Training Quantitave log Analysis and Petrophysics

LATAR BELAKANG :

Setelah menyelesaikan training ini diharapkan peserta dapat :

  • Memahami prinsip dasar dan teknologi mutahir tentang logging batuan termasuk cased hole logging.
  • Melakukan diagnosis sifat-sifat sumuran dan evaluasi reservoir dengan interpretasi hasil logging conventional maupun cased holed logging.
  • Membuat analisis dan dapat menentukan kemampuanproduksi sumuran dari interpretasi data logging
  • Memengerti prinsip-prinsip modern untuk perhitungan wellsite computed log

PESERTA YANG DIREKOMENDASIKAN :

Operator/Sr. Operator/Engineer/Non-Engineer/Jr. Geologist

PRE-REQUISITE :

  • Mempunyai pengetahuan dasar geologi hidrokarbon
  • Mempunyai pengetahuan dasar evaluasi formasi dan reservoir hidrokarbon

MATERI TRAINING :

Pengertian Tentang Lingkungan Logging Konvensional

  • Geometri Sumuran Hidrokarbon
  • Pelaksanaan Logging
  •  Gangguan-gangguan yang terjadi

Evaluasi Hidrokarbon

  • Dasar-dasar interpretasi
  • Pengaruh Invasi Lumpur

Zona Permeabel

  • SP Log
  • Gamma ray Log
  • Electromagnetic Log

Log untuk Clean Formation

  • Resistivity-Porosity Crossplot
  • Identifikasi Multimineral

Log untuk Shaly Formation

  • Distribusi Shale dan Clay
  • Cation Excvhage Capacity
  • Model Interpretasi Shaly sand
  • Metoda Dual Water

Penentuan Produktivitas Sumuran

  • Permeabilitas dan Penentuannya
  • Saturasi Air Irreducible
  • Multiple Formation Tester

Wellsite Computed Logs

  • Log Rwa
  • Porosity Overlay
  • Resitivity Overlay
  • SP Overlay
  • Cyberlook Log
  • Analisis Prolog

Electromagnetic Propagation Log

  • EPT Log
  • ADEPT : The Adaptable Tool
  • Interpretation Method
  • CRIM Method
  • CTA Method
  • Tpo Method
  • Endfire Array
  • Brodside Array
  • Deep Propagation Tool (DPT)

Formation Evaluation in Cased Hole

  • Logs for Cased Hole Formation Evaluation
  • Natural Gamma Ray Log
  • Neutron Log
  • Sonic Log
  • Thermal Decay Time Log  (TDT)
  • Gamma Ray Spectromerty Tool (GST)
  • Cement Evaluation
  • CBL/VDL Measurement
  • Compesated Cement Bond Tool
  • Cement Evaluation Tool

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Quantitave log Analysis and Petrophysics tahun 2024:

  • 13-15 Mei 2024 Bogor
  • 10-12 Juni 2024 Bali
  • 08-10 Juli 2024 Jakarta
  • 12-14 Agustus 2024 Yogyakarta
  • 09-11 September 2024 Bandung
  • 07-09 Oktober 2024 Surabaya
  • 11-13 November 2024 Bogor
  • 09-11 Desember 2024 Malang

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training PVT and Reservoir Fluid Analysis

INTRODUCTION

Hydrocarbon systems found in petroleum reservoirs are known to display multi-phase behavior over wide ranges of pressure and temperatures. The most important phases which is occur in petroleum reservoirs are: liquid phase (crude oil or condensates) and gas phase (natural gases).  This course will explain the fundamentals of hydrocarbon phase behavior and practical application in reservoir and production engineering. Firstly it will reviews the principles of phase behavior and ilustrate the use of phase diagram in describing the volumetric behavior of single-component, two-component, and multi-component system.

Also it will present numerous mathematical and graphical correlation for estimating physical and critical properties of the undefined petroleum fraction, evaluation of properties of natural gases and introduces their application in Darcy’s equation and material balance equation.  A complete and cohesive independent unit on methods of determining the crude oil physical properties , presents the concept and application of  vapor-liquid phase equilibria, developments and advanced in the field of empirical cubic equation of state and application in petroleum engineering. Details sceheme of splitting and lumping of petroleum-fraction.

Properly understanding the reservoir fluid properties is very significant and are very importance steps  during the entire life of the oil and reservoir developments and operations. This five-day training will provide a comprehensive knowledge and understanding of reservoir fluid properties and application to reservoir and production engineering to keep exellent reservoir and production performance as long as possible.

