savety valve pada sumuran, merencanakan pengembangannya dengan memperhitungan kemampuan masing-masing sumuran.
  • Mempergunakan pengetahuan optimisasi untuk aplikasi dalam cara pengkatan buatan dengan gas-lift, submersible-pump, sucker rod pump dan hidraulic pump.

PESERTA YANG DIREKOMENDASIKAN :

Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

MATERI TRAINING :

Production System Analysis

  • Nodal System Analysis Model
  • Nodal System Analysis  Application

Reservoir Performance

  • Equations and Inflow Performance Relationship
  • Real-Time Performance of Oil Wells
  • Performnace Prediction of Oil Wells
  • Real-Time Performance of Gas Wells
  • Performnace Prediction of Gas Wells
  • Effect of Water Production

Pressure Drop of Fluid Flow in Pipes

  • General Equations and Concepts
  • Fluid Properties : Density,Compressibility Factor etc.
  • Well-Flow Correlations
  • Pipeline Flow Correlations
  • Chokes and Valves Pressure Drop
  • Effect of Velocity

Total System Analysis

  • Tubing Design
  • Flowline Size
  • Effect of Stimulation
  • Chokes and Valves
  • Effect of Completion

Artificial Lift Method

  • Gas Lift
  • Submersible Pump
  • Succker Rod Pump
  • Hydraulic Pump

Nodal Analysis and Production Optimization

  • Pressure Drop Calculation in Steam Line
  • Pressure Calculation in Injection Wells
  • Pressure Calculation in Production Wells
  • Total Analysis Approach for Production Optimization
  • Production Optimization Application

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Production Optimization Using Nodal Analysis tahun 2024:

  • 20-22 Mei 2024 Bandung
  • 04-06 Juni 2024 Malang
  • 02-04 Juli 2024 Surabaya
  • 06-08 Agustus 2024 Yogyakarta
  • 03-05 September 2024 Surabaya
  • 02-04 Oktober 2024 Bogor
  • 05-07 November 2024 Bali
  • 03-05 Desember 2024 Surabaya

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Butuh bantuan! Klik disini

Kami siap membantu, silahkan berkomunikasi langsung dengan Tim Kami yang sedang online saat ini. Jika jaringan sedang sibuk, mungkin karena sedang melayani pelanggan lain. Untuk respon cepat silahkan kirim email ke: [email protected] untuk pelayanan via Help Desk

Customer Support

Mei Dwi - Head Office

Online

Customer Support

Umu Hanifatul - Head Office

Online

Customer Support

Eva Arlinda - Head Office

Online

Customer Support

Andini Eryani - Head Office

Online

Mei Dwi - Head OfficeCustomer Support

Hi, Ada yang Bisa saya bantu pak/bu? 00.00

Umu Hanifatul - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Eva Arlinda - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Andini Eryani - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00