Training Basic Reservoir Engineering

Course Objectives :

  • Understand the basic concepts of reservoir engineering
  • Understand the basic calculations of the reserve and recovery of an oil or gas reservoir
  • Understand the techniques and procedures of sand control, acidizing, and hydraulic fracturing to increase recovery from a reservoir
  • Understand the basics of oil and gas flow behavior in reservoir
  • Knowledge of Enhanced Oil Recovery purpose and techniques

Who Should Attend

Reservoir Engineer, Geologists, Project Engineers, Production Supervisors and Engineers, Well Service Supervisors and Engineer, Workover Supervisors and Engineers, etc.

Course Contents :

Oil & Gas Reservoir

  • Accumulation of Organic Material in Sediment
  • Organic Accumulation Environment
  • Oil & Gas Existence in Reservoir

Reservoir Fluid & Rock Properties

  • Porosity
  • Permeability
  • Reservoir Parameter Measurement
  • Oil Components
  • Oil Phase
  • Phase Behavior

Fluid Distribution in Reservoir

  • Wettability
  • Surface Tension
  • Capillary Pressure
  • Fluid Distribution

Reservoir Driving Mechanism

  • Water drive
  • Depletion drive
  • Gas cap drive
  • Combination

Reserve Estimation & Recovery Factor

  • Estimation of oil-gas in place
  • Estimation of reserve
  • Estimation of recovery factor

Reserve Estimation & Decline Curve

  • Volumetric Method
  • Material Balance Method
  • Saturated Reservoir
  • Undersaturated Reservoir
  • Gas Reservoir
  • Decline Curve

Basic of Fluid Flow

  • Darcy Law
  • Fluid Viscosity
  • Fluid Compressibility
  • Reservoir Fluid Flow
  • Poiseuilles Capillary Law
  • Productivity Index
  • Zonal damage and well stimulation

Formation Evaluation

  • Purpose of Formation Evaluation
  • Formation Evaluation Method
  • Logging Equipment
  • Log Analysis

Well Testing

  • Pressure Build Up testing
  • Pressure Draw Down testing
  • Production Testing

Acidizing

  • Basic Acidizing
  • Acidizing Types
  • Acidizing Considerations
  • Acid in Stimulation
  •  Acidizing Design

Hydraulic Fracturing

  • Damage around Wellbore
  • Fracturing Considerations
  • Rock Properties & Measurement
  • Fracture Geometry
  • Fracturing Operation Design
  • Case Problem

Enhanced Oil Recovery (EOR)

  • Water flooding
  • Thermal
  • Chemical
  • Miscible flooding

Field Management

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

081382807230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Basic Reservoir Engineering year 2024 :

  • 22-24 Januari 2024 Jakarta
  • 26-28 Februari 2024 Bogor
  • 25-27 Maret 2024 Yogyakarta
  • 22-24 April 2024 Medan
  • 27-29 Mei 2024 Bali
  • 24-26 Juni 2024 Surabaya
  • 22-24 Juli 2024 Bogor
  • 26-28 Agustus 2024 Bali
  • 23-25 September 2024 Jakarta
  • 21-23 Oktober 2024 Yogyakarta
  • 25-27 November 2024 Bandung

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp.5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

 

Training Advanced Formation Evaluation

MAKSUD DAN TUJUAN TRAINING ADVANCED FORMATION EVALUATION

Setelah menyelesaikan Training Advanced Formation Evaluation ini diharapkan peserta dapat :

  • Memahami prinsip dasar dan teknologi mutahir tentang evaluasi formasi dengan logging batuan termasuk cased hole logging.
  • Melakukan diagnosis sifat-sifat sumuran dan evaluasi reservoir dengan interpretasi hasil evaluasi formasi dengan logging conventional maupun cased holed logging.
  • Membuat analisis dan dapat menentukan kemampuan produksi sumuran dari interpretasi data evaluasi formasi dengan logging
  • Memengerti prinsip-prinsip modern untuk perhitungan wellsite computed log

PESERTA :

Operator/Sr. Operator/Engineer/Non-Engineer/Jr. Geologist

PRE-REQUISITE :

  • Mempunyai pengetahuan dasar geologi hidrokarbon
  • Mempunyai pengetahuan dasar evaluasi formasi dan reservoir hidrokarbon

MATERI TRAINING :

Pengertian Tentang Lingkungan Logging Konvensional

  • Geometri Sumuran Hidrokarbon
  • Pelaksanaan Logging
  • Gangguan-gangguan yang terjadi

Evaluasi Hidrokarbon

  • Dasar-dasar interpretasi
  • Pengaruh Invasi Lumpur

Zona Permeabel

  • SP Log
  • Gamma ray Log
  • Electromagnetic Log 

Log untuk Clean Formation

  • Resistivity-Porosity Crossplot
  • Identifikasi Multimineral

Log untuk Shaly Formation

  • Distribusi Shale dan Clay
  • Cation Excvhage Capacity
  • Model Interpretasi Shaly sand
  • Metoda Dual Water

Penentuan Produktivitas Sumuran

  • Permeabilitas dan Penentuannya
  • Saturasi Air Irreducible
  • Multiple Formation Tester

Wellsite Computed Logs

  • Log Rwa
  • Porosity Overlay
  • Resitivity Overlay
  • SP Overlay
  • Cyberlook Log
  • Analisis Prolog

Electromagnetic Propagation Log

  • EPT Log
  • ADEPT : The Adaptable Tool
  • Interpretation Method
  • CRIM Method
  • CTA Method
  • Tpo Method
  • Endfire Array
  • Brodside Array
  • Deep Propagation Tool (DPT)

Formation Evaluation in Cased Hole

  • Logs for Cased Hole Formation Evaluation
  • Natural Gamma Ray Log
  • Neutron Log
  • Sonic Log
  • Thermal Decay Time Log  (TDT)
  • Gamma Ray Spectromerty Tool (GST)
  • Cement Evaluation
  • CBL/VDL Measurement
  • Compesated Cement Bond Tool
  • Cement Evaluation Tool

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

081382807230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

TRAINING ADVANCED FORMATION EVALUATION TAHUN 2024 :

  • 10-12 Januari 2024 Malang
  • 14-16 Februari 2024 Bogor
  • 13-15 Maret 2024 Surabaya
  • 15-17 Mei 2024 Yogyakarta
  • 12-14 Juni 2024 Jakarta
  • 10-12 Juli 2024 Bali
  • 14-16 Agustus 2024 Bogor
  • 11-13 September 2024 Surabaya
  • 09-11 Oktober 2024 Bandung
  • 13-15 November 2024 Yogyakarta
  • 11-13 Desember 2024 Jakarta

INVESTASI (TIDAK TERMASUK BIAYA AKOMODASI & PENGINAPAN) : 

Online Class

  • Rp.5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Advanced Well Testing

Training Advanced Well Testing

Introduction

As Oil and Gas Training Center in Indonesia, BMD Street Consulting intends to conduct advanced training well testing, which is very useful in provide Necessary knowledge in well with problem diagnosis and remedial work-over operations, well stimulation, sand control and water that helps formulate engineering solution of petroleum production field operation related problems. 

Course Objectives

  • Understand why and how formations can be damaged and how to reduce the risk of damage, and increase the well productivity
  • Know the principles underlying well testing and the procedures for analysing well tests in both vertical and horizontal wells
  • Learn the reasons for well testing and the information that can be derived from it
  • Understand the state-of-the-art of well testing, including testing of horizontal wells, layered reservoirs, and reservoirs producing under multiphase flow conditions
  • Design well tests and specify equipment requirements and procedures
  • Check the quality of well test data and correct or discard “bad” data
  • Analyse well tests for production and injection wells using classical and computer aided methods
  • Identify well bore and reservoir effects and choose the correct model for evaluation and design
  • Set actual test objectives and design a test to achieve these objectives
  • Understand the basic types of well tests (drawdown, buildup, injection, falloff, interference, pulse and DST)
  • Understand basic concepts (Horner plots, Log-Log plots, skin effect, well bore storage, and effect of boundaries)
  • Perform actual well test interpretations for homogeneous, fractured, double porosity systems)

Module

  • Introduction to Well Testing
  • Overview of Well Behaviour and Testing
  • Flow Equations Including the Diffusivity and Darcy Equation
  • Types of tests, fluid types, reservoir types, well test interpretation approaches
  • Reservoir Boundaries and Channel Analysis
  • Well bore Skin Factor and Partial Penetration and Deviation, Skin – damage and stimulation
  • Well bore Storage and the Use of Type Curves Pressure Derivative
  • Hydraulically and Naturally Fractured Wells
  • Well Test Interpretations
  • Well Test Design and Planning
  • Horizontal Well Test
  • Interpretation of oil and gas well tests
  • Useful Concepts: radius of investigation, time to stabilization, superposition
  • Drawdown Analysis (or Injection): procedure, specialized analyses, horizontal wells
  • Build up Analysis: Horner plot, equivalent time, average reservoir pressure, detection of boundaries
  • Production Forecasting and Analysis: transient/stabilized IPR, AOF (sand face/wellhead)
  • Test design, complex models, pitfalls, etc.
  • Analysis of Flow Tests
  • Radius of Investigation,
  • Well bore Storage Effects,
  • Drainage Area Pressure, Distance to Boundaries
  • Flow and Build-Up Test Analysis for Natural Gas Wells
  • Multi rate Tests

Intended for
This course is suitable for:

  • Engineers (well completion engineer, production engineers, reservoir engineer and field engineer), and well-site geologist, and other staffs from an operating and/or service and/or consultant and/or engineering company involved in Petroleum Production Operation process;
  • Engineers and technical personnel involving with appraisal or field development project, and/or reservoir management team intending to enhance their technical skills and level of confidence in decision making by identifying well problems issues, causes of production anomalies; various operational constraints etc.
  • Engineers and earth scientists involved in well and formation characterization and reservoir surveillance
  • Reservoir and production engineers, geoscientists and managers involved in well testing for formation evaluation and production optimization

Metod

Presenting theory, interactive discussion and practices the class by taking study case as a material to be solved

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

081382807230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Advanced Well Testing year 2023:

  • 01-03 November 2023 Yogyakarta
  • 06-08 Desember 2023 Jakarta

Schedule Training Advanced Well Testing year 2024:

  • 15-17 Januari 2024 Jakarta
  • 19-21 Februari 2024 Yogyakarta
  • 18-20 Maret 2024 Bandung
  • 15-17 April 2024 Surabaya
  • 20-22 Mei 2024 Bogor
  • 18-20 Juni 2024 Bali
  • 15-17 Juli 2024 Jakarta
  • 19-21 Agustus 2024 Bandung
  • 17-19 September 2024 Yogyakarta
  • 21-23 Oktober 2024 Bandung
  • 18-20 November 2024 Surabaya
  • 16-18 Desember 2024 Bogor

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp.5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

COSTUMER :

  • PT. Elnusa Balikpapan

TESTIMONI :

  • “Penjelasan materi yang di sampaikan serta penguasaan materi trainer sangat baik. Sriyono, Chief Opertaor. PT. Elnusa Balikpapan. 
  • Secara keseluruhan baik dan mudah-mudahan bisa berguna dan bekal ilmu untuk masa depan. Junoto Limbong, Chief Operator. PT. Elnusa Balikpapan

Advance Well Test.5-7 Dec 2013 BPNDSCF3400DSC_0110

Butuh bantuan! Klik disini

Kami siap membantu, silahkan berkomunikasi langsung dengan Tim Kami yang sedang online saat ini. Jika jaringan sedang sibuk, mungkin karena sedang melayani pelanggan lain. Untuk respon cepat silahkan kirim email ke: [email protected] untuk pelayanan via Help Desk

Customer Support

Mei Dwi - Head Office

Online

Customer Support

Umu Hanifatul - Head Office

Online

Customer Support

Eva Arlinda - Head Office

Online

Customer Support

Andini Eryani - Head Office

Online

Mei Dwi - Head OfficeCustomer Support

Hi, Ada yang Bisa saya bantu pak/bu? 00.00

Umu Hanifatul - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Eva Arlinda - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Andini Eryani - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00