Training Gas Production Engineering

INTRODUCTION

Training Gas Production Engineering – The formation of natural gas is comprised of methane, a gas (or compound) composed of one carbon atom and four hydrogen atoms. The result of natural processes over millions of years ago, from the remains of plants and animals (diatoms) decayed and covered in a thick layer. The rest of the plants and animals is called organic material is then decomposed. Over time, sand and mud turns into rock, covered the organic material trapped under rocks. Pressure and heat changed most of the organic material into coal, some into oil (petroleum), and some into natural gas – tiny bubbles of gas is odorless.

now gas resource is human choices today as an energy source in the world. therefore developed a range of technologies to produce natural gas that is formed in the bottom of the earth. as a consultant to the natural gas production, BMD Street Consulting intends to run a program Training Gas Production Engineering is expected to provide an understanding and ability to practitioners in the world of oil and gas in order to maximize the technology of production natural gas

OBJECTIVES :

After participate in this training, the participants will be able and capable to :

  • Understand the basic concept of gas reservoir, well pruduction performance, gas well testing and handling processes and operation, and how to operate this technology in field application.
  • Diagnostic of gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of gas handling processes and operation.

AUDIENCE:

No specified  (Operator/ Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Reservoir Aspect of Gas Production Engineering

  • Reservoir Gas
  • Gas Reserves

Optimization Gas Well Performance

  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

The Critical View of Field Gas Processing

  • Sulfur Removal
  • Natural Gas  Flow Measurement

Natural Gas  Transportation

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  •  Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Natural Gas Compression

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

LPG
Optimization-liquid Flow In Pipe
Economic Analysis Of Gas Production
Case Study
Discussion

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641, 0821 3874 5980

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Gas Production Engineering year 2025:

  • 10-12 November 2025 Bogor
  • 08-10 Desember 2025 Malang

Schedule Training Gas Production Engineering year 2026:

  • 12-14 Januari 2026 Jakarta
  • 09-11 Februari 2026 Yogyakarta
  • 09-11 Maret 2026 Bandung
  • 13-15 April 2026 Medan
  • 11-13 Mei 2026 Bogor
  • 08-10 Juni 2026 Bali
  • 06-08 Juli 2026 Jakarta
  • 10-12 Agustus 2026 Yogyakarta
  • 07-09 September 2026 Bandung
  • 12-14 Oktober 2026 Surabaya
  • 09-11 November 2026 Bogor
  • 07-09 Desember 2026 Malang

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • IDR. 12.000.000,-/participant (Jakarta) (Harga belum termasuk pajak dan promo)
  • IDR. 12.000.000-/participant (Bandung) (Harga belum termasuk pajak dan promo)
  • IDR. 13.100.000,-/participant (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • IDR. 15.300.000,-/participant (Bali) (Harga belum termasuk pajak dan promo)
  • IDR. 16.100.000,-/participant (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/participant (Malaysia) (Harga belum termasuk pajak dan promo)

Available on request for time, place and facilities call us for more information

Training Gas Conditioning and Processing Facilities

Training Gas Conditioning and Processing Facilities

LATAR BELAKANG

Training Gas Conditioning and Processing Facilities-Membantu peserta untuk menguasai dan memahami konsep dasar proses operasi dan penanganan gas bumi. Termasuk didalamnya mamahami aplikasi teknologi diaktual lapangan sangat mendukung kesuksesan dalam proses produksi gas bumi. Serta mampu melakukan diagnosa kinerja reservoar gas berdasarkan mekanisme aktual dilapangan serta performa kinerja teknologi yang digunakan dan proses penanganan dalam proses produksi gas bumi. Selain itu juga mampu memahami dasar-dasar aspek microscopic dan macroscopic dalam fenomena proses penanganan gas dan operasi.

OBJECTIVES 

After participate in this Training Gas Conditioning and Processing Facilities, the participants will be able and capable to :

  • Understand the basic concept of gas handling processes and operation, and how to operate this technology in field application.
  • Diagnostic of gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of gas handling processes and operation.

PESERTA YANG DIREKOMENDASIKAN

Tidak ada persyaratan khusus untuk mengikuti Training Gas Conditioning and Processing Facilities ini, karena pelatihan ini sangat penting diikuti oleh seluruh praktisi di sektor minyak dan gas bumi dikarena akan banyak membahas secara mendetail proses produksi gas bumi, dimana akan banyak diberikan pengetahuan dan skill dalam melakukan analisa dilapangan sehingga mampu membuat dan merencanakan pengembangan-pengembangan yang mungkin dilakukan dalam rangka meningkatkan kapasitas produksi gas. Diantara mereka yang harus hadir dalam pelatihan ini yaitu level operator hingga engineer baik yang baru berkecimpung maupun yang sudah menjadi senior disektor MIGAS

METODE PELAKSANAAN

Dalam Training Gas Conditioning and Processing Facilities ini, menggunakan metode interaktif, yaitu pemahaman dari sisi konsep, contoh aplikasi, berlatih menuangkan konsep, diskusi interaktif dan studi kasus sehingga peserta dapat lebih mudah memahami dan menguasai materi yang diajarkan

BAHAN AJAR

Introduction to Gas Process and Operation

Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservoir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Gas Compression

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition

Gas Processing

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

DURASI

3 Day

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft copy dan Hard Copy), Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641, 0821 3874 5980

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training  Gas Conditioning and Processing Facilities tahun 2025:

  • 12-14 November 2025 Bandung
  • 26-28 November 2025 Yogyakarta
  • 10-12 Desember 2025 Jakarta
  • 22-24 Desember 2025 Medan

Jadwal Training  Gas Conditioning and Processing Facilities tahun 2026:

  • 06-08 Januari 2026 Jakarta
  • 20-22 Januari 2026 Bogor
  • 03-05 Februari 2026 Yogyakarta
  • 18-20 Februari 2026 Surabaya
  • 03-05 Maret 2026 Bandung
  • 16-18 Maret 2026 Jakarta
  • 07-09 April 2026 Surabaya
  • 21-23 April 2026 Yogyakarta
  • 05-07 Mei 2026 Bogor
  • 19-21 Mei 2026 Jakarta
  • 02-04 Juni 2026 Jakarta
  • 16-18 Juni 2026 Bali
  • 01-03 Juli 2026 Bogor
  • 14-16 Juli 2026 Yogyakarta
  • 04-06 Agustus 2026 Surabaya
  • 18-20 Agustus 2026 Jakarta
  • 02-04 September 2026 Bandung
  • 15-17 September 2026 Bogor
  • 06-08 Oktober 2026 Surabaya
  • 20-22 Oktober 2026 Yogyakarta
  • 03-05 November 2026 Bogor
  • 17-19 November 2026 Jakarta
  • 02-04 Desember 2026 Yogyakarta
  • 15-17 Desember 2026 Surabaya
REFERENSI :
  1. BW Offshore
  2. PT. Pertamina EP
  3. PT. Nusantara Regas
  4. JOBS PMTS

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • Rp. 12.000.000,-/peserta (Jakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 12.000.000-/peserta (Bandung) (Harga belum termasuk pajak dan promo)
  • Rp. 13.100.000,-/peserta (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 15.300.000,-/peserta (Bali) (Harga belum termasuk pajak dan promo)
  • Rp. 16.100.000,-/peserta (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/peserta (Malaysia) (Harga belum termasuk pajak dan promo)
TESTIMONI :
  • Materi sangat menarik dan sangat menunjang untuk kebutuhan dalam pekerjaan. Yogie Kusuma Ssamanhudi. BW Offshore

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

 

Training Basic Reservoir Engineering

Course Objectives :

  • Understand the basic concepts of reservoir engineering
  • Understand the basic calculations of the reserve and recovery of an oil or gas reservoir
  • Understand the techniques and procedures of sand control, acidizing, and hydraulic fracturing to increase recovery from a reservoir
  • Understand the basics of oil and gas flow behavior in reservoir
  • Knowledge of Enhanced Oil Recovery purpose and techniques

Who Should Attend

Reservoir Engineer, Geologists, Project Engineers, Production Supervisors and Engineers, Well Service Supervisors and Engineer, Workover Supervisors and Engineers, etc.

Course Contents :

Oil & Gas Reservoir

  • Accumulation of Organic Material in Sediment
  • Organic Accumulation Environment
  • Oil & Gas Existence in Reservoir

Reservoir Fluid & Rock Properties

  • Porosity
  • Permeability
  • Reservoir Parameter Measurement
  • Oil Components
  • Oil Phase
  • Phase Behavior

Fluid Distribution in Reservoir

  • Wettability
  • Surface Tension
  • Capillary Pressure
  • Fluid Distribution

Reservoir Driving Mechanism

  • Water drive
  • Depletion drive
  • Gas cap drive
  • Combination

Reserve Estimation & Recovery Factor

  • Estimation of oil-gas in place
  • Estimation of reserve
  • Estimation of recovery factor

Reserve Estimation & Decline Curve

  • Volumetric Method
  • Material Balance Method
  • Saturated Reservoir
  • Undersaturated Reservoir
  • Gas Reservoir
  • Decline Curve

Basic of Fluid Flow

  • Darcy Law
  • Fluid Viscosity
  • Fluid Compressibility
  • Reservoir Fluid Flow
  • Poiseuilles Capillary Law
  • Productivity Index
  • Zonal damage and well stimulation

Formation Evaluation

  • Purpose of Formation Evaluation
  • Formation Evaluation Method
  • Logging Equipment
  • Log Analysis

Well Testing

  • Pressure Build Up testing
  • Pressure Draw Down testing
  • Production Testing

Acidizing

  • Basic Acidizing
  • Acidizing Types
  • Acidizing Considerations
  • Acid in Stimulation
  •  Acidizing Design

Hydraulic Fracturing

  • Damage around Wellbore
  • Fracturing Considerations
  • Rock Properties & Measurement
  • Fracture Geometry
  • Fracturing Operation Design
  • Case Problem

Enhanced Oil Recovery (EOR)

  • Water flooding
  • Thermal
  • Chemical
  • Miscible flooding

Field Management

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

081382807230, 0812 8931 1641, 0821 3874 5980

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Basic Reservoir Engineering year 2025 :

  • 17-19 November 2025 Surabaya
  • 15-17 Desember 2025 Bogor

Schedule Training Basic Reservoir Engineering year 2026 :

  • 05-07 Januari 2026 Jakarta
  • 02-04 Februari 2026 Yogyakarta
  • 02-04 Maret 2026 Bandung
  • 06-08 April 2026 Surabaya
  • 04-06 Mei 2026 Bogor
  • 02-04 Juni 2026 Bali
  • 01-03 Juli 2026 Jakarta
  • 03-05 Agustus 2026 Yogyakarta
  • 01-03 September 2026 Bandung
  • 05-07 Oktober 2026 Surabaya
  • 02-04 November 2026 Bogor
  • 01-03 Desember 2026 Malang

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp.6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • Rp. 12.000.000,-/peserta (Jakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 12.000.000-/peserta (Bandung) (Harga belum termasuk pajak dan promo)
  • Rp. 13.100.000,-/peserta (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 15.300.000,-/peserta (Bali) (Harga belum termasuk pajak dan promo)
  • Rp. 16.100.000,-/peserta (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/peserta (Malaysia) (Harga belum termasuk pajak dan promo)

Available on request for time, place and facilities call us for more information

 

The Course of Valves and Chocke

OBJECTIVES :

After participate in thid course, the participants will be abble and cappable to :

  • Understand the basic concept and utilization of Valves and Chokes in oil and gas handling processes and facilities, and how to operate this technology in field application.
  • Diagnostic of Valves and Chokes Performance in oil and gas reservoir under actual drive mecanism and future performance with current handling processes.
  • Analyze of Valves and Chokes Performance in calculation of production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals many  aspects and phenomena of oil and gas handling processes using valves and chokes.