OBJECTIVES

  • Refresh the knowledge of the participants on reservoir fluid properties.
  • Understand the basic principles of hydrocarbon phase behavior and it’s application in petroleum engineering.
  • Learn the numerous mathematical and graphical correlation for estimating physical and critical properties of the undefined petroleum fraction
  • Enhance the knowledge on hydrocarbon phase behavior , freservoir fluid properties and application.
  • Gain additional knowledge on reasent technology in reservoir fluid properties calculation and correlation.
  • Knowledge sharing among the participants and instructors

FEATURING THE FOLLOWING SUBEJCTS

Basic Phase Behavior

  • Single Component  Systems
  • Two Component  Systems
  • Multy Component  Systems
  • Classification of Reservoir and Reservoir Fluids

Pure Component Physical Properties and Characterizing Undefined Petroleum Fraction

  • General Correlation for Estimating Physical Properties of Hydrocarbon Fraction
  • Critical Compressibility Factors
  • Characterizing Hydrocarbon Heavy Fractions
  • Determining of Physical Properties of Heavy Petroleum Fraction from Correlation

Properties of Natural Gases

  • Behavior of Ideal Gases
  • Ideal Gas Mixtures
  • Properties of Ideal Gas Mixtures
  • Behavior of Real Gases
  • Effect of Non Hydrocarbon Components on the Z-Factor
  • Correction for Non Hydrocarbons
  • Correction for High-Molecular-Weight Gases
  • Direct Calculation of Compressibilty Factors
  • Compressibility of Natural Gases
  • Gas Formation Volume Factor
  • Gas Viscosity
  • Engineering Application of natural gases PVT Properties

Phase Behavior of Crude Oils

  • Crude Oil Density and Specific Gravity
  • Methods for Determining Density of Crude Oils as Unknown Composition
  • Methods for Determining Density of Liquids as Unknown Composition
  • Isothermal Compressibility Coefficient of Undersaturated Crude Oils
  • Density of Undersarurated Crude Oils
  • Gas Solubility
  • Oil Formation Factor of Undersaturated Crude Oils
  • Total Formation Volume Factor
  • Total System Isothermal Compressibility Coefficient
  • Crude Oil Viscosity
  • Bubble Point and Surface Tension
  • Application of the Crude Oil PVT P
  • The Material Balance Equation for Oil Reservoirs

Vapor-Liquid Phase Equilibria

  • Equilibrium Ratio
  • Flash Calculation
  • Application of Equilibrium Ratio in Petroleum Engineering

Equation of State

  • The General ized Form of Equation of State
  • Application of Equation of State for Petroleum Engineering
  • Three-Phase Equilibrium Calculation

Splitting Lumping Schemes of Petroleum Fraction

  • Splitting Schemes
  • Lumping Schemes
  • Simulation of Laboratory PVT Data by Equation of State

Physical Properties of  Crude Oil Determination

  • Density
  • Viscosity
  • Surface Tension
  • Flash Point
  • Pour Point
  • Sulphur Contents
  • Basic Sediment and Water

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training PVT and Reservoir Fluid Analysis year 2024:

  • 20-22 Mei 2024 Medan
  • 05-07 Juni 2024 Jakarta
  • 03-05 Juli 2024 Bali
  • 07-09 Agustus 2024 Bogor
  • 04-06 September 2024 Surabaya
  • 02-04 Oktober 2024 Bandung
  • 06-08 November 2024 Yogyakarta
  • 04-06 Desember 2024 Jakarta

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

Training Gas Reservoir and Field Production

TARGET & TUJUAN TRAINING :

Setelah menyelesaikan training  ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar eksploitasi gas bumi yang dikenal sebagai teknologi perminyakan.
  • Melakukan diagnosis sederhana dan memahami pengelolaan data operasi produksi gas bumi, seperti data geologi produksi, data batuan dan fluida reservoir, data produksi, data operasi pemboran bahkan data analisis keekonomian.
  • Membuat analisis sederhana terhadap data tersebut dan melakukan pengolahannya dengan mempergunakan metoda standar dalam teknologi gas bumi.
  • Melakukan perhitungan-perhitungan kuantitatif sederhana dari seluruh data perolehan operasi produksi gas bumi : geologi produksi, evaluasi data formasi produktif, data reservoir, data pemboran, data produksi bahkan data keekonomian.

PRE-REQUISITE :

Latar belakang beragam : Operator, Sr. Operator, Engineering dan Non Engineering

MATERI TRAINING :

Pengertian Tentang Data Teknik Operasi Produksi Gas Bumi dan Teknik Pengelolaannya

  • Data Geologi Produksi
  • Data Teknik Reservoir
  • Data Teknik Pemboran
  • Data Teknik Produksi
  • Data Analisis Keekonomian

Reservoir  Gas Bumi

  • Kondisi Terbentuknya Reservoir
  • Tekanan dan Temperatur Reservoir
  • Fluida Reservoir
  • Batuan Reservoir

