Training Gas Production Engineering

INTRODUCTION

Training Gas Production Engineering – The formation of natural gas is comprised of methane, a gas (or compound) composed of one carbon atom and four hydrogen atoms. The result of natural processes over millions of years ago, from the remains of plants and animals (diatoms) decayed and covered in a thick layer. The rest of the plants and animals is called organic material is then decomposed. Over time, sand and mud turns into rock, covered the organic material trapped under rocks. Pressure and heat changed most of the organic material into coal, some into oil (petroleum), and some into natural gas – tiny bubbles of gas is odorless.

now gas resource is human choices today as an energy source in the world. therefore developed a range of technologies to produce natural gas that is formed in the bottom of the earth. as a consultant to the natural gas production, BMD Street Consulting intends to run a program Training Gas Production Engineering is expected to provide an understanding and ability to practitioners in the world of oil and gas in order to maximize the technology of production natural gas

OBJECTIVES :

After participate in this training, the participants will be able and capable to :

  • Understand the basic concept of gas reservoir, well pruduction performance, gas well testing and handling processes and operation, and how to operate this technology in field application.
  • Diagnostic of gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of gas handling processes and operation.

AUDIENCE:

No specified  (Operator/ Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Reservoir Aspect of Gas Production Engineering

  • Reservoir Gas
  • Gas Reserves

Optimization Gas Well Performance

  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

The Critical View of Field Gas Processing

  • Sulfur Removal
  • Natural Gas  Flow Measurement

Natural Gas  Transportation

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  •  Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Natural Gas Compression

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

LPG
Optimization-liquid Flow In Pipe
Economic Analysis Of Gas Production
Case Study
Discussion

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Gas Production Engineering year 2024:

  • 27-29 Mei 2024 Bali
  • 24-26 Juni 2024 Surabaya
  • 22-24 Juli 2024 Bogor
  • 26-28 Agustus 2024 Bali
  • 23-25 September 2024 Jakarta
  • 21-23 Oktober 2024 Yogyakarta
  • 25-27 November 2024 Bandung

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • IDR. 11.000.000,-/participant (Jakarta)
  • IDR. 11.000.000-/participant (Bandung)
  • IDR. 12.000.000,-/participant (Yogyakarta)
  • IDR. 14.000.000,-/participant (Bali)
  • IDR. 14.750.000,-/participant (Lombok)
  • US$ 4780/participant (Malaysia)

Available on request for time, place and facilities call us for more information

Training Gas Detection and Flow Measurement

OBJECTIVES :

This course is intended to give a breadth and depth analysis in gas detection problems which are actually and frequently occurred in the field. In this course the way to diagnose and solve the problem will be shown. Beside that how to detect ant determine micelleneous constituents in gas will be presented too.

GOALS :

The participants will be brought to current methods in analyzing gas detection problems that occured in actual fields. Skills in identifying various problems will be build during the course. The modern technique uses a relatively complicated method, but, more accurate and serves much more information needed for gas detection and analysis.

After participate in this course, the participants will be able and capable to :

  • Understand the basic concept of gas handling processes and operation, and how to operate this technology in field application.
  • Diagnostic of gas detection in oil and gas field under actual drive mechanism and future performance with current handling processes.
  • Analyze the gas detection under with actual handling system processes using various methods and to plan the better development of gas processing system.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of gas  detection, calculation and operation.

AUDIENCE:

No specified  (Operator/ Sr. Operator/Engineer or Non Engineer) 

COURSE OUT-LINE:

Introduction to Gas Process and Operation

Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Detection and Sampling

  • Size and Type of Sampling
  • Standard Conditions for Sampling
  • Sample Lines and Connections
  • Confining Fluids
  • Metering Samples
  • Collection of Samples

Volumetric Analysis of Gas by Chemical Methods

  • Theory of Gas Analysis
  • Analytical Apparatus
  • Accuracy and Precision
  • Absorbent  Solutions for Gaseous Components
  • Combustion Methods for Gaseous Components
  • Analytical Procedures

Low Temperature Fractional Distillation Analysis

  • Introduction
  • Fractional Apparatus
  • Application of Fractional Apparatus

Other Analytical Methods

  • Mass Spectrometer
  • Infra Red Analyser
  • Gas Chromatograph

Detection and Determination of Micellaneous Constituents

  • Hydrogen Sulfide
  • Organic and Total Sulfur
  • Water Vapor
  • Nitrogen Compounds

Detection  and Determination of CarbonMonoxide in Minute Concentrations

  • Maximim Allowance Concentration of CarbonMonoxide in Air Breathed
  • Micellaneous for Trace Detention and Determination