AUDIENCE:

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

INTRODUCTION

  • Fundamentals
  • Manual Valves
  • Check Valves
  • Pressure Relief Valves
  • Rupture Discs
  • Units of Measurements
  • Identification of Valve Size and Pressure Class
  • Standards

FUNDAMENTALS

  • Fluid Tightness of Valves
  • Sealing Mechanism
  • Valve Seatings
  • Gaskets
  • Valve Stem Seals
  • Flow Through Valves

MANUAL VALVES

  • Functions of Manual Valves
  • Grouping of Valves by Method of Flow Regulation
  • Selection of Valves
  • Globe Valves
  • Piston Valves
  • Parallel Gate Valves
  • Wedge Gate Valves
  • Plug Valves
  • Ball Valves
  • Butterfly Valves
  • Pinch Valves
  • Diaphragm Valves
  • Stainless Steel Valves

CHECK VALVES

  • Function of Check Valves
  • Design of Check Valves
  • Selection of Check Valves

PRESSURE RELIEF VALVES

  • Principal Types of Pressure Relief Valves,
  • Terminology
  • Direct-Loaded Pressure Relief Valves
  • Pilot-Operated Pressure Relief Valves,
  • Rupture Discs
  • Metal Rupture Discs

RUPTURE DISCS

  • Terminology
  • Metal Rupture Discs

SIZING PRESSURE RELIEF DEVICE

  • Sizing of Pressure Relief Valves Gas, Vapor, Steam
  • Sizing Equations for Liquids Flow
  • Sizing of Inlet Piping to Pressure Relief Valves
  • Sizing of Discharge Piping of Pressure Relief Valves

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

081382807230, 0812 8931 1641, 0821 3874 5980

Email: [email protected]

Website: https://bmdstreet.co.id

SCHEDULE TRAINING THE COURSE OF VALVES AND CHOCKE YEAR 2025:

  • 12-14 November 2025 Yogyakarta
  • 10-12 Desember 2025 Jakarta

SCHEDULE TRAINING THE COURSE OF VALVES AND CHOCKE YEAR 2026:

  • 28-30 Januari 2026 Bogor
  • 25-27 Februari 2026 Bali
  • 25-27 Maret 2026 Surabaya
  • 28-30 April 2026 Medan
  • 24-26 Juni 2026 Yogyakarta
  • 22-24 Juli 2026 Jakarta
  • 26-28 Agustus 2026 Bali
  • 23-25 September 2026 Bogor
  • 28-30 Oktober 2026 Surabaya
  • 25-27 November 2026 Bandung
  • 22-24 Desember 2026 Medan

INVESTATION YEAR 2020 (NOT INCLUDE HOTEL ACCOMODATION) : 

Online Class

  • Rp. 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • IDR. 12.000.000,-/participant (Jakarta) (Harga belum termasuk pajak dan promo)
  • IDR. 12.000.000-/participant (Bandung) (Harga belum termasuk pajak dan promo)
  • IDR. 13.100.000,-/participant (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • IDR. 15.300.000,-/participant (Bali) (Harga belum termasuk pajak dan promo)
  • IDR. 16.100.000,-/participant (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/participant (Malaysia) (Harga belum termasuk pajak dan promo)

Available on request for time, place and facilities call us for more information

Training Water Flooding Basic Theory and Operation

OBJECTIVES :

After participate in thid Training Water Flooding Basic Theory and Operation, the participants will be abble and cappable to :

  • Understand the basic concept of waterflooding processes and how to operate this technology in field application.
  • Diagnostic of reservoir performance under actual drive mecanism and future performance under waterflooding processes.
  • Analyze the production potential of reservoir under waterflooding processes and to plan the field development.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of reservoir under waterflooding processes.

PRE-REQUISITE:

Basic Petroleum Engineering or field experience

AUDIENCE:

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Introduction to  Waterflooding

Microscopic Efficiency of Immicsible Displacement

  • Fluid and Rock Interaction
  • Methods of Inferring Fluid Distribution in Porous Media
  • Multiphaseflow in Porous Media
  • Residual Saturation
  • Mobilization of Residual Oil

Macroscopic Displacement Efficiency of a Linear Waterflood

  • Development of Equations
  • Frontal Advanced for Unsteady Displacement
  • Linear Waterflood
  • Numerical Model

Waterflood Displacement in Two Dimensions-Areal

  • Development of Equations
  • Fivespot Pattern
  • Scaled Laboratory Models
  • Prediction of Areal Displacement

Vertical Displacement in Linear and Areal Models

  • Layered Models
  • Gravity Segregation and Crossplot in Linear Reservoir
  • 2D Flow With Thichness-Averaged Properties
  • Scaled Laboratory Models

Waterflooding Design

DURATION

3 Day

FASILITY

Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket, etc, Convenient training facilities in four or five stars hotel

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641, 0821 3874 5980

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Water Flooding Basic Theory and Operation 2025:

  • 03-05 November 2025 Bogor
  • 01-03 Desember 2025 Malang

Jadwal Training Water Flooding Basic Theory and Operation 2026:

  • 20-22 Januari 2026 Bali
  • 18-20 Februari 2026 Bogor
  • 16-18 Maret 2026 Surabaya
  • 21-23 April 2026 Yogyakarta
  • 19-21 Mei 2026 Jakarta
  • 16-18 Juni 2026 Bali
  • 14-16 Juli 2026 Malang
  • 19-21 Agustus 2026 Jakarta
  • 15-17 September 2026 Bandung
  • 20-22 Oktober 2026 Surabaya
  • 17-19 November 2026 Jakarta
  • 15-17 Desember 2026 Yogyakarta

INVESTASI (TIDAK TERMASUK BIAYA AKOMODASI & PENGINAPAN) :

Online Class

  • Rp 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • Rp. 12.000.000,-/peserta (Jakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 12.000.000-/peserta (Bandung) (Harga belum termasuk pajak dan promo)
  • Rp. 13.100.000,-/peserta (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 15.300.000,-/peserta (Bali) (Harga belum termasuk pajak dan promo)
  • Rp. 16.100.000,-/peserta (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/peserta (Malaysia) (Harga belum termasuk pajak dan promo)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Stuck Pipe

LATAR BELAKANG :

  • Merupakan salah satu masalah lubang sumur di operasi pemboran
  • Menyebabkan timbulnya biaya ekstra yang cukup besar
  • Berpotensi menyebabkan hilangnya sebagian drillstring di dalam lubang sumur
  • Menunda waktu produksi sumur (pop)

SASARAN :

  • Mengetahui jam kejadian pipa terjepit.
  • Mengetahui kerugian akibat penundaan POP.
  • Mengetahui usaha pencegahan terjadinya pipa terjepit.
  • Mengetahui cara mengidentifikasi mekanisme pipa terjepit yang terjadi.
  • Mengetahui kronologi terjadinya pipa terjepit.

PESERTA YANG DIREKOMENDASIKAN :

Latar belakang  : Operator/ Sr. Operator/ Jr. Engineer/Non Engineer

MATERI TRAINING  :

TEORI DASAR STUCK PIPE

Pengertian stuck pipe
Mekanisme/jenis-jenis stuck pipe

  • Hole pack off
  • Bridge
  • Differential stuck pipe
  • Wellbore geometry

PENGERTIAN STUCK PIPE

  • Ada Gaya yang Menahan
  • Drillstring Tidak Bisa Ditarik
  • Operasi Pemboran Terhenti

TIGHT HOLE:

  • Ada Gaya yang Menahan
  • Drillstring Agak Sulit Ditarik
  • Operasi Pemboran Tetap jalan
  • Berpotensi menyebabkan Pipa Terjepit

HOLE PACK OFF

  • Pembersihan Lubang yang Tidak Bagus
  • Mengendapnya Partikel Solid (Cutting, Caving, LCM) Di Annulus
  • Tidak Bisa Sirkulasi Lumpur

Terdiri Dari:

  •  Cutting yang Mengendap
  •  Shale yang Tidak Stabil
  •  Formasi yang Tidak Terkonsolidasi
  •  Formasi yang Banyak Mengandung Rekahan
  •  Faktor Semen

CUTTING YANG MENGENDAP

Faktor-faktor yang mempengaruhi pembersihan lubang yaitu:

  • Kecepatan pemboran / Rate of Penetration (ROP)
  • Kestabilan lubang
  • Kecepatan anular
  • Rheologi lumpur
  • Waktu sirkulasi
  • Besarnya sudut / kemiringan sumur

BRIDGE

  • Sirkulasi masih bisa dilakukan
  • Hampir sama dengan Hole Pack Off
  • Contoh: Junk, blok semen, dll

DIFFERENTIAL STUCK PIPE

  • Sebab
  • Syarat
  • Ciri2

WELLBORE GEOMETRY

  • Stiff Assembly
  • Keyseat
  • Micro Dogleg
  • Ledges
  • Mobile Formation
  • Undergauge Hole

KEYSEAT

  • Terjadi akibat dogleg yang terlalu besar
  • Tensi pipa yang tinggi + putaran pipa menggerus ke formasi
  • Dari atas penampangnya terlihat seperti lubang kunci
  • BHA dengan OD lebih besar tersangkut

SHALE YANG TIDAK STABIL

  • Shale yang reaktif
  • Geo-pressured shale
  • Hydro-pressured shale
  • Overburden shale
  • Tectonic stress

UNCONSOLIDATED FORMATION

  • Filter cake tidak ada atau tipis
  • Derajat sementasi antar butir rendah
  • Tekanan hidrostatis tidak mampu menahannya

FRACTURED FORMATION

  • Terjadi pada NFR (limestone)
  • Pecahan formasi jatuh dan menyumbat annulus drillstring

MOBILE FORMATION

  • Formasi mudah bergerak /bersifat plastis (garam, shale)
  • Tekanan overburden menekan formasi
  • BHA terjepit di formasi yang mengecil

STIFF ASSEMBLY

  • Adanya dogleg di dalam lubang sumur
  • OD BHA (stabilizer, dll) mengecil

UNDERGAUGE HOLE

  • Pemboran pada batuan keras dan abrasif
  • Diameter bit mengecil
  • Bit baru dengan diameter lebih besar terjepit

FAKTOR SEMEN

  • Semen belum mengering dengan sempurna
  • Tekanan pompa mempercepat semen mengeras
  • Semen yang tidak stabil di sekitar kaki casing/di area squeeze plug

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Normal Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Stuck Pipe tahun 2025:

  • 19-21 November 2025 Bandung
  • 17-19 Desember 2025 Yogyakarta

Jadwal Training Stuck Pipe tahun 2026:

  • 06-08 Januari 2026 Malang
  • 03-05 Februari 2026 Jakarta
  • 03-05 Maret 2026 Surabaya
  • 07-09 April 2026 Bali
  • 05-07 Mei 2026 Bandung
  • 03-05 Juni 2026 Malang
  • 01-03 Juli 2026 Surabaya
  • 04-06 Agustus 2026 Yogyakarta
  • 02-04 September 2026 Surabaya
  • 06-08 Oktober 2026 Bogor
  • 03-05 November 2026 Bali
  • 02-04 Desember 2026 Surabaya

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • Rp. 12.000.000,-/peserta (Jakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 12.000.000-/peserta (Bandung) (Harga belum termasuk pajak dan promo)
  • Rp. 13.100.000,-/peserta (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 15.300.000,-/peserta (Bali) (Harga belum termasuk pajak dan promo)
  • Rp. 16.100.000,-/peserta (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/peserta (Malaysia) (Harga belum termasuk pajak dan promo)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Principles and Practice of Flow Measurements

OBJECTIVE

Training Principles and Practice of Flow Measurements – This course is intended to give a breadth and depth analysis in oil and gas flow measurement problems which are actually and frequently occurred in the field. In this course the way to diagnose and solve the problem will be shown. Beside that how to detect ant determine micelleneous constituents inoil and gas will be presented too. The participants will be brought to current methods in analyzing oil and gas flow measurement problems that occured in actual fields. Skills in identifying various problems will be build during the course. The modern technique uses a relatively complicated method, but, more accurate and serves much more information needed for oil and gas floe measurement.

After participate in this training, the participants will be able and capable to

  • Understand the basic concept of oil and gas flow measurement , oil and gas handling processes and operation, and how to operate this technology in field application.
  • Analyze the oil and gas flow measurement  under with actual handling system processes using various methods and to plan the better development of oil and gas processing system.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas flow measurement, oil and gas  detection, calculation and operation.

COURSE CONTENS

Introduction to Standard Oil and Gas Measurement Tools.

  • Level
  • Density
  • Temperature

Notion of Static and Dynamic Measurement

  • ASTM Table in Oil Volume Calculation

Land Tank Measurement

  • Calibration Table
  • Oil sampling technique
  • Level, Density and Temperature Measurement.

Land Tank Volume Calculation

  • Liter 150C-Barrel 60oF
  • Oil Stock Calculation
  •  Bill of Loading Calculation
  • After Reciept Calculation
  • Supplay Calculation
  • Working and Discharge Calculation

Oil Losses

  • Kind of losses
  • Cause and sources of losses
  • Losses Calculation
  • Methodology to reduce losses

Flow Measurement and Technology

  • Principle of Oil Flow Measurement
  • Direct Measurement
  • Turbin
  • Elektromagnetic
  • Vortex
  • Ultrasonik
  • Coriolis
  • Thermal Mass
  • Positif Displacement
  • Variabel Area (rotameters)

Indirect Measurement

  • Orifice
  • Flow Nozle
  • Venturi
  • Wedge
  • V-cone
  • Pitot tube / Anubar
  • Target meter

Multiphase Flow Meter

  • MPFM Phylosophy
  • Multiphase Flow
  • MPFM Technology
  • MPFM Design Guidelines

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket, etc, Convenient training facilities in four or five stars hotel.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641, 0821 3874 5980

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Principles and practice of Flow Measurements year 2025:

  • 03-05 November 2025 Bogor
  • 17-19 November 2025 Malang
  • 01-03 Desember 2025 Jakarta
  • 15-17 Desember 2025 Yogyakarta

Schedule Training Principles and practice of Flow Measurements year 2026:

  • 12-14 Januari 2026 Jakarta
  • 09-11 Februari 2026 Yogyakarta
  • 09-11 Maret 2026 Bandung
  • 13-15 April 2026 Medan
  • 11-13 Mei 2026 Bogor
  • 08-10 Juni 2026 Bali
  • 06-08 Juli 2026 Jakarta
  • 10-12 Agustus 2026 Yogyakarta
  • 07-09 September 2026 Bandung
  • 12-14 Oktober 2026 Surabaya
  • 09-11 November 2026 Bogor
  • 07-09 Desember 2026 Malang

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • Rp. 12.000.000,-/peserta (Jakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 12.000.000-/peserta (Bandung) (Harga belum termasuk pajak dan promo)
  • Rp. 13.100.000,-/peserta (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 15.300.000,-/peserta (Bali) (Harga belum termasuk pajak dan promo)
  • Rp. 16.100.000,-/peserta (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/peserta (Malaysia) (Harga belum termasuk pajak dan promo)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

REFERENSI

  1. Chevron Geothermal Salak
  2. Chevron Geothermal Indonesia, Ltd.
  3. PT. Chevron Pacivic Indonesia
  4. Chevron SMO

TESTIMONIAL

  • “Materi training sangat berguna untuk pekerjaan saya dan pemateri sangat menguasai materi. over all training ini sangat baik dan berkesan” Imam Baihaqi Salam-Chevron Geothermal Indonesia, Ltd.

Principle-BMD

Training Pengelolaan lapangan Mature, Tehnik & Strategi Meningkatkan Produksi

LATAR BELAKANG :

Setelah menyelesaikan training ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan dan melakukan optimisasi pada saat operasi produksi sumur-sumur dan reservoir minyak, gas dilaksanakan, pengembangan pelaksannaan optimisasi produksi ini untuk meningkatkan kinerja produksi sumuran dan lapangan mature.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian permasalahan dalam operasi produksi sumur-sumur minyak dan gas bumi lapangan mature dan mencari strategi meningkatkan produksinya.
  • Membuat analisis sederhana terhadap data sumuran minyak, gas dan panas bumi ,melakukan peramalan kinerja dan merencanakan pengembangn operasi produksi lapangan mature.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dari seluruh data perolehan data tubing, flowline, choke, perforasi, gravel-pack, sub-surface savety valve pada sumuran, merencanakan pengembangannya dengan memperhitungan kemampuan masing-masing sumuran pada lapangan mature.
  • Mempergunakan pengetahuan operasi produksi untuk keperluan penyelesaian permasalahan sumur seperti : pada saat penyemenan, penanganan scale, pasir, korosi dan damage yang mungkin terjadi pada sumuran minyak dan gas bumi lapangan mature.
  • Memahami prinsip-prinsip dasar perancangan : penyemenan, workover, stimulasi sumuran dengan  pengasaman dan perekahan hidrololik, perencanaan work over dan lain-lain untuk lapangan mature.

PRE-REQUISITE :

Latar belakang  : Operator, Senior Operator, Engineer/Non Engineer

MATERI TRAINING :

Geologic Considerations in producing Operation

  • Introduction
  • Sandstone Reservoirs
  • Geologic Factors Affecting Reservoir Properties in Sandstone
  • Application of Geologic concepts in Specific Sandstone
  • Carbonate Reservoirs
  • Application of Geologic Concepts in Carbonate Reservoirs

Reservoir Considerations in Well Completions

  • Introduction
  • Hydrocarbon Properties of Oil and Gas
  • Recommendations of Obtaining Good Test Data
  • “Eyeball” Interpretation of Pressure Charts

Well Completion Design

  • Factors Influencing Well Completion Design
  • Conventional Tubular Configuration
  • Unconventional Tubular Configurations
  • Sizing Production Tubular
  • Completion Interval
  • Permanent Well Completions (PWC)
  • Tubingless Completion

Tubing Strings,Packers,Subsurface Control Equipment

  • Tubing Strings
  • Steel Grades
  • Tubing Connections
  • Make  up of API Threaded connection
  • Design of Tubing Strings
  • High Strength Tubing
  • Physical Properties of Steel
  • Sensitivities of High Strength Tubing
  • Tubing Inspection
  • Tubing Handling Practices
  • Equipment for Use With-Strength Tubing
  • Tubing Running Practices
  • API Publication List
  • Packers and Subsurface Control Equipment
  • Production Packers
  • Subsurface Control Equipment

Perforating Oil and Gas Wells

  • Introduction
  • Types of Perforators
  • Evaluation of Perforator Performance
  • Factors  Aftecting Gun Perforating Results
  • Perforating in a Clean Fluid with Differential Pressure Into Wellbore
  • A Comparison between the GEO-VANN System and Other Perforating Methods in Wells Equipped with Packers

Completion and Workover Fluids

  • Functions-Requirements-Selection Criteria
  • Formation Damage Related to Solids
  • Oil Fluids-Practical Application
  • Conventional Water-Base Mud
  • Oil Base or Invert-Emulsion Muds
  • Foam
  • Perforating Fluids
  • Packer Fluids
  • Well Killing

Production Logging

  • Introduction
  • Logging Device
  • Application of Production logging
  • Field Examples of Production Logging Techniques
  • Primary Cement Evaluation

Problem Well Analysis

  • Problem Wells
  • Problem Well Analysis Checklist

Parafin and Asphaltene

  • Introduction
  • Paraffin and Asphaltene Chemistry
  • Deposition Mechanisms
  • Removal of Wax Deposits
  • Preventing or Decreasing Wax Deposition
  • Design of Wax Control

Squeeze Cementing-Remedial Cementing

  • Introduction
  • Theoretical Considerations
  • Practical Considerations
  • Special Squeeze Cementing Situations
  • Planning a Squeeze Cement Job
  • Normal Operational Procedures
  • Other Operational Procedures
  • Plug-Back Operations
  • Special Cement Systems

Sand Control

  • Introduction
  • Reduction of Drag Force
  • Mechanical Methods of Sand Control
  • Practical Considerations in Gravel Packing
  • Use of screen Without Gravel
  • Resin Consolidation Methods

Formation Damage

  • Introduction
  • Basic Causes of Damage
  • Classification of Damage Mechanisms
  • Reduced Absolute Permeability
  • Increased Fluid Viscosity (Emulsion)
  • Diagnosis of Formation Damage

Surfactants for Well Treatments

  • Characteristics of Surfactants
  • Use and Action of Surfactant
  • Formation Damage Susceptible to Surfactant Treatment
  • Preventing or Removing Damage
  • Well Stimulation With Surfactants
  • Increasing Effectiveness of Rod Pumping
  • Prevention of Well Damage

Acidizing

  • Acids Used in Well Stimulation
  • Acid Additives
  • Carbonate Acidizing
  • Acidizing Techniques for Caronat Formations
  • Sandstone Acidizing
  • Potential Safety Hazard in Acidizing

Hydraulic Fracturing

  • Introduction
  • Mechanics of Fracturing
  • Production Increase from Fracturing
  • Propping the Fracture
  • Frac Fluids
  • Frac Job Design
  • Frac Job Evaluation Techniques

Scale Deposition,Removal,and Prevention

  • Introduction
  • Causes of Scale Deposition
  • Prediction and Identification of Scale
  • Scale Removal
  • Scale Prevention

Corrosion Control

  • The Corrosion Process
  • Detection and Measurement of Corrosion
  • Corrosion Control

Workover and Completion Rigs Workover System

  • Conventional Production Rigs
  • Non-Conventional Workovers System
  • Concentric Tubing Workovers

Workover Planning

  • Reasons for Workover
  • Workover to Alleviate Formation Damage
  • Workover for Low Permeability Well
  • Workover of Wells in Partially Pressure-Depleted Reservoirs
  • Workover to Reduces Water Production in Oil and Gas Wells
  • Workover to Reduces Gas Production in Oil Wells
  • Workover for Sand Control
  • Workover to Repair Mechanical Failure
  • Workover to Change Zones or Reservoirs
  • Workover to Multicomplete
  • Workover to Increase Production in Well Producing High Viscosity (Low Gravity) Oil
  • Workover Economics

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641, 0821 3874 5980

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Pengelolaan lapangan Mature, Tehnik & Strategi Meningkatkan Produksi tahun 2025:

  • 26-28 November 2025 Bandung
  • 29-31 Desember 2025 Medan

Jadwal Training Pengelolaan lapangan Mature, Tehnik & Strategi Meningkatkan Produksi tahun 2026:

  • 05-07 Januari 2026 Jakarta
  • 02-04 Februari 2026 Yogyakarta
  • 02-04 Maret 2026 Bandung
  • 06-08 April 2026 Surabaya
  • 04-06 Mei 2026 Bogor
  • 02-04 Juni 2026 Bali
  • 01-03 Juli 2026 Jakarta
  • 03-05 Agustus 2026 Yogyakarta
  • 01-03 September 2026 Bandung
  • 05-07 Oktober 2026 Surabaya
  • 02-04 November 2026 Bogor
  • 01-03 Desember 2026 Malang

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • Rp. 11.450.000,-/peserta (Jakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 11.450.000-/peserta (Bandung) (Harga belum termasuk pajak dan promo)
  • Rp. 12.550.000,-/peserta (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 14.200.000,-/peserta (Bali) (Harga belum termasuk pajak dan promo)
  • Rp. 15.100.000,-/peserta (Lombok) (Harga belum termasuk pajak dan promo)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Well Injection Production and Reservoir Synergetic System For Steam Flood Processes

LATAR BELAKANG :

Setelah menyelesaikan Training Well Injection Production and Reservoir  ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar peningkatan perolehan reservoir minyak bumi dengan mempergunakan metoda EOR dan terutama sekali dengan metoda steam injection, termasuk uraian tentang model geologi dan reservoirnya.
  • Melakukan perhitungan-perhitungan sederhana untuk optimisasi dan penentuan kinerja produksi sumur-sumur minyak bumi yang mengalami steam injection.
  • Mengenal baik peralatan produksi di atas (surface) maupun di bawah (downhole) permukaan untuk pelaksanaan steamflood di lapangan.
  • Membuat analisis sederhana terhadap data sumuran minyak yang mendapat injeksi uap, kemudian meramalkan kinerja produksi akibat operasi steam flood.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perancangan proyek steamflood beserta analisis keekonomiannya.
  • Mempergunakan pengetahuan tentang reservoir management dan pengenelnalan teknologi mutakhir tentang steamflood, untuk keperluan peningkatan perolehan produksi minyak bumi.

PRE-REQUISITE :

Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

MATERI TRAINING :

Introduction

  • Introduction to EOR
  • EOR Production
  • EOR Concept
  • Screening Criteria
  • Thermal EOR
  • Chemical EOR
  • Miscible EOR

Steam Injection Processes

  • Cyclic Steam Injection
  • Continuous Steam Injection

Thermal Properties of Fluids and Solids

  • Thermal Properties
  • Temperature Effect on Fluid and Rock Properties
  • Thermodynamic Properties of Steam
  • Laboratory Analysis

Reservoir Geology and Thermal EOR

  • Geology Elements Affecting Steamflood Performance
  • Defining Effective Reservoir
  • Importance of Depositional Environment
  • Displaying The Geologic Model
  • Relationship Between Geologic and Simulation Models
  • Summary of Geologic Elements in Steamflooding

Surface Equipment and Operations

  • Steam Generation and Distribution
  • Oil/Gas Gathering and Treatment
  • Water Reclamation and Softening Plant

Downhole Equipment and Operations

  • Well Completion
  • Remedial Well Work
  • Well Stimulatuion
  • Profile Modification

Performance Prediction

  • Steam Metering and Heat Loss Calculation
  • Prediction of Cyclic Steam Performance
  • Prediction of Steamflood Performance
  • Fieldwide Forecast

Project Design and Evaluation

  • Steamflood Development Strategy
  • Evaluation and Screening of Candidates
  • Design Consideration
  • Project Modification

Steamflood Reservoir Management

  • Introduction to Steamflood Reservoir Management
  • Steamflood Design and Implementation
  • Injection Well Monitoring and Surveillance
  • Production Well Monitoring and Surveillance
  • Casing Vapor Collection System Monitoring and Surveillance
  • Observation Well Monitoring and Surveillance
  • Core Wells
  • Cross-Well Tomography
  • Data Management, Elevation and Interpretaion
  • Simulation Models as Reservoir Management Tools
  • Project Modification

Recent Advance s and Ongoing Developments in Steamflood Technology

  • Steam Generation and Distribution
  • Subsurface Equipment and Methods
  • Process Improvements
  • Reservoir Description
  • Performance Prediction
  • Future Technology Needs

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641, 0821 3874 5980

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Well Injection Production and Reservoir Synergetic System For Steam Flood Processes 2025:

  • 24-26 November 2025 Bandung
  • 22-24 Desember 2025 Bali

Jadwal Training Well Injection Production and Reservoir Synergetic System For Steam Flood Processes 2026:

  • 06-08 Januari 2026 Malang
  • 03-05 Februari 2026 Jakarta
  • 03-05 Maret 2026 Surabaya
  • 07-09 April 2026 Bali
  • 05-07 Mei 2026 Bandung
  • 03-05 Juni 2026 Malang
  • 01-03 Juli 2026 Surabaya
  • 04-06 Agustus 2026 Yogyakarta
  • 02-04 September 2026 Surabaya
  • 06-08 Oktober 2026 Bogor
  • 03-05 November 2026 Bali
  • 02-04 Desember 2026 Surabaya

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • IDR. 12.000.000,-/peserta (Jakarta) (Harga belum termasuk pajak dan promo)
  • IDR. 12.000.000-/peserta (Bandung)  (Harga belum termasuk pajak dan promo)
  • IDR. 13.100.000,-/peserta (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • IDR. 15.300.000,-/peserta (Bali) (Harga belum termasuk pajak dan promo)
  • IDR. 16.100.000,-/peserta (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/peserta (Malaysia) (Harga belum termasuk pajak dan promo)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Pump : ESP, Hydraulic and Sucker Rod

Training Pump : ESP, Hydraulic and Sucker Rod

 TARGET DAN TUJUAN :Setelah menyelesaikan training ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan reservoir minyak bumi yang berhubungan dengan penggunaan electric submersible, sucker-rod, hydraulic dan jet pump (SRP, ESP, Hydraulic and Jet Pump)..
  • Melakukan diagnosis sederhana dan mengerti pengelolaan data sumuran minyak yang diproduksi dengan electric submersible,  sucker rod pumping, hydraulic dan jet pump.
  • Membuat analisis sederhana terhadap data sumuran minyak, melakukan perhitungan-perhitungan kinerja sumuran sebagai hasil dari pemompaan dengan berbagai metoda sesuai dengan keadaan reservoirnya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dan melakukan optimisasi produksi untuk sumuran minyak yang diproduksi dengan electric submersible, sucker rod pumping, hydraulic dan jet pump sesuai dengan batasan operasinya.

PESERTA YANG DIREKOMENDASIKAN: Latar belakang  : Operator/Sr. Operator/ Jr.Engineer/Engineer MATERI TRAINING : SISTEM PRODUKSI LAPANGAN MINYAK BUMI

  • Sistem Produksi Alamiah
  • Sistem Produksi Dengan Pengangkatan Buatan

ELECTRIC SUBMERSIBLE PUMP

  • Pendahuluan
  • Dasar-dasar perhitungan ESP
  • Konstruksi ESP
  • Karakteristik pompa SRP
  • Cara Memilih jenis pompa
  • Aplikasi di Lapangan

POMPA HIDRAULIK

  • Alat-alat permukaan
  • Jenis-jenis unit pompa
  • Jenis-jenis unit pompa
  • Ukuran pompa
  • Langkah-langkah pada pemilihan pompa hidraulik

POMPA JET

  • Pendahuluan
  • Persoalan gas
  • Ukuran Nozzle dan throat
  • Langkah-langkah pada perhitungan Jet pump
  • Grafik Kelakuan pompa
  • Menggunakan program mesin hitung
  • Hasil lapangan

SUCKER ROD PUMP

  • Pendahuluan
  • Pump Intake Curve
  • Optimisasi Produksi
  • Rancangan Sucker Rod Pump API RP11L
  • Komponen Alat Utama
  • Faktor-faktor yang mempengaruhi gerakan rod
  • Perencanaan pompa
  • Dynagraph & Dynamometer

PCV (PROGRESSIVE CAVITY PUMP)

  • Pendahuluan
  • Deskripsi Peralatan
  • Elastomer
  • Perancangan

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641, 0821 3874 5980

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Pump : ESP, Hydraulic and Sucker Rod tahun 2025:

  • 03-05 November 2025 Bogor
  • 01-03 Desember 2025 Malang

Jadwal Training Pump : ESP, Hydraulic and Sucker Rod tahun 2026:

  • 06-08 Januari 2026 Malang
  • 03-05 Februari 2026 Jakarta
  • 03-05 Maret 2026 Surabaya
  • 07-09 April 2026 Bali
  • 05-07 Mei 2026 Bandung
  • 03-05 Juni 2026 Malang
  • 01-03 Juli 2026 Surabaya
  • 04-06 Agustus 2026 Yogyakarta
  • 02-04 September 2026 Surabaya
  • 06-08 Oktober 2026 Bogor
  • 03-05 November 2026 Bali
  • 02-04 Desember 2026 Surabaya

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • Rp. 11.450.000,-/peserta (Jakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 11.450.000-/peserta (Bandung) (Harga belum termasuk pajak dan promo)
  • Rp. 12.550.000,-/peserta (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 14.200.000,-/peserta (Bali) (Harga belum termasuk pajak dan promo)
  • Rp. 15.100.000,-/peserta (Lombok) (Harga belum termasuk pajak dan promo)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Copyright © 2025 Training Oil Gas | Pusat Manajemen | Pelatihan Rumah Sakit
Butuh bantuan! Klik disini

Kami siap membantu, silahkan berkomunikasi langsung dengan Tim Kami yang sedang online saat ini. Jika jaringan sedang sibuk, mungkin karena sedang melayani pelanggan lain. Untuk respon cepat silahkan kirim email ke: [email protected] untuk pelayanan via Help Desk

Customer Support

Umu Hanifatul - Head Office

Online

Customer Support

Shinta (AI)

Online

Customer Support

Rizkya - Head Office

Online

Customer Support

Andini Eryani - Head Office

Online

Umu Hanifatul - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Shinta (AI)Customer Support

Hi, Ada yang Bisa saya bantu pak/bu? 00.00

Rizkya - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Andini Eryani - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00