Evaluasi Formasi Reservoir Gas Bumi

  • Penentuan Formasi Permeabel
  • Penentuan Porositas Batuan
  • Penentuan Saturasi Fluida
  • Penentuan ketebalan Reservoir Rata-rata
  • Peralatan yang Terkait dengan Pelaksanaan Evaluasi Formasi

Pemboran Sumur Gas Bumi

  • Operasi
  • Biaya
  • Complesion
  • Fluida Pemboran
  • Data Akuisisi
  • Optimasi Pemboran
  • Problema Khusus Pemboran
  • Peralatan yang Terkait dengan Pelaksanaan Pemboran

Perkiraan Cadangan

  • Volume In-place
  • Ketebalan Batuan
  • Peta Iso Porositas
  • Peta iso Kapasitas
  • Recovery Factor (Faktor Perolehan)

Cara Produksi Reservoir Gas Bumi

  • Inflow Performance Relationship
  • Peralatan yang Terkait dengan Fasilitas Produksi di Bawah Permukaan

Fasilitas Produksi di Permukaan

  • Field Processing Unit
  • Sistem Pemipaan Gas Bumi
  • Peralatan yang Terkait dengan Fasilitas Produksi di Permukaan

Analisa Kinerja Reservoir

  • Perolehan Reservoir Gas
  • Efisiensi Perolehan Gas Bumi
  • Keseimbangan Materi
  • Peramalan Kinerja Produksi

Prinsip-prinsip Dasar Analisis Keekonomian

  • Parameter Utama Analisis Keekonomian
  • Net Present Value
  • Internal Rate of Return
  • Pay Out Time
  • Profit to Invesment Ratio
  • Beberapa Contoh Kasus

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Gas Reservoir and Field Production tahun 2024:

  • 29-31 Mei 2024 Bandung
  • 26-28 Juni 2024 Yogyakarta
  • 24-26 Juli 2024 Jakarta
  • 28-30 Agustus 2024 Bali
  • 25-27 September 2024 Bogor
  • 23-25 Oktober 2024 Surabaya
  • 27-29 November 2024 Bandung

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Gas Plant Operation and Maintenance

OBJECTIVES :

After participate in this training, the participants will be able and capable to :

  • Understand the basic concept of gas plant handling  processes operation and maintenance , and how to operate this technology in field application.
  • Diagnostic of gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development gas plant  processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of gas plant handling processes, operation and maintenance.

AUDIENCE: No specified  (Operator/ Sr. Operator/Engineer or Non Engineer) COURSE OUT-LINE:Introduction to Gas Plant Process Operation and Maintenance

  • Description of Gas Plant Operation and Maintenance
  • Basic Equation on Gas Flow
  • Gas Handling and Process
  • Gas Plant Maintenance

Real Gas

  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservoir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Gas Compression

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis

  •  Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition

Gas Processing

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

DURATION

3 Day

FASILITY

Normal Class

Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Gas Plant Operation and Maintenance Year 2024:

  • 15-17 Mei 2024 Yogyakarta
  • 12-14 Juni 2024 Jakarta
  • 10-12 Juli 2024 Bali
  • 14-16 Agustus 2024 Bogor
  • 11-13 September 2024 Surabaya
  • 09-11 Oktober 2024 Bandung
  • 13-15 November 2024 Yogyakarta
  • 11-13 Desember 2024 Jakarta

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • IDR. 11.000.000,-/participant (Jakarta)
  • IDR. 11.000.000-/participant (Bandung)
  • IDR. 12.000.000,-/participant (Yogyakarta)
  • IDR. 14.000.000,-/participant (Bali)
  • IDR. 14.750.000,-/participant (Lombok)
  • US$ 4780/participant (Malaysia)

Available on request for time, place and facilities call us for more information

Training Gas Production Engineering

INTRODUCTION

Training Gas Production Engineering – The formation of natural gas is comprised of methane, a gas (or compound) composed of one carbon atom and four hydrogen atoms. The result of natural processes over millions of years ago, from the remains of plants and animals (diatoms) decayed and covered in a thick layer. The rest of the plants and animals is called organic material is then decomposed. Over time, sand and mud turns into rock, covered the organic material trapped under rocks. Pressure and heat changed most of the organic material into coal, some into oil (petroleum), and some into natural gas – tiny bubbles of gas is odorless.

now gas resource is human choices today as an energy source in the world. therefore developed a range of technologies to produce natural gas that is formed in the bottom of the earth. as a consultant to the natural gas production, BMD Street Consulting intends to run a program Training Gas Production Engineering is expected to provide an understanding and ability to practitioners in the world of oil and gas in order to maximize the technology of production natural gas

OBJECTIVES :

After participate in this training, the participants will be able and capable to :

  • Understand the basic concept of gas reservoir, well pruduction performance, gas well testing and handling processes and operation, and how to operate this technology in field application.
  • Diagnostic of gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of gas handling processes and operation.