Detection and Determination of Suspended Particles

  • Sampling
  • Dust Detection and Determination
  • Tar Detection and Determination

Gas Calorimetry

  • Water-Flow Calorimetry
  • Cutler-Hammer Recording Calorimetry
  • Other Recording Calorimeter

Gas Density and Specific Gravity

  • Density
  • Specific Gravity

Gas Pressure Meaurements

  • Pitot Tubes
  • Liquid Column Manometers
  • Multiplying Gages
  • Micromanometers
  • Gages for Locating Liquid Surface
  • Mechanical Pressure Gages
  • Gage Calibration
  • Vacuum or Low Absolute Pressure Gages
  • Laboratory Determination of Gas Appliance Pressure Drop

Gas Temperature Measurements

  • Flue Gas Temperature Measurements
  • Liquid-in-Glass Thermometers
  • Liquid-Expansion Thermometers
  • Liquid Pressure Thermometers
  • Gas-and Vapor-Prewssure Thermometers
  • Bimetallic Thermometers
  • Thermocouples
  • Resitance Thermometers
  • Radiation Pyrometers
  • Optical Pyrometers
  • Electrical Temperature Measuring Instruments
  • Pyrometric Cones, Crayons, Pellets, Lacquer
  • Calibration of Temperature Instruments
  • SurfaceTemperatrure
  • BTU Meters

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Gas Detection and Flow Measurement year 2024 :

  • 20-22 Mei 2024 Medan
  • 05-07 Juni 2024 Jakarta
  • 03-05 Juli 2024 Bali
  • 07-09 Agustus 2024 Bogor
  • 04-06 September 2024 Surabaya
  • 02-04 Oktober 2024 Bandung
  • 06-08 November 2024 Yogyakarta
  • 04-06 Desember 2024 Jakarta

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

Training Downhole Production Modern Well Testing and Pressure Analysis

PENGANTAR

Training Downhole Production Modern Well Testing and Pressure Analysis – Dalam industri minyak dan gas berbagai kompetensi perlu dikuasai salah satunya adalah cara dalam melakukan tes sumur minyak. Dimana banyak study yang harus dilakukan untuk membuat sekaligus mensimulasikan desai tes suatu sumur minyak maupun dengan menggunakan program sederhana. Oleh karena itu mengingat pentingnya Training Downhole Production Modern Well Testing and Pressure Analysis Testing ini sangat dianjurkan diikuti bagi praktisi dalam industri minyak dan gas.

MANFAAT

Banyak manfaat yang akan didapat apabila mengikuti Training Downhole Production Modern Well Testing and Pressure Analysis ini diantaranya setelah menyelesaikan training ini diharapkan peserta dapat :

  • Memahami prinsip dasar operasi dan interpretasi tes sumur minyak
  • Melakukan interpretasi data tes sumur minyak
  • Membuat perencanaan atau desain sustu tes sumur minyak
  • Membuat atau menggunakan program-program kecil yang membantu dalam interpretasi data tes sumur minyak

PESERTA :

Operatori industri minyak dan gas, engineer non engineering perusahaan minyak dan gas, divisi utilitas dan maintenace, divisi pelatihan dan pengembangan SDM dan semua pihak yang terlibat secara langsung ataupun tidak dalam operasi tes sumur

PRE-REQUISITE

  • Mempunyai pengetahuan dasar teknik perminyakan
  • Mempunyai pengetahuan dasar teknik reservoir dan produksi

MATERI TRAINING : Pengenalan Teknik Perminyakan Dasar-Dasar Tes Sumur

  • Prinsip Dasar Tes Sumur
  • Aliran Fluida Dalam Media Berpori
  • Macam-Macam Tes Sumur

Pressure Drawdown Test

  • Analisis Pressure Drawdown Pada Periode Transien
  • Analisis Pressure Drawdown Pada Periode Transien Lanjut
  • Pressure Buildup Test
  • Prinsip Superposisi
  • Pressure Buildup Ideal
  • Actual Buildup Case
  • Lamanya Pengaruh Wellbore Storage
  • Penentuan Tekanan Rata-Rata
  • Pressure Buildup Untuk Sistem Lebih Dari Satu Fasa
  • Analisis Pressure Buildup Dibawah Pengaruh Redistribusi Fasa Pada Lubang Bor

Multi Rate Test

  • Persamaan Dasar Untuk Multiple Rate Test
  • Two Rate Flow Test
  • Deliverability Test
  • Variable Injection Rate Test

