Tag: Training Oil and Gas bandung

Training Integrated Reservoir Modeling

Petroleum·

LATAR BELAKANG :

Setelah menyelesaikan training  ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan reservoir minyak, gas dan pengembangan pelaksanaan optimisasi produksi  untuk meningkatkan kinerja produksi sumuran dan lapangan.
  • Melakukan diagnosis sederhana dan memengerti pelaksanaan perhitungan cadangan serta peramalan kinerja reservoir minyak dan gas bumi.
  • Membuat analisis sederhana terhadap data fluida dan batuan reservoir untuk perhitungan dan peramalan kinerja dan merencanakan pengembanganya. .
  • Mempergunakan pengetahuan optimisasi untuk aplikasi dalam cara peningkatan perolehan reservoir minyak bumi, beserta dasar-dasar resrvoir modeling dengan mempergunakan suatu simulator reservoir.

PRE-REQUISITE :

Latar belakang  : Operator, Senior Operator, Junior Engineering, Engineer.

MATERI TRAINING :

Introduction

  • Objectives
  • Units and Convertion Factor
  • Basic Definitions
  • Recovery Phases

Rock Properties

  • Basic Rock Properties
  • Relative Permeability
  • Capillary Pressure

Key Geologic Data

  • Reliable Geologic Models
  • Shale and Clay
  • Heterogeneity and Anisotropy
  • Natural Fracture

Fluid Properties

  • Basic Fluid Properties
  • Reliability of Fluid Properties
  • Types of Oil and Gas Reservoir

Reservoir Volumetric and Recovery Factors

  • Original Oil in Place
  • Definition of Recovery Factor
  • Mobility Ratio in Displacement

Fluid Flow Concept in Oil and Gas Reservoirs

  • Natural of Reservoir Flow
  • Fluid Flow for Steady State System
  • Fluid Flow for Transient Flow
  • Addditional Equations in Reservoir Flow

Some Applications of Fluid Flow Equations

  • Productivity Index
  • Well Test Analysis
  • Water Influx From Aquifers
  • Frontal Advance Theory

Material Balance for Various Reservoir Types

  • Natural Drive Mechanism
  • Material Balance Equations for Oil and Gas Reservoirs

Reservoir Performance in Primary Recovery

  • Performance Prediction Using Material Balance Equations
  • Performance Prediction from Decline Curve Analysis
  • Statistical Methods for Performance Predictions

Reservoir Simulation

  • General Concept
  • Selecting Simulation Elements and Simulation Grids
  • Simulation Input Data
  • Elements of Simulation Study
  • Mechanism of Reservoir Modeling Using Simulator

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641, 0821 3874 5980

Email: info@bmdstreet.com

Website: https://bmdstreet.co.id

Jadwal Training Integrated Reservoir Modeling 2025:

  • 08-10 Januari 2025 Malang
  • 05-07 Februari 2025 Bogor
  • 05-07 Maret 2025 Surabaya
  • 02-04 April 2025 Bandung
  • 07-09 Mei 2025 Medan
  • 03-05 Juni 2025 Jakarta
  • 02-04 Juli 2025 Bali
  • 06-08 Agustus 2025 Bogor
  • 02-04 September 2025 Surabaya
  • 01-03 Oktober 2025 Bandung
  • 05-07 November 2025 Yogyakarta
  • 03-05 Desember 2025 Jakarta

INVESTASI (TIDAK TERMASUK BIAYA AKOMODASI & PENGINAPAN) :

Online Class

  • Rp 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • Rp. 12.000.000,-/peserta (Jakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 12.000.000-/peserta (Bandung) (Harga belum termasuk pajak dan promo)
  • Rp. 13.100.000,-/peserta (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 15.300.000,-/peserta (Bali) (Harga belum termasuk pajak dan promo)
  • Rp. 16.100.000,-/peserta (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/peserta (Malaysia) (Harga belum termasuk pajak dan promo)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Advance Scale Prevention and Water Technology

Petroleum, Processing, Production System & Design·

LATAR BELAKANG :

Setelah menyelesaikan Training Advance Scale Prevention and Water Technology  ini diharapkan peserta dapat :

  • Memahami dasar-dasar pembentukan scale dan penggunaannya untuk keperluan operasi produksi-injeksi reservoir minyak, gas dan reservoir panas bumi.
  • Memahami cara-cara pengambilan sample air di lapangan dan cara analisis kandungan kimianya pada sumur-sumur produksi minyak, gas dan panas bumi.
  • Memahami prinsip-prinsip dasar penggunaan peralatan untuk  pelaksanaan  pengujian sifat-sifat air di lapangan minyak, gas dan panas bumi.
  • Melakukan diagnosis sederhana dan melakukan penyelesaian persoalan yang berkaitan dengan pembentukan scale oleh air formasi yang turut terproduksi ke permukaan.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk berbagai keperluan industri dan pelaksanaan injeksi air di lapangan dan cara penanganan kandungan mikrobiologisnya.
  • Mempergunakan pengetahuan spesifik untuk keperluan penanganan scale air formasi termasuk  scale clean out, scale squeeze dan acidizing.

PRE-REQUISITE : Latar belakang  : Operator, Senior Operator, Engineer, Non Engineer MATERI TRAINING  : Kimia Air Formasi Proses pembentukan Scale dan Faktor Penyebabnya

  • Scale Kalsium Karbonat
  • Scale Kalsium Sulfat
  • Scale BariumSulfat
  • Scale Besi
  • Field Analysis

Teknik Analisis Air Formasi Identifiksi Jenis Scale Penentuan Kecenderungan Pembentukan Scale

  • Kalsium Karbonat
  • Kalsium Sulfat dan Barium Sulfat

Penanggulangan Masalah Scale

  • Menghilangkan Scale
  • Secara Mekanis
  • Secara Kimiawi
  • Pencegahan Scale
  • Secara Non Kimiawi
  • Secara Kimiawi

Penanggulangan Scale di Lapangan

  • Metoda Scale Clean Out
  • Metoda Scale Squeeze

Teknik Pengasaman

  • Jenis Asam
  • Jenis Aditive
  • Stimulasi Batuan Karbonat
  • Perencanaan Stimulasi Asam
  • Kriteria Keberhasilan

The Chemistry of Water

  • Chemical and Physical Properties
  • Sampling
  • Quantitative Analysis
  • Procedures
  • Expression of Results
  • Water Patterns
  • Reports
  • Analysis Techniques
  • Suspended SolidsPartical Size Analysis
  • Turbidity
  • Field Analysis

Water Formed Scales

  • Why Scales Form
  • Common Scales
  • Predicting Scale Formation
  • Water Compatibility
  • Scale Prevention
  • Alteration of Water Properties
  • Scale Control Chemicals
  • Scale Removal Methods
  • Scale Analysis
  • Scale Removal Chemicals
  • Removal from Surface Lines
  • Downhole Cleanout

Corrosion in Water Injection and Disposal System

  • Theory
  • Effect of  Metal Composition
  • Effect of Water Composition
  • Physical Variables
  • Form of Corrosion
  • Corrosion Control Methods
  • Approaches
  • Inhibitors
  • Coatings and Linings
  • Cathodic Protection
  • NonmetalicTubular Goods
  • Removal of Corrosion Gases
  • Oxygen Exclusion
  • Design Consideration
  • Corrosion Monitoring Techniques

Water Treatment Microbiology

  • Terminology
  • Bacteria Which Causes Problems
  • Culturing, Indentifying and Counting Bacteria
  • Miscellaneous Organism
  • Chlorination

Waterflood Injection System

  • Water Source Selection
  • Type of  Treating Systems
  • Water Treating Equipment
  • Suspended Solids Removal
  • Suspended Oil Removal
  • Guidelines to System Design
  • Waterflood Inspection and System Analysis

Water Disposal System

  • Pollution – Incentive for Subsurface Disposal
  • Brines and Gas Processing Plant Waters
  • Plant Water Disposal

DURASI 3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

081382807230, 0812 8931 1641, 0821 3874 5980

Email: info@bmdstreet.com

Website: https://bmdstreet.co.id

SCHEDULE TRAINING ADVANCE SCALE PREVENTION and WATER TECHNOLOGY TAHUN 2025 :

  • 13-15 Januari 2025 Jakarta
  • 10-12 Februari 2025 Yogyakarta
  • 10-12 Maret 2025 Bandung
  • 13-15 Mei 2025 Bogor
  • 09-11 Juni 2025 Bali
  • 07-09 Juli 2025 Jakarta
  • 11-13 Agustus 2025 Yogyakarta
  • 08-10 September 2025 Bandung
  • 06-08 Oktober 2025 Surabaya
  • 10-12 November 2025 Bogor
  • 08-10 Desember 2025 Malang

INVESTATION (TIDAK TERMASUK AKOMODASI DAN PENGINAPAN):

Online Class

  • Rp.6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • Rp. 12.000.000,-/peserta (Jakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 12.000.000-/peserta (Bandung) (Harga belum termasuk pajak dan promo)
  • Rp. 13.100.000,-/peserta (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 15.300.000,-/peserta (Bali) (Harga belum termasuk pajak dan promo)
  • Rp. 16.100.000,-/peserta (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/peserta (Malaysia) (Harga belum termasuk pajak dan promo)

REFERENSI

  • PT. Chevron Pacific Indonesia
  • Chevron Indonesia Company

TESTIMONIAL

  • “Materi training bagus, trainernya mantap dan metode penyajiannya sangat bervariasi antara video dengan slide show sehingga kami lebih mudah untuk memahaminya dan permasalahan yang kami hadapi bisa terselesaikan” Dirgahayu Yonisoslita – Lab Analyst PT. Chevron Pacific Indonesia
  • “Memberi wawasan yang lebih luas mengenai scale dan keterkaitannya dengan proses produksi, sehingga sangat membantu untuk memahami sample scale yang di analisa di laboratorium” Tyas Kuswardani – Specialist TS Laboratory Minas PT. Chevron Pacific Indonesia
  • “Materi training & topik yang disampaikan sangat baik, berhubungan dengan pekerjaan sehari-hari. materi yang disampaikan oleh instruktur sangat mendukung pada problem solving di pekerjaan.” Mohammad Anom Guritno – Lab Analyst Chevron Indonesia Company

Advanced Scale-BMD

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Gas Processing Calculation

Petroleum·

OBJECTIVES :

After participate in this training , the participants will be able and capable to :

  • Understand the basic concept of gas handling processes and operation calculation, and how to operate this technology in field application.
  • Calculation and diagnostic of gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze and calculation the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals calculation of microscopic and macroscopic aspects and phenomena of gas  processes calculation and operation.

AUDIENCE:

No specified  (Operator/ Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

  • Introduction to Gas Process and Operation
  • Gas Properties calculation
  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservoir Performance calculatrion

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System and calculation

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Gas Compression calculation

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis and calculation

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir calculation

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems and calculation

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition

Gas Processing design calculation

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641, 0821 3874 5980

Email: info@bmdstreet.com

Website: https://bmdstreet.co.id

Schedule Training Gas Processing Calculation year 2025:

  • 22-24 Januari 2025 Bogor
  • 26-28 Februari 2025 Bali
  • 26-28 Maret 2025 Surabaya
  • 23-25 April 2025 Medan
  • 26-28 Mei 2025 Bandung
  • 24-26 Juni 2025 Yogyakarta
  • 23-25 Juli 2025 Jakarta
  • 27-29Agustus 2025 Bali
  • 24-26 September 2025 Bogor
  • 22-24 Oktober 2025 Surabaya
  • 26-28 November 2025 Bandung
  • 29-31 Desember 2025 Medan

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • IDR. 12.000.000,-/participant (Jakarta) (Harga belum termasuk pajak dan promo)
  • IDR. 12.000.000-/participant (Bandung) (Harga belum termasuk pajak dan promo)
  • IDR. 13.100.000,-/participant (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • IDR. 15.300.000,-/participant (Bali) (Harga belum termasuk pajak dan promo)
  • IDR. 16.100.000,-/participant (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/participant (Malaysia) (Harga belum termasuk pajak dan promo)

Available on request for time, place and facilities call us for more information

Training Formation Evaluation Intermediate

Petroleum·

LATAR BELAKANG :

Setelah menyelesaikan training ini diharapkan peserta dapat :

  • Memahami prinsip dasar operasi dan interpretasi tes sumur
  • Melakukan interpretasi data tes sumur
  • Membuat perencanaan atau desain susau tes sumur
  • Membuat atau menggunakan program-program kecil yang membantu dalam interpretasi data tes sumur

PESERTA YANG DIREKOMENDASIKAN:

Field Superintendent, Sr. Operator, Jr. Operator, Jr. Engineer,NonEngineer

PRE-REQUISITE

  • Mempunyai pengetahuan dasar teknik perminyakan
  • Mempunyai pengetahuan dasar teknik reservoir dan produksi
  • Mempunyai pengalaman lapangan dalam bidang produksi dan reservoir

MATERI TRAINING :

Pengenalan Teknik Perminyakan

Dasar-Dasar Tes Sumur

  • Prinsip Dasar Tes Sumur
  • Aliran Fluida Dalam Media Berpori
  • Macam-Macam Tes Sumur

Pressure Drawdown Test

  • Analisis Pressure Drawdown Pada Periode Transien
  • Analisis Pressure Drawdown Pada Periode Transien Lanjut
  • AnalisisPressureDrawdownPadaPeriodeSemi-SteadyState

Pressure Buildup Test

  • Prinsip Superposisi
  • Pressure Buildup Ideal
  • Actual Buildup Case
  • Lamanya Pengaruh Wellbore Storage
  • Penentuan Tekanan Rata-Rata
  • Pressure Buildup Untuk Sistem Lebih Dari Satu Fasa
  • Analisis Pressure Buildup Dibawah Pengaruh Redistribusi Fasa Pada Lubang Bor

Multi Rate Test

  • Persamaan Dasar Untuk Multiple Rate Test
  • Two Rate Flow Test
  • Deliverability Test
  • Variable Injection Rate Test

Multiple Well Test

  • Interference Test
  • Interference Test Pada Reservoir Terbatas (Bounded)
  • Pulse Testing
  • Analisis Pulse Test Dengan Metode Stegemeier

Analisis Tes Sumur Dengan Menggunakan Type Curve

  • Prinsip Analisis Type Curve
  • Ramey’s Type Curve dan McKinley Type Curve

Tes Sumur Sumur Gas

  • Sifat-Sifat Gas
  • Analisis Tes Sumur Pada Sumur Gas

Injection Well Testing

  • Injectivity Analysis
  • Falloff Test Analysis
  • Step-Rate Testing

Drill Stem Testing

  • Analisis DST

Tes Sumur Untuk Reservoir Rekah Buatan

  • Transien Tekanan Pada Hydraulically Vertical Fractured Reservoir
  • Efek Skin, Wellbore Storage dan Geometri Rekahan Terhadap Respon Tekanan
  • Finite Fracture Conductivity
  • Massive Hydraulic Fracturing dan Pengujian Pada Tekanan Konstan

Tes Sumur Untuk Reservoir Rekah Alami

  • Kelakuan Transien Tekanan Pada Reservoir Rekah Alami
  • Efek Incomplete Test
  • Pendekatan Gradient Flow Model
  • Analisis Transien Tekanan Pada Reservoir Rekah Alami Dibawah Pengaruh Alirab Spherical

Interpretasi Data Tes Sumur Horizontal

  • Analisis Transien Tekanan Sumur Horizontal Secara Grafis
  • Analisis Transien Tekanan Sumur Horizontal Dengan Type Curve Matching

Well Sounder

  • Analisis Data Well Sounder

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641, 0821 3874 5980

Email: info@bmdstreet.com

Website: https://bmdstreet.co.id

Jadwal Training Formation Evaluation Intermediate tahun 2025:

  • 08-10 Januari 2025 Malang
  • 05-07 Februari 2025 Bogor
  • 05-07 Maret 2025 Surabaya
  • 02-04 April 2025 Bandung
  • 07-09 Mei 2025 Medan
  • 03-05 Juni 2025 Jakarta
  • 02-04 Juli 2025 Bali
  • 06-08 Agustus 2025 Bogor
  • 02-04 September 2025 Surabaya
  • 01-03 Oktober 2025 Bandung
  • 05-07 November 2025 Yogyakarta
  • 03-05 Desember 2025 Jakarta

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • Rp. 12.000.000,-/peserta (Jakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 12.000.000-/peserta (Bandung) (Harga belum termasuk pajak dan promo)
  • Rp. 13.100.000,-/peserta (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 15.300.000,-/peserta (Bali) (Harga belum termasuk pajak dan promo)
  • Rp. 16.100.000,-/peserta (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/peserta (Malaysia) (Harga belum termasuk pajak dan promo)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Enhanced Oil Recovery (EOR) Technology To Boost Production

Training Enhanced Oil Recovery (EOR) Technology To Boost Production

foto web, Petroleum·

INTRODUCTION

Training Enhanced Oil Recovery (EOR)– Oil recovery operations traditionally have been subdivided into three stages: primary, secondary and tertiary. These stages described the production from a reservoir in a chronological sense. Primary production resulted from the displacement energy naturally existing in reservoir. Secondary recovery usually implemented after primary production declined, the term secondary recovery is now almost synonimous with waterflooding. Tertiary recovery was that obtained after waterflooding (or whatever secondary process used) it’s used miscible gases, chemicals and/or thermal energy to displace additional oil. When the waterflooding stage might be reasonably be bypassed the term tertiary recovery fell into disfavor in petroleum engineering term and the designation of enhaced oil recovery (EOR) become accepted to replace the term of secondary and tertiary recovery.

In describing the different EOR processes (Waterflooding, Miscible Displacement, Chemical Flooding: Micellar/Polymer, Surfactant, Alkaline and finally Thermal Recovery Processes, it will be focused on the fundamental concepts of each processes and it will also present methods of predicting oil recovery when the processes are applied to oil reservoir. Many methods are available to calculate displacement performance, ranging from simple models based on volumetric sweep to sophisticated method. Thus, with the proper understanding of all enhanced oil recovery processes will reduce the entire cost of the plant and production operation of EOR system.

This five-day training will provide a comprehensive knowledge and understanding of different EOR processes (Waterflooding, Miscible Displacement, Chemical Flooding: Micellar/Polymer, Surfactant, Alkaline) and Thermal Recovery Processes with various fields example.

OBJECTIVES

  • Refresh the knowledge of the participants on reservoir engineering and enhanced oil recovery (EOR) processes.
  • Understand the fundamental concepts of each EOR process and ability to calculate and to predict the EOR performance.
  • Learn the simple EOR models based on volumetric sweep model to sophisticated method of calculation.
  • Enhance the knowledge on EOR processes (Waterflooding, Miscible Displacement, Chemical Flooding: Micellar/Polymer, Surfactant, Alkaline) and Thermal Recovery Processes with various fields example.
  • Gain additional knowledge on EOR processes (Waterflooding, Miscible Displacement, Chemical Flooding: Micellar/Polymer, Surfactant, Alkaline) and Thermal Recovery Processes. Knowledge sharing among the participants and instructors

FEATURING THE FOLLOWING SUBEJCTS

Introduction to EOR Processes

  • Definition of EOR
  • Target Oil Resources for EOR Processes
  • Idealized Characteristics of an EOR Processes
  • Potential of Different Processes
  • Screening Criteria for Process Applicability

Microscopic Displacement of Fluids in a Reservoir

  • Capillary Forces
  • Viscous Forces
  • Phase Trapping
  • Mobilization of Trapped Phases-Alteration of Viscous/Capillary Force Ratio

Displacement in Linear System

  • Waterflood Performance-Frontal Advanced Equation
  • Viscous Waterflood in a Linear System
  • Chemical Flooding in Linear System
  • Application of Chemical Flooding Model
  • Displacement of  Slugs
  • Dispertion During Niscible Displacement
  • Viscous Fingering-Instability in Displacement Fronts

Macroscopic Displacement of Fluids in a Reservoir

  • Volumetric Displacement Efficiency and Material Ballance
  • Definition and Discussion of Mobility Ratio
  • Areal Displacement Efficiency
  • Vertical Displacement Efficiency
  • Volumetric Displacement Efficiency

Mobility-Control Processes

  • Process Description
  • Physical and Chemical Characteristics of Polymer
  • Flow Polymer Through Porous Media
  • In-Situ Permeability Modification
  • Mobility Control to maintain Chemical Slug Integrity
  • Foam as EOR Agent
  • WAG Process

Miscible Displacement Processes

  • General Description of Miscible Displecement
  • Principles of Phase Behavior in Miscible Displacement
  • FCM anc MCM Processes
  • Measurement and Prediction of MMP or MME in Multiple Contact Prosess
  • Fluid Properties in Miscible Displacement
  • Miscible Displacement Modeling

Chemical Flooding

  • Description of Micellar/Polymer Process
  • Surfactants
  • Phase Behavior of Microemultion and IFT
  • Variables Affecting Phase Behavior and IFT
  • Viscosity and Density of Microemultion
  • Displacement Mechanism
  • Modeling, design Procedure and Criteria of Chemical Flood Displacement
  • Alkaline Flooding

Thermal Recovery Processes

  • Heat Losses During Steam Injection
  • Cyclic Steam Stimulation
  • Reservoir Heating by Steam Injection
  • Estimating of Oil Recovery From Steam Drive
  • In-Situ Combustion
  • Comparison of Steam and In-Situ Combustion

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641, 0821 3874 5980

Email: info@bmdstreet.com

Website: https://bmdstreet.co.id

Schedule Training Enhanced Oil Recovery Technology To Boost Production year 2025 :

  • 22-24 Januari 2025 Bogor
  • 26-28 Februari 2025 Bali
  • 26-28 Maret 2025 Surabaya
  • 23-25 April 2025 Medan
  • 26-28 Mei 2025 Bandung
  • 24-26 Juni 2025 Yogyakarta
  • 23-25 Juli 2025 Jakarta
  • 27-29Agustus 2025 Bali
  • 24-26 September 2025 Bogor
  • 22-24 Oktober 2025 Surabaya
  • 26-28 November 2025 Bandung

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • IDR. 12.000.000,-/participant (Jakarta) (Harga belum termasuk pajak dan promo)
  • IDR. 12.000.000-/participant (Bandung) (Harga belum termasuk pajak dan promo)
  • IDR. 13.100.000,-/participant (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • IDR. 15.300.000,-/participant (Bali) (Harga belum termasuk pajak dan promo)
  • IDR. 16.100.000,-/participant (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/participant (Malaysia) (Harga belum termasuk pajak dan promo)

Available on request for time, place and facilities call us for more information

Training EOR 28-30 oktober 2013 Bandung

Training Drilling Main Equipment Operations For drilling Crew

Training Drilling Main Equipment Operations For drilling Crew

Petroleum·

TARGET & TUJUAN TRAINING :

Setelah menyelesaikan training ini diharapkan peserta dapat :

  • Mengetahui dan memahami tentang berbagai peralatan pemboran yang dioperasikan di darat maupun laut termasuk juga laut dalam.
  • Memahami prinsip-prinsip dasar dan berbagai perhitungan sederhana untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan  perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian dan melakukan pemboran  suatu sumur minyak, gas atau panas bumi.
  • Membuat analisis sederhana terhadap data eksplorasi sumuran minyak, gas dan panas bumi , kemudian mampu melakukan perancangan global pemboran  kinerja dan merencanakan pengembangannya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perencanaan lumpur pemboran, semen, hidrolika, well control.
  • Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.

PESERTA YANG DIREKOMENDASIKAN :

Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

MATERI TRAINING : 

Introduction

  • General
  • Personal at rig site
  • Miscellaneous

Rotary Drilling Rig

  • Rig Power System
  • Hoisting System
  • Derrick
  • Block and Tackle
  • Drawworks
  • Rig Selection
  • Circulation (Mud)
  • The rotary (Swivel, Kelly, Rotary Drive)
  • Drilling Cost Analysis (Drilling Costs, Drilling Time, Tripping Time,

Geomechanics

  • Geology Prediction
  • Pore pressure Prediction
  • Hydrostatic Pressure
  • Fracture Gradient Prediction
  • Interpretation of Field Data
  • Mud Weight Planning
  • Examples

Drilling Hydraulics

  • Hydrostatic Pressure Inside the Wellbore
  •  Types of Fluid Flow
  • Rheological Classification of Fluids
  • Laminar Flow in Pipes and Annuli
  • Turbulent Flow in Pipes and Annuli
  • Pressure Drop Across Surface Connections
  • Pressure Drop Across Bit
  • Initiating Circulation
  • Optimization of Bit Hydraulics
  • Particle Slip Velocity
  • Surge and Swab Pressure
  • Examples

Drilling Bits

  • Drill Bit Types (Roller Cone,  BitFixed Cutter Bit, Coring  )             
  • Drill Bit Classification (Roller Bit Classification, Drag Bit Classification, 
  • Drill Bit Selection and Evaluation (ToothWear, BearingWear, GaugeWear)
  • Factors that Affect the Rate Of Penetration (Bit Type,  Formation Characteristics, Drilling Fluid Properties, Operating Conditions, BitWear, Bit Hydraulics, Examples)

Drillstring Design

  • Drill Pipe Classification
  • Calculation of Neutral Point
  • Drillstring Design Calculations ( Tension, Collapse,  Biaxial Loading, Shock Loading, Torsion)
  • Drillpipe Bending resulting from Tonging Operations
  • Selecting Drill Collar Weights
  • Stretch of Drillpipe
  • Critical Rotary Speeds
  • BottomHole Assembly Design
  • Placement of Stabilizers and Reamers (Building Assemblies,  Holding Assemblies, Dropping Assemblies, WOB Increase, 
  • Dogleg Severity Analysis
  • Examples

Drilling Fluid

  • Functions of Drilling Mud
  • Types of Drilling Mud (Water-base Muds, Oil-base Muds, Mud Calculations, Recommended Mud Flow Properties,  Examples)

Casing Design 207

  • Casing Types
  • Conductor Casing (Surface Casing, Intermediate Casing, Production Casing, Liners)
  • Casing Setting Depths
  • Casing Connections
  • API Casing Performance Properties
  • General Casing Design Criteria
  • Graphical Method for Casing Design
  • Maximum Load Casing Design for Intermediate Casing
  • Casing Centralizer Spacings
  • Stretch in Casing
  • Examples

Directional Drilling and Deviation Control 251

  • Mayor Types ofWellbore Trajectories
  • Trajectory Calculation
  • Calculating the Survey of a Well (Average angle method, Radius of curvaturemethod, Minimum Curvature Method)
  • Dogleg Severity Calculations
  • Deflection Tools and Techniques (Natural Formation Effects, Hydraulic Method (Jetting), Mechanical Methods)
  • 9.6 While Drilling Techniques (Measurement While Drilling, Logging While Drilling, Data Transfer)
  • Examples

Borehole Problems

  • Differential Pipe Sticking
  • Free Point Calculation
  • Freeing Differentially Stuck Pipe (Spotting Organic Fluids, Hydrostatic Pressure Reduction, Backoff Operations, 
  • Lost Circulation Control
  • Keyseats
  • Examples

Kick Control and Blowout Prevention

  • Blowout Preventer (Rampreventers, Annular preventers)
  • Well Control Operations
  • Length and Density of Kick
  • Kick Tolerance and KillMudWeight
  • Pump Pressure Schedules for Well Control Operations
  • Kick Removal – TwoMethods (Wait-and-weightmethod, Driller’s method)
  • Equations Required to PerformDynamic or Polymer Kill
  • Examples

Cementing

  • Functions of Cement
  • Properties of Cement Slurry (Physical Properties)
  • Cement Additives (Extenders, Accelerators, Retarders, WeightingMaterial, Fluid Loss Material, Dispersants)
  • Primary Cementing
  • Liner Cementing
  • Squeeze Cementing
  • Plugback Cementing
  • Examples

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft copy dan Hard Copy), Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di hotel berbintang

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641, 0821 3874 5980

Email: info@bmdstreet.com

Website: https://bmdstreet.co.id

Jadwal Training Drilling Main Equipment Operations For drilling Crew tahun 2025 :

  • 20-22 Januari 2025 Jakarta
  • 17-19 Februari 2025 Yogyakarta
  • 17-19 Maret 2025 Bandung
  • 14-16 April 2025 Surabaya
  • 19-21 Mei 2025 Bogor
  • 16-18 Juni 2025 Bali
  • 14-16 Juli 2025 Jakarta
  • 18-20 Agustus 2025