AUDIENCE:

No specified  (Operator/ Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Reservoir Aspect of Gas Production Engineering

  • Reservoir Gas
  • Gas Reserves

Optimization Gas Well Performance

  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

The Critical View of Field Gas Processing

  • Sulfur Removal
  • Natural Gas  Flow Measurement

Natural Gas  Transportation

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  •  Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Natural Gas Compression

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

LPG
Optimization-liquid Flow In Pipe
Economic Analysis Of Gas Production
Case Study
Discussion

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Gas Production Engineering year 2024:

  • 27-29 Mei 2024 Bali
  • 24-26 Juni 2024 Surabaya
  • 22-24 Juli 2024 Bogor
  • 26-28 Agustus 2024 Bali
  • 23-25 September 2024 Jakarta
  • 21-23 Oktober 2024 Yogyakarta
  • 25-27 November 2024 Bandung

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • IDR. 11.000.000,-/participant (Jakarta)
  • IDR. 11.000.000-/participant (Bandung)
  • IDR. 12.000.000,-/participant (Yogyakarta)
  • IDR. 14.000.000,-/participant (Bali)
  • IDR. 14.750.000,-/participant (Lombok)
  • US$ 4780/participant (Malaysia)

Available on request for time, place and facilities call us for more information

Training Gas Detection and Flow Measurement

OBJECTIVES :

This course is intended to give a breadth and depth analysis in gas detection problems which are actually and frequently occurred in the field. In this course the way to diagnose and solve the problem will be shown. Beside that how to detect ant determine micelleneous constituents in gas will be presented too.

GOALS :

The participants will be brought to current methods in analyzing gas detection problems that occured in actual fields. Skills in identifying various problems will be build during the course. The modern technique uses a relatively complicated method, but, more accurate and serves much more information needed for gas detection and analysis.

After participate in this course, the participants will be able and capable to :

  • Understand the basic concept of gas handling processes and operation, and how to operate this technology in field application.
  • Diagnostic of gas detection in oil and gas field under actual drive mechanism and future performance with current handling processes.
  • Analyze the gas detection under with actual handling system processes using various methods and to plan the better development of gas processing system.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of gas  detection, calculation and operation.

AUDIENCE:

No specified  (Operator/ Sr. Operator/Engineer or Non Engineer) 

COURSE OUT-LINE:

Introduction to Gas Process and Operation

Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Detection and Sampling

  • Size and Type of Sampling
  • Standard Conditions for Sampling
  • Sample Lines and Connections
  • Confining Fluids
  • Metering Samples
  • Collection of Samples

Volumetric Analysis of Gas by Chemical Methods

  • Theory of Gas Analysis
  • Analytical Apparatus
  • Accuracy and Precision
  • Absorbent  Solutions for Gaseous Components
  • Combustion Methods for Gaseous Components
  • Analytical Procedures

Low Temperature Fractional Distillation Analysis

  • Introduction
  • Fractional Apparatus
  • Application of Fractional Apparatus

Other Analytical Methods

  • Mass Spectrometer
  • Infra Red Analyser
  • Gas Chromatograph

Detection and Determination of Micellaneous Constituents

  • Hydrogen Sulfide
  • Organic and Total Sulfur
  • Water Vapor
  • Nitrogen Compounds

Detection  and Determination of CarbonMonoxide in Minute Concentrations

  • Maximim Allowance Concentration of CarbonMonoxide in Air Breathed
  • Micellaneous for Trace Detention and Determination

Detection and Determination of Suspended Particles

  • Sampling
  • Dust Detection and Determination
  • Tar Detection and Determination

Gas Calorimetry

  • Water-Flow Calorimetry
  • Cutler-Hammer Recording Calorimetry
  • Other Recording Calorimeter

Gas Density and Specific Gravity

  • Density
  • Specific Gravity

Gas Pressure Meaurements

  • Pitot Tubes
  • Liquid Column Manometers
  • Multiplying Gages
  • Micromanometers
  • Gages for Locating Liquid Surface
  • Mechanical Pressure Gages
  • Gage Calibration
  • Vacuum or Low Absolute Pressure Gages
  • Laboratory Determination of Gas Appliance Pressure Drop

Gas Temperature Measurements

  • Flue Gas Temperature Measurements
  • Liquid-in-Glass Thermometers
  • Liquid-Expansion Thermometers
  • Liquid Pressure Thermometers
  • Gas-and Vapor-Prewssure Thermometers
  • Bimetallic Thermometers
  • Thermocouples
  • Resitance Thermometers
  • Radiation Pyrometers
  • Optical Pyrometers
  • Electrical Temperature Measuring Instruments
  • Pyrometric Cones, Crayons, Pellets, Lacquer
  • Calibration of Temperature Instruments
  • SurfaceTemperatrure
  • BTU Meters

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Gas Detection and Flow Measurement year 2024 :