Multiple Well Test

  • Interference Test
  • Interference Test Pada Reservoir Terbatas (Bounded)
  • Pulse Testing
  • Analisis Pulse Test Dengan Metode Stegemeier

Analisis Tes Sumur Dengan Menggunakan Type Curve

  • Prinsip Analisis Type Curve
  • Ramey’s Type Curve dan McKinley Type Curve

Tes Sumur Sumur Gas

  • Sifat-Sifat Gas
  •  Analisis Tes Sumur Pada Sumur Gas

Injection Well Testing

  • Injectivity Analysis
  • Falloff Test Analysis
  • Step-Rate Testing

Drill Stem Testing

  • Analisis DST

Tes Sumur Untuk Reservoir Rekah Buatan

  • Transien Tekanan Pada Hydraulically Vertical Fractured Reservoir
  • Efek Skin, Wellbore Storage dan Geometri Rekahan Terhadap Respon Tekanan
  • Finite Fracture Conductivity
  • Massive Hydraulic Fracturing dan Pengujian Pada Tekanan Konstan

Tes Sumur Untuk Reservoir Rekah Alami

  • Kelakuan Transien Tekanan Pada Reservoir Rekah Alami
  • Efek Incomplete Test
  • Pendekatan Gradient Flow Model
  • Analisis Transien Tekanan Pada Reservoir Rekah Alami Dibawah Pengaruh Alirab Spherical

Interpretasi Data Tes Sumur Horizontal

  • Analisis Transien Tekanan Sumur Horizontal Secara Grafis
  •  Analisis Transien Tekanan Sumur Horizontal Dengan Type Curve Matching

Well Sounder

  •  Analisis Data Well Sounder

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft copy dan Hard Copy), Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di hotel berbintang

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Downhole Production Modern Well Testing and Pressure Analysis Tahun 2024 :

  • 14-16 Mei 2024 Bogor
  • 11-13 Juni 2024 Yogyakarta
  • 09-11 Juli 2024 Bali
  • 13-15 Agustus 2024 Jakarta
  • 10-12 September 2024 Yogyakarta
  • 08-10 Oktober 2024 Bandung
  • 12-14 November 2024 Bogor
  • 10-12 Desember 2024 Bali

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Online Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Basic Reservoir Engineering

Course Objectives :

  • Understand the basic concepts of reservoir engineering
  • Understand the basic calculations of the reserve and recovery of an oil or gas reservoir
  • Understand the techniques and procedures of sand control, acidizing, and hydraulic fracturing to increase recovery from a reservoir
  • Understand the basics of oil and gas flow behavior in reservoir
  • Knowledge of Enhanced Oil Recovery purpose and techniques

Who Should Attend

Reservoir Engineer, Geologists, Project Engineers, Production Supervisors and Engineers, Well Service Supervisors and Engineer, Workover Supervisors and Engineers, etc.

Course Contents :

Oil & Gas Reservoir

  • Accumulation of Organic Material in Sediment
  • Organic Accumulation Environment
  • Oil & Gas Existence in Reservoir

Reservoir Fluid & Rock Properties

  • Porosity
  • Permeability
  • Reservoir Parameter Measurement
  • Oil Components
  • Oil Phase
  • Phase Behavior

Fluid Distribution in Reservoir

  • Wettability
  • Surface Tension
  • Capillary Pressure
  • Fluid Distribution

Reservoir Driving Mechanism

  • Water drive
  • Depletion drive
  • Gas cap drive
  • Combination

Reserve Estimation & Recovery Factor

  • Estimation of oil-gas in place
  • Estimation of reserve
  • Estimation of recovery factor

Reserve Estimation & Decline Curve

  • Volumetric Method
  • Material Balance Method
  • Saturated Reservoir
  • Undersaturated Reservoir
  • Gas Reservoir
  • Decline Curve

Basic of Fluid Flow

  • Darcy Law
  • Fluid Viscosity
  • Fluid Compressibility
  • Reservoir Fluid Flow
  • Poiseuilles Capillary Law
  • Productivity Index
  • Zonal damage and well stimulation

Formation Evaluation

  • Purpose of Formation Evaluation
  • Formation Evaluation Method
  • Logging Equipment
  • Log Analysis

Well Testing

  • Pressure Build Up testing
  • Pressure Draw Down testing
  • Production Testing

Acidizing

  • Basic Acidizing
  • Acidizing Types
  • Acidizing Considerations
  • Acid in Stimulation
  •  Acidizing Design