  • 20-22 Mei 2024 Medan
  • 05-07 Juni 2024 Jakarta
  • 03-05 Juli 2024 Bali
  • 07-09 Agustus 2024 Bogor
  • 04-06 September 2024 Surabaya
  • 02-04 Oktober 2024 Bandung
  • 06-08 November 2024 Yogyakarta
  • 04-06 Desember 2024 Jakarta

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

Training Basic Reservoir Engineering

Course Objectives :

  • Understand the basic concepts of reservoir engineering
  • Understand the basic calculations of the reserve and recovery of an oil or gas reservoir
  • Understand the techniques and procedures of sand control, acidizing, and hydraulic fracturing to increase recovery from a reservoir
  • Understand the basics of oil and gas flow behavior in reservoir
  • Knowledge of Enhanced Oil Recovery purpose and techniques

Who Should Attend

Reservoir Engineer, Geologists, Project Engineers, Production Supervisors and Engineers, Well Service Supervisors and Engineer, Workover Supervisors and Engineers, etc.

Course Contents :

Oil & Gas Reservoir

  • Accumulation of Organic Material in Sediment
  • Organic Accumulation Environment
  • Oil & Gas Existence in Reservoir

Reservoir Fluid & Rock Properties

  • Porosity
  • Permeability
  • Reservoir Parameter Measurement
  • Oil Components
  • Oil Phase
  • Phase Behavior

Fluid Distribution in Reservoir

  • Wettability
  • Surface Tension
  • Capillary Pressure
  • Fluid Distribution

Reservoir Driving Mechanism

  • Water drive
  • Depletion drive
  • Gas cap drive
  • Combination

Reserve Estimation & Recovery Factor

  • Estimation of oil-gas in place
  • Estimation of reserve
  • Estimation of recovery factor

Reserve Estimation & Decline Curve

  • Volumetric Method
  • Material Balance Method
  • Saturated Reservoir
  • Undersaturated Reservoir
  • Gas Reservoir
  • Decline Curve

Basic of Fluid Flow

  • Darcy Law
  • Fluid Viscosity
  • Fluid Compressibility
  • Reservoir Fluid Flow
  • Poiseuilles Capillary Law
  • Productivity Index
  • Zonal damage and well stimulation

Formation Evaluation

  • Purpose of Formation Evaluation
  • Formation Evaluation Method
  • Logging Equipment
  • Log Analysis

Well Testing

  • Pressure Build Up testing
  • Pressure Draw Down testing
  • Production Testing

Acidizing

  • Basic Acidizing
  • Acidizing Types
  • Acidizing Considerations
  • Acid in Stimulation
  •  Acidizing Design

Hydraulic Fracturing

  • Damage around Wellbore
  • Fracturing Considerations
  • Rock Properties & Measurement
  • Fracture Geometry
  • Fracturing Operation Design
  • Case Problem

Enhanced Oil Recovery (EOR)

  • Water flooding
  • Thermal
  • Chemical
  • Miscible flooding

Field Management

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

081382807230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Basic Reservoir Engineering year 2024 :

  • 27-29 Mei 2024 Bali
  • 24-26 Juni 2024 Surabaya
  • 22-24 Juli 2024 Bogor
  • 26-28 Agustus 2024 Bali
  • 23-25 September 2024 Jakarta
  • 21-23 Oktober 2024 Yogyakarta
  • 25-27 November 2024 Bandung

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp.5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

 

Training Quantitative Log Analysis and Petrophysics

LATAR BELAKANG

Setelah menyelesaikan Training Quantitative Log Analysis and Petrophysics ini diharapkan peserta dapat :

  • Memahami prinsip dasar dan teknologi mutahir tentang logging batuan termasuk cased hole logging.
  • Melakukan diagnosis sifat-sifat sumuran dan evaluasi reservoir dengan interpretasi hasil logging conventional maupun cased holed logging.
  • Membuat analisis dan dapat menentukan kemampuan produksi sumuran dari interpretasi data logging
  • Memengerti prinsip-prinsip modern untuk perhitungan wellsite computed log

PESERTA

Operator/Sr. Operator/Engineer/Non-Engineer/Jr. Geologist

PRE-REQUISITE :

  • Mempunyai pengetahuan dasar geologi hidrokarbon
  • Mempunyai pengetahuan dasar evaluasi formasi dan reservoir hidrokarbon

MATERI TRAINING :Pengertian Tentang Lingkungan Logging Konvensional

  • Geometri Sumuran Hidrokarbon
  • Pelaksanaan Logging
  • Gangguan-gangguan yang terjadi

Evaluasi Hidrokarbon

  • Dasar-dasar interpretasi
  • Pengaruh Invasi Lumpur

Zona Permeabel

  • SP Log
  • Gamma ray Log
  • Electromagnetic Log

Log untuk Clean Formation

  • Resistivity-Porosity Crossplot
  • Identifikasi Multimineral

Log untuk Shaly Formation

  • Distribusi Shale dan Clay
  • Cation Excvhage Capacity
  • Model Interpretasi Shaly sand
  • Metoda Dual Water

Penentuan Produktivitas Sumuran

  • Permeabilitas dan Penentuannya
  • Saturasi Air Irreducible
  • Multiple Formation Tester

Wellsite Computed Logs

  • Log Rwa
  • Porosity Overlay
  • Resitivity Overlay
  • SP Overlay
  • Cyberlook Log
  • Analisis Prolog

Electromagnetic Propagation Log

  • EPT Log
  • ADEPT : The Adaptable Tool
  • Interpretation Method
  • CRIM Method
  • CTA Method
  • Tpo Method
  • Endfire Array
  • Brodside Array
  • Deep Propagation Tool (DPT)

Formation Evaluation in Cased Hole

  • Logs for Cased Hole Formation Evaluation
  • Natural Gamma Ray Log
  • Neutron Log
  • Sonic Log
  • Thermal Decay Time Log  (TDT)
  • Gamma Ray Spectromerty Tool (GST)
  • Cement Evaluation
  • CBL/VDL Measurement
  • Compesated Cement Bond Tool
  • Cement Evaluation Tool

INVESTASI (TIDAK TERMASUK BIAYA AKOMODASI & PENGINAPAN): 

  • Rp. 10.500.000,-/peserta (Jakarta)
  • Rp. 10.500.000-/peserta (Bandung)
  • Rp. 11.500.000,-/peserta (Yogyakarta)
  • Rp. 13.000.000,-/peserta (Bali)
  • Rp. 13.750.000,-/peserta (Lombok)

DURASI

3 Hari

FASILITAS

Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

INFORMASI & PROMO

Hub : 021 – 756 3091

Fax : 021 756 3291

CONTACT PERSON

0852  1000 5065, 0813 8280 7230

JADWAL TRAINING QUANTITATIVE LOG ANALYSIS AND PETROPHYSICS TAHUN 2024 :

  • 06-08 Mei 2024 Bogor
  • 03-05 Juni 2024 Bali
  • 01-03 Juli 2024 Jakarta
  • 05-07 Agustus 2024 Yogyakarta
  • 02-04 September 2024 Bandung
  • 01-03 Oktober 2024 Surabaya
  • 04-06 November 2024 Bogor
  • 02-04 Desember 2024 Malang

Training Pump and Turbine Selection,Design and Operation for Oil and Gas Production Facilities

OBJECTIVES :

After participate in this training, the participants will be able and capable to :

  • Understand the basic concept of oil and gas handling with surface processes and operation facilities , and how to operate pump and turbine technology in field application.
  • Diagnostic of oil and gas flow  performance under actual pumping drive mechanism and future performance with current handling processes.
  • Analyze the production flow potential of oil and gas flow under actual handling facilities system processes and to plan the better development processes according to fluid flow capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects the phenomena of oil and gas handling processes and operation with given surface facilities and pumping using turbine system.

AUDIENCE:

No specified  (Operator/ Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Introduction to Oil and Gas Production Operation

Oil Surface Production Facilities

  • Well Equipments
  • Pigging System
  • Separator
  • Gas Scrubber
  • Gas Dehydarator
  • Pumps : Centrifugal, Reciprocating, Diaphragm

Gas Surface Processing Facilities

  • Gas Sweetening
  • Heat Exchanger
  • Fractination, Liquification, Refrigeration System
  • Compressor

Pump Basic Theory

  • Centrifugal Pump
  • Conservation of Mass
  • Specific Velocity
  • Pump Performance
  • Cavitation

Pump Specification

  • Pump Specification
  • Flow Capacity
  • Fluid Properties
  • Head
  • Net Positive Heads
  • Rotation Determination and Pump Types
  • Viscous Fluid Correction
  • Material Selection
  • Prime Movers Selection

Pump Application

  • Pump Instalation Plan
  • Pump Application Example

Pump Construction

  • Pump Classification by Impeller
  • Pump Classification by Casing
  • Pump Classification by Stage Number
  • Pump Classification by Axis Position

Pump Operation

  • Head Capasity Curve
  • Parallel and Serrial Operation
  • Capasity Regulator
  • Water Hummer
  • Surging
  • Pressure Fluctuation
  • Automatic Operation

Pump Instalation

  • Horizontal Instalation
  • Vertical Instalation
  • Submersible Instalation
  • Pipping System
  • Vibration and Noise Protection

Pump Maintenance

  • First Inspection
  • Operation Condition Obervation
  • Savety Instrument
  • Maintenace Management
  • Overhaul

Pump Trouble Shooting

  • General Trouble Shooting
  • Submersible Pump Trouuble Shooting

Turbine Fundamental Concept

  • Gas turbine thermodynamics
  • Machinery components analysis : Compressor, Combustor, Gas producer turbine and Power turbine, sealing system
  • Gas turbine performance
  • Off design behavior
  • Gas turbine material
  • Gas turbine control (speedtronic) and instrument

Gas Turbine operation and maintenance

  • Gas turbine predictive maintenance and preventive maintenance
  • (Vibration, lube oil analysis) and interval maintenance
  • Gas turbine failure and failure analysis (case study)
  • Life cycle cost (Cost effectives) of gas turbine
  • Selection and Application gas turbine of gas transmission and pumping

DURATION

3 Day

FASILITY

Normal Class

Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Pump and Turbine Selection,Design and Operation for Oil and Gas Production Facilities year 2024:

  • 20-22 Mei 2024 Bogor
  • 03-05 Juni 2024 Bali
  • 01-03 Juli 2024 Jakarta
  • 05-07 Agustus 2024 Yogyakarta
  • 02-04 September 2024 Bandung
  • 01-03 Oktober 2024 Surabaya
  • 04-06 November 2024 Bogor
  • 02-04 Desember 2024 Malang

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 13.750.000,-/peserta (Lombok)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Pengelolaan lapangan Mature, Tehnik & Strategi Meningkatkan Produksi

LATAR BELAKANG :

Setelah menyelesaikan training ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan dan melakukan optimisasi pada saat operasi produksi sumur-sumur dan reservoir minyak, gas dilaksanakan, pengembangan pelaksannaan optimisasi produksi ini untuk meningkatkan kinerja produksi sumuran dan lapangan mature.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian permasalahan dalam operasi produksi sumur-sumur minyak dan gas bumi lapangan mature dan mencari strategi meningkatkan produksinya.
  • Membuat analisis sederhana terhadap data sumuran minyak, gas dan panas bumi ,melakukan peramalan kinerja dan merencanakan pengembangn operasi produksi lapangan mature.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dari seluruh data perolehan data tubing, flowline, choke, perforasi, gravel-pack, sub-surface savety valve pada sumuran, merencanakan pengembangannya dengan memperhitungan kemampuan masing-masing sumuran pada lapangan mature.
  • Mempergunakan pengetahuan operasi produksi untuk keperluan penyelesaian permasalahan sumur seperti : pada saat penyemenan, penanganan scale, pasir, korosi dan damage yang mungkin terjadi pada sumuran minyak dan gas bumi lapangan mature.
  • Memahami prinsip-prinsip dasar perancangan : penyemenan, workover, stimulasi sumuran dengan  pengasaman dan perekahan hidrololik, perencanaan work over dan lain-lain untuk lapangan mature.

PRE-REQUISITE :

Latar belakang  : Operator, Senior Operator, Engineer/Non Engineer

MATERI TRAINING :

Geologic Considerations in producing Operation

  • Introduction
  • Sandstone Reservoirs
  • Geologic Factors Affecting Reservoir Properties in Sandstone
  • Application of Geologic concepts in Specific Sandstone
  • Carbonate Reservoirs
  • Application of Geologic Concepts in Carbonate Reservoirs

Reservoir Considerations in Well Completions

  • Introduction
  • Hydrocarbon Properties of Oil and Gas
  • Recommendations of Obtaining Good Test Data
  • “Eyeball” Interpretation of Pressure Charts

Well Completion Design

  • Factors Influencing Well Completion Design
  • Conventional Tubular Configuration
  • Unconventional Tubular Configurations
  • Sizing Production Tubular
  • Completion Interval
  • Permanent Well Completions (PWC)
  • Tubingless Completion

Tubing Strings,Packers,Subsurface Control Equipment

  • Tubing Strings
  • Steel Grades
  • Tubing Connections
  • Make  up of API Threaded connection
  • Design of Tubing Strings
  • High Strength Tubing
  • Physical Properties of Steel
  • Sensitivities of High Strength Tubing
  • Tubing Inspection
  • Tubing Handling Practices
  • Equipment for Use With-Strength Tubing
  • Tubing Running Practices
  • API Publication List
  • Packers and Subsurface Control Equipment
  • Production Packers
  • Subsurface Control Equipment

Perforating Oil and Gas Wells

  • Introduction
  • Types of Perforators
  • Evaluation of Perforator Performance
  • Factors  Aftecting Gun Perforating Results
  • Perforating in a Clean Fluid with Differential Pressure Into Wellbore
  • A Comparison between the GEO-VANN System and Other Perforating Methods in Wells Equipped with Packers

Completion and Workover Fluids

  • Functions-Requirements-Selection Criteria
  • Formation Damage Related to Solids
  • Oil Fluids-Practical Application
  • Conventional Water-Base Mud
  • Oil Base or Invert-Emulsion Muds
  • Foam
  • Perforating Fluids
  • Packer Fluids
  • Well Killing

Production Logging

  • Introduction
  • Logging Device
  • Application of Production logging
  • Field Examples of Production Logging Techniques
  • Primary Cement Evaluation

Problem Well Analysis

  • Problem Wells
  • Problem Well Analysis Checklist

Parafin and Asphaltene

  • Introduction
  • Paraffin and Asphaltene Chemistry
  • Deposition Mechanisms
  • Removal of Wax Deposits
  • Preventing or Decreasing Wax Deposition
  • Design of Wax Control

Squeeze Cementing-Remedial Cementing

  • Introduction
  • Theoretical Considerations
  • Practical Considerations
  • Special Squeeze Cementing Situations
  • Planning a Squeeze Cement Job
  • Normal Operational Procedures
  • Other Operational Procedures
  • Plug-Back Operations
  • Special Cement Systems

Sand Control

  • Introduction
  • Reduction of Drag Force
  • Mechanical Methods of Sand Control
  • Practical Considerations in Gravel Packing
  • Use of screen Without Gravel
  • Resin Consolidation Methods

Formation Damage

  • Introduction
  • Basic Causes of Damage
  • Classification of Damage Mechanisms
  • Reduced Absolute Permeability
  • Increased Fluid Viscosity (Emulsion)
  • Diagnosis of Formation Damage

Surfactants for Well Treatments

  • Characteristics of Surfactants
  • Use and Action of Surfactant
  • Formation Damage Susceptible to Surfactant Treatment
  • Preventing or Removing Damage
  • Well Stimulation With Surfactants
  • Increasing Effectiveness of Rod Pumping
  • Prevention of Well Damage

Acidizing

  • Acids Used in Well Stimulation
  • Acid Additives
  • Carbonate Acidizing
  • Acidizing Techniques for Caronat Formations
  • Sandstone Acidizing
  • Potential Safety Hazard in Acidizing

Hydraulic Fracturing

  • Introduction
  • Mechanics of Fracturing
  • Production Increase from Fracturing
  • Propping the Fracture
  • Frac Fluids
  • Frac Job Design
  • Frac Job Evaluation Techniques

Scale Deposition,Removal,and Prevention

  • Introduction
  • Causes of Scale Deposition
  • Prediction and Identification of Scale
  • Scale Removal
  • Scale Prevention

Corrosion Control

  • The Corrosion Process
  • Detection and Measurement of Corrosion
  • Corrosion Control

Workover and Completion Rigs Workover System

  • Conventional Production Rigs
  • Non-Conventional Workovers System
  • Concentric Tubing Workovers

Workover Planning

  • Reasons for Workover
  • Workover to Alleviate Formation Damage
  • Workover for Low Permeability Well
  • Workover of Wells in Partially Pressure-Depleted Reservoirs
  • Workover to Reduces Water Production in Oil and Gas Wells
  • Workover to Reduces Gas Production in Oil Wells
  • Workover for Sand Control
  • Workover to Repair Mechanical Failure
  • Workover to Change Zones or Reservoirs
  • Workover to Multicomplete
  • Workover to Increase Production in Well Producing High Viscosity (Low Gravity) Oil
  • Workover Economics

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Tahun Training Pengelolaan lapangan Mature, Tehnik & Strategi Meningkatkan Produksi tahun 2024:

  • 15-17 Mei 2024 Yogyakarta
  • 12-14 Juni 2024 Jakarta
  • 10-12 Juli 2024 Bali
  • 14-16 Agustus 2024 Bogor
  • 11-13 September 2024 Surabaya
  • 09-11 Oktober 2024 Bandung
  • 13-15 November 2024 Yogyakarta
  • 11-13 Desember 2024 Jakarta

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 10.500.000,-/peserta (Jakarta)
  • Rp. 10.500.000-/peserta (Bandung)
  • Rp. 11.500.000,-/peserta (Yogyakarta)
  • Rp. 13.000.000,-/peserta (Bali)
  • Rp. 13.750.000,-/peserta (Lombok)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Butuh bantuan! Klik disini

Kami siap membantu, silahkan berkomunikasi langsung dengan Tim Kami yang sedang online saat ini. Jika jaringan sedang sibuk, mungkin karena sedang melayani pelanggan lain. Untuk respon cepat silahkan kirim email ke: [email protected] untuk pelayanan via Help Desk

Customer Support

Mei Dwi - Head Office

Online

Customer Support

Umu Hanifatul - Head Office

Online

Customer Support

Eva Arlinda - Head Office

Online

Customer Support

Andini Eryani - Head Office

Online

Mei Dwi - Head OfficeCustomer Support

Hi, Ada yang Bisa saya bantu pak/bu? 00.00

Umu Hanifatul - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Eva Arlinda - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Andini Eryani - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00