Hydraulic Fracturing

  • Damage around Wellbore
  • Fracturing Considerations
  • Rock Properties & Measurement
  • Fracture Geometry
  • Fracturing Operation Design
  • Case Problem

Enhanced Oil Recovery (EOR)

  • Water flooding
  • Thermal
  • Chemical
  • Miscible flooding

Field Management

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

081382807230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Basic Reservoir Engineering year 2024 :

  • 27-29 Mei 2024 Bali
  • 24-26 Juni 2024 Surabaya
  • 22-24 Juli 2024 Bogor
  • 26-28 Agustus 2024 Bali
  • 23-25 September 2024 Jakarta
  • 21-23 Oktober 2024 Yogyakarta
  • 25-27 November 2024 Bandung

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp.5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

 

Training Quantitative Log Analysis and Petrophysics

LATAR BELAKANG

Setelah menyelesaikan Training Quantitative Log Analysis and Petrophysics ini diharapkan peserta dapat :

  • Memahami prinsip dasar dan teknologi mutahir tentang logging batuan termasuk cased hole logging.
  • Melakukan diagnosis sifat-sifat sumuran dan evaluasi reservoir dengan interpretasi hasil logging conventional maupun cased holed logging.
  • Membuat analisis dan dapat menentukan kemampuan produksi sumuran dari interpretasi data logging
  • Memengerti prinsip-prinsip modern untuk perhitungan wellsite computed log

PESERTA

Operator/Sr. Operator/Engineer/Non-Engineer/Jr. Geologist

PRE-REQUISITE :

  • Mempunyai pengetahuan dasar geologi hidrokarbon
  • Mempunyai pengetahuan dasar evaluasi formasi dan reservoir hidrokarbon

MATERI TRAINING :Pengertian Tentang Lingkungan Logging Konvensional

  • Geometri Sumuran Hidrokarbon
  • Pelaksanaan Logging
  • Gangguan-gangguan yang terjadi

Evaluasi Hidrokarbon

  • Dasar-dasar interpretasi
  • Pengaruh Invasi Lumpur

Zona Permeabel

  • SP Log
  • Gamma ray Log
  • Electromagnetic Log

Log untuk Clean Formation

  • Resistivity-Porosity Crossplot
  • Identifikasi Multimineral

Log untuk Shaly Formation

  • Distribusi Shale dan Clay
  • Cation Excvhage Capacity
  • Model Interpretasi Shaly sand
  • Metoda Dual Water

Penentuan Produktivitas Sumuran

  • Permeabilitas dan Penentuannya
  • Saturasi Air Irreducible
  • Multiple Formation Tester

Wellsite Computed Logs

  • Log Rwa
  • Porosity Overlay
  • Resitivity Overlay
  • SP Overlay
  • Cyberlook Log
  • Analisis Prolog

Electromagnetic Propagation Log

  • EPT Log
  • ADEPT : The Adaptable Tool
  • Interpretation Method
  • CRIM Method
  • CTA Method
  • Tpo Method
  • Endfire Array
  • Brodside Array
  • Deep Propagation Tool (DPT)

Formation Evaluation in Cased Hole

  • Logs for Cased Hole Formation Evaluation
  • Natural Gamma Ray Log
  • Neutron Log
  • Sonic Log
  • Thermal Decay Time Log  (TDT)
  • Gamma Ray Spectromerty Tool (GST)
  • Cement Evaluation
  • CBL/VDL Measurement
  • Compesated Cement Bond Tool
  • Cement Evaluation Tool

INVESTASI (TIDAK TERMASUK BIAYA AKOMODASI & PENGINAPAN): 

  • Rp. 10.500.000,-/peserta (Jakarta)
  • Rp. 10.500.000-/peserta (Bandung)
  • Rp. 11.500.000,-/peserta (Yogyakarta)
  • Rp. 13.000.000,-/peserta (Bali)
  • Rp. 13.750.000,-/peserta (Lombok)

DURASI

3 Hari

FASILITAS

Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

INFORMASI & PROMO

Hub : 021 – 756 3091

Fax : 021 756 3291

CONTACT PERSON

0852  1000 5065, 0813 8280 7230

JADWAL TRAINING QUANTITATIVE LOG ANALYSIS AND PETROPHYSICS TAHUN 2024 :

  • 06-08 Mei 2024 Bogor
  • 03-05 Juni 2024 Bali
  • 01-03 Juli 2024 Jakarta
  • 05-07 Agustus 2024 Yogyakarta
  • 02-04 September 2024 Bandung
  • 01-03 Oktober 2024 Surabaya
  • 04-06 November 2024 Bogor
  • 02-04 Desember 2024 Malang

Training Well Optimization Artificial Lift, Gas Lift, Well Optimization, Troubleshooting

TARGET & TUJUAN TRAINING :

Setelah menyelesaikan training  ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan reservoir minyak bumi yang berhubungan dengan penggunaan gas-lift, sucker-rod, electric submersible, hydraulic dan jet pump.
  • Melakukan diagnosis sederhana dan memengerti pengelolaan data sumuran minyak yang diproduksi dengan, gas lift, sucker rod pumping, electric submersible, hydraulic dan jet pump.
  • Membuat analisis sederhana terhadap data sumuran minyak, melakukan perhitungan-perhitungan kinerja sumuran sebagai hasil dari pemompaan dengan berbagai metoda sesuai dengan keadaan reservoirnya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dan melakukan optimisasi produksi untuk sumuran minyak yang diproduksi dengan gas lift, sucker rod pumping, electric submersible, hydraulic dan jet pump sesuai dengan batasan operasinya.

PESERTA YANG DIREKOMENDASIKAN :

Latar belakang  : Operator/Sr. Operator/ Jr.Engineer/Engineer

MATERI TRAINING :

SISTEM PRODUKSI LAPANGAN MINYAK BUMI

  • Sistem Produksi Alamiah
  • Sistem Produksi Dengan Pengangkatan Buatan

GAS LIFT (GL)

  • Pendahuluan
  • Gas Lift Continu dan Intermittent
  • Komponen Alat Utama Gas Lift
  • IPR dan Perancangan Gas Lift
  • Optimisasii dan Alokasi Gas untuk Gaslift
  • Sistem Produksi Dengan Pengangkatan Buatan oleh Gas Lift
  • Gas Lift Trouble shooting

SUCKER ROD PUMP (SRP)

  • Pendahuluan
  • Pump Intake Curve
  • Optimisasi Produksi
  • Rancangan Sucker Rod Pump API RP11L
  • Komponen Alat Utama
  • Faktor-faktor yang mempengaruhi gerakan rod
  • Perencanaan pompa
  • Dynagraph & Dynamometer
  • SRP Trouble shooting

PROGRESSIVE CAVITY PUMP (PCP)

  • Pendahuluan
  • Deskripsi Peralatan
  • Elastomer
  • Perancangan
  • PCP Trouble shooting

ELECTRIC SUBMERSIBLE PUMP (ESP)

  • Pendahuluan
  • Dasar-dasar perhitungan ESP
  • Konstruksi ESP
  • Karakteristik pompa SRP
  • Cara Memilih jenis pompa
  • Aplikasi di Lapangan
  • ESP Trouble shooting

POMPA HIDRAULIK

  • Alat-alat permukaan
  • Jenis-jenis unit pompa
  • Jenis-jenis unit pompa
  • Ukuran pompa
  • Langkah-langkah pada pemilihan pompa hidraulik
  • Hydraulic Pumps Trouble shooting

POMPA JET

  • Pendahuluan
  • Persoalan gas
  • Ukuran Nozzle dan throat
  • Langkah-langkah pada perhitungan Jet pump
  • Grafik Kelakuan pompa
  • Menggunakan program mesin hitung
  • Hasil lapangan
  • Jet Pump Trouble shooting

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230,  0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Well Optimization Artificial Lift, Gas Lift, Well Optimization, Troubleshooting tahun 2024:

  • 29-31 Mei 2024 Bandung
  • 26-28 Juni 2024 Yogyakarta
  • 24-26 Juli 2024 Jakarta
  • 28-30 Agustus 2024 Bali
  • 25-27 September 2024 Bogor
  • 23-25 Oktober 2024 Surabaya
  • 27-29 November 2024 Bandung

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Nodal Analysis and Production Optimization

TARGET DAN TUJUAN :

Setelah menyelesaikan training  ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan optimisasi produksi sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksannaan optimisasi produksi ini untuk meningkatkan kinerja produksi sumuran dan lapangan.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian optimisasi produksi dengan analisis nodal.
  • Membuat analisis sederhana terhadap data sumuran minyak, gas dan panas bumi , melakukan peramalan kinerja dan merencanakan pengembanganya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dari seluruh data perolehan data tubing, flowline, choke, perforasi, gravel-pack, sub-surface savety valve pada sumuran, merencanakan pengembangannya dengan memperhitungan kemampuan masing-masing sumuran.
  • Mempergunakan pengetahuan optimisasi untuk aplikasi dalam cara pengkatan buatan dengan gas-lift, submersible-pump, sucker rod pump dan hidraulic pump.

PESERTA YANG DIREKOMENDASIKAN :

Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

MATERI TRAINING :

Production System Analysis

  • Nodal System Analysis Model
  • Nodal System Analysis  Application

Reservoir Performance

  • Equations and Inflow Performance Relationship
  • Real-Time Performance of Oil Wells
  • Performnace Prediction of Oil Wells
  • Real-Time Performance of Gas Wells
  • Performnace Prediction of Gas Wells
  • Effect of Water Production

Pressure Drop of Fluid Flow in Pipes

  • General Equations and Concepts
  • Fluid Properties : Density,Compressibility Factor etc.
  • Well-Flow Correlations
  • Pipeline Flow Correlations
  • Chokes and Valves Pressure Drop
  • Effect of Velocity

Total System Analysis

  • Tubing Design
  • Flowline Size
  • Effect of Stimulation
  • Chokes and Valves
  • Effect of Completion

Artificial Lift Method

  • Gas Lift
  • Submersible Pump
  • Succker Rod Pump
  • Hydraulic Pump

Nodal Analysis in Specific Field Application

  • Pressure Drop Calculation in Steam Line
  • Pressure Calculation in Injection Wells
  • Pressure Calculation in Production Wells
  • Total Analysis Approach

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Normal Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Nodal Analysis and Production Optimization tahun 2024:

  • 13-15 Mei 2024 Bogor
  • 10-12 Juni 2024 Bali
  • 08-10 Juli 2024 Jakarta
  • 12-14 Agustus 2024 Yogyakarta
  • 09-11 September 2024 Bandung
  • 07-09 Oktober 2024 Surabaya
  • 11-13 November 2024 Bogor
  • 09-11 Desember 2024 Malang

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Pump and Turbine Selection,Design and Operation for Oil and Gas Production Facilities

OBJECTIVES :

After participate in this training, the participants will be able and capable to :

  • Understand the basic concept of oil and gas handling with surface processes and operation facilities , and how to operate pump and turbine technology in field application.
  • Diagnostic of oil and gas flow  performance under actual pumping drive mechanism and future performance with current handling processes.
  • Analyze the production flow potential of oil and gas flow under actual handling facilities system processes and to plan the better development processes according to fluid flow capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects the phenomena of oil and gas handling processes and operation with given surface facilities and pumping using turbine system.

AUDIENCE:

No specified  (Operator/ Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Introduction to Oil and Gas Production Operation

Oil Surface Production Facilities

  • Well Equipments
  • Pigging System
  • Separator
  • Gas Scrubber
  • Gas Dehydarator
  • Pumps : Centrifugal, Reciprocating, Diaphragm

Gas Surface Processing Facilities

  • Gas Sweetening
  • Heat Exchanger
  • Fractination, Liquification, Refrigeration System
  • Compressor

Pump Basic Theory

  • Centrifugal Pump
  • Conservation of Mass
  • Specific Velocity
  • Pump Performance
  • Cavitation

Pump Specification

  • Pump Specification
  • Flow Capacity
  • Fluid Properties
  • Head
  • Net Positive Heads
  • Rotation Determination and Pump Types
  • Viscous Fluid Correction
  • Material Selection
  • Prime Movers Selection

Pump Application

  • Pump Instalation Plan
  • Pump Application Example

Pump Construction

  • Pump Classification by Impeller
  • Pump Classification by Casing
  • Pump Classification by Stage Number
  • Pump Classification by Axis Position

Pump Operation

  • Head Capasity Curve
  • Parallel and Serrial Operation
  • Capasity Regulator
  • Water Hummer
  • Surging
  • Pressure Fluctuation
  • Automatic Operation

Pump Instalation

  • Horizontal Instalation
  • Vertical Instalation
  • Submersible Instalation
  • Pipping System
  • Vibration and Noise Protection

Pump Maintenance

  • First Inspection
  • Operation Condition Obervation
  • Savety Instrument
  • Maintenace Management
  • Overhaul

Pump Trouble Shooting

  • General Trouble Shooting
  • Submersible Pump Trouuble Shooting

Turbine Fundamental Concept

  • Gas turbine thermodynamics
  • Machinery components analysis : Compressor, Combustor, Gas producer turbine and Power turbine, sealing system
  • Gas turbine performance
  • Off design behavior
  • Gas turbine material
  • Gas turbine control (speedtronic) and instrument

Gas Turbine operation and maintenance

  • Gas turbine predictive maintenance and preventive maintenance
  • (Vibration, lube oil analysis) and interval maintenance
  • Gas turbine failure and failure analysis (case study)
  • Life cycle cost (Cost effectives) of gas turbine
  • Selection and Application gas turbine of gas transmission and pumping

DURATION

3 Day

FASILITY

Normal Class

Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Pump and Turbine Selection,Design and Operation for Oil and Gas Production Facilities year 2024:

  • 20-22 Mei 2024 Bogor
  • 03-05 Juni 2024 Bali
  • 01-03 Juli 2024 Jakarta
  • 05-07 Agustus 2024 Yogyakarta
  • 02-04 September 2024 Bandung
  • 01-03 Oktober 2024 Surabaya
  • 04-06 November 2024 Bogor
  • 02-04 Desember 2024 Malang

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 13.750.000,-/peserta (Lombok)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Production Surface Facility Production,Process,Surface Equipment & Its Operation

OBJECTIVES :

After participate in this course, the participants will be able and capable to :

  • Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology and equipment performance maintenance in field application.
  • Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

AUDIENCE:

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Oil Handling and Processing Facilities and Maintenance
Oil Well Surface Production Equipment and Operation

  • Oil Well Equipment
  • Oil Well Production Operation
  • Well Automatic Safety Device

Oil Gathering System. Manifold and Flowline

  • Oil Gathering System
  • Maniflod System
  • Flowline Sizing and Design

Crude Oil and Gas Separation

  • Separator and Principle of Separation
  • Design of Separator
  • Oil Dehydration

Principles of Measurement

  • Introduction to Measurement
  • Crude Oil Measurement
  • Gas Measurement

Well Test

  • Introduction
  • Responsibility for Test
  • Preparation for Test
  • Types of Well Test
  • Equipment and Procedures
  • Accuracy of Fluid Measurement
  • Problem in Testing
  • Type of Test

Gas Handling and Processing Facilities and Maintenance
Introduction to Gas Handling and Facilities
Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservioir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Gas Compression

  •  Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition

Gas Processing

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Production Surface Facility Production,Process,Surface Equipment & Its Operation 2024:

  • 28-30 Mei 2024 Bali
  • 25-27 Juni 2024 Malang
  • 23-25 Juli 2024 Surabaya
  • 27-29 Agustus 2024 Bali
  • 24-26 September 2024 Bandung
  • 22-24 Oktober 2024 Yogyakarta
  • 26-28 November 2024 Bogor
  • 17-19 Desember 2024 Malang

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

REFERENSI :

  1. PT. Conocophillips Indonesia
  2. PT. Armindo Jaya Mandiri

Training Production Surface Facility Production,Process,Surface Equipment & ITS Operation

Training Scale in oil field Water

SASARAN BELAJAR :

Setelah menyelesaikan training ini diharapkan peserta dapat :

  • Memahami dasar-dasar pembentukan scale dan penggunaannya untuk keperluan operasi produksi-injeksi reservoir minyak, gas dan reservoir panas bumi.
  • Memahami cara-cara pengambilan sample air di lapangan dan cara analisis kandungan kimianya pada sumur-sumur produksi minyak, gas dan panas bumi.
  • Memahami prinsip-prinsip dasar penggunaan peralatan untuk  pelaksanaan  pengujian sifat-sifat air di lapangan minyak, gas dan panas bumi.
  • Melakukan diagnosis sederhana dan melakukan penyelesaian persoalan yang berkaitan dengan pembentukan scale oleh air formasi yang turut terproduksi ke permukaan.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk berbagai keperluan industri dan pelaksanaan injeksi air di lapangan dan cara penanganan kandungan mikrobiologisnya.
  • Mempergunakan pengetahuan spesifik untuk keperluan penanganan scale air formasi termasuk  scale clean out, scale squeeze dan acidizing.

PRE-REQUISITE :

Latar belakang  : Operator, Senior Operator, Engineer, Non Engineer

MATERI TRAINING  :

Kimia Air Formasi

Proses pembentukan Scale dan Faktor Penyebabnya

  • Scale Kalsium Karbonat
  • Scale Kalsium Sulfat
  • Scale BariumSulfat
  • Scale Besi
  • Field Analysis

Teknik Analisis Air Formasi

  • Identifiksi Jenis Scale

Penentuan Kecenderungan Pembentukan Scale

  • Kalsium Karbonat
  • Kalsium Sulfat dan Barium Sulfat

Penanggulangan Masalkah Scale

  • Menghilangkan Scale
  • Secara Mekanis
  • Secara Kimiawi
  • Pencegahan Scale
  • Secara Non Kimiawi
  • Secara Kimiawi

Penanggulangan Scale di Lapangan

  • Metoda Scale Clean Out
  • Metoda Scale Squeeze

Teknik Pengasaman

  • Jenis Asam
  • Jenis Aditive
  • Stimulasi Batuan Karbonat
  • Perencanaan Stimulasi Asam
  • Kriteria Keberhasilan

The Chemistry of Water

  • Chemical and Physical Properties
  • Sampling
  • Quantitative Analysis
  • Procedures
  • Expression of Results
  • Water Patterns
  • Reports
  • Analysis Techniques
  • Suspended SolidsPartical Size Analysis
  • Turbidity
  • Field Analysis

Water Formed Scales

  • Why Scales Form
  • Common Scales
  • Predicting Scale Formation
  • Water Compatibility
  • Scale Prevention
  • Alteration of Water Properties
  • Scale Control Chemicals
  • Scale Removal Methods
  • Scale Analysis
  • Scale Removal Chemicals
  • Removal from Surface Lines
  • Downhole Cleanout

Corrosion in Water Injection and Disposal System

  • Theory
  • Effect of  Metal Composition
  • Effect of Water Composition
  • Physical Variables
  • Form of Corrosion
  • Corrosion Control Methods
  • Approaches
  • Inhibitors
  • Coatings and Linings
  • Cathodic Protection
  • NonmetalicTubular Goods
  • Removal of Corrosion Gases
  • Oxygen Exclusion
  • Design Consideration
  •  Corrosion Monitoring Techniques

Water Treatment Microbiology

  • Terminology
  • Bacteria Which Causes Problems
  • Culturing, Indentifying and Counting Bacteria
  • Miscellaneous Organism
  • Chlorination

Waterflood Injection System

  • Water Source Selection
  • Type of  Treating Systems
  • Water Treating Equipment
  • Suspended Solids Removal
  • Suspended Oil Removal
  • Guidelines to System Design
  • Waterflood Inspection and System Analysis

Water Disposal System

  • Pollution – Incentive for Subsurface Disposal
  • Brines and Gas Processing Plant Waters
  • Plant Water Disposal

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Scale In Oil Field Water 2024:

  • 27-29 Mei 2024 Bali
  • 24-26 Juni 2024 Surabaya
  • 22-24 Juli 2024 Bogor
  • 26-28 Agustus 2024 Bali
  • 23-25 September 2024 Jakarta
  • 21-23 Oktober 2024 Yogyakarta
  • 25-27 November 2024 Bandung

Investasi tahun 2018 (Tidak Termasuk Akomodasi & Penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

REFERENSI

  • PT. Chevron Pacific Indonesia
  • Chevron Indonesia Company

TESTIMONIAL

  • “Materi training bagus, trainernya mantap dan metode penyajiannya sangat bervariasi antara video dengan slide show sehingga kami lebih mudah untuk memahaminya dan permasalahan yang kami hadapi bisa terselesaikan” Dirgahayu Yonisoslita – Lab Analyst PT. Chevron Pacific Indonesia.
  • “Memberi wawasan yang lebih luas mengenai scale dan keterkaitannya dengan proses produksi, sehingga sangat membantu untuk memahami sample scale yang di analisa di laboratorium” Tyas Kuswardani – Specialist TS Laboratory Minas PT. Chevron Pacific Indonesia.
  • “Materi training & topik yang disampaikan sangat baik, berhubungan dengan pekerjaan sehari-hari. materi yang disampaikan oleh instruktur sangat mendukung pada problem solving di pekerjaan.” Mohammad Anom Guritno – Lab Analyst Chevron Indonesia Company.

Scale in Oil Field Water-BMD

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Butuh bantuan! Klik disini

Kami siap membantu, silahkan berkomunikasi langsung dengan Tim Kami yang sedang online saat ini. Jika jaringan sedang sibuk, mungkin karena sedang melayani pelanggan lain. Untuk respon cepat silahkan kirim email ke: [email protected] untuk pelayanan via Help Desk

Customer Support

Mei Dwi - Head Office

Online

Customer Support

Umu Hanifatul - Head Office

Online

Customer Support

Eva Arlinda - Head Office

Online

Customer Support

Andini Eryani - Head Office

Online

Mei Dwi - Head OfficeCustomer Support

Hi, Ada yang Bisa saya bantu pak/bu? 00.00

Umu Hanifatul - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Eva Arlinda - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Andini Eryani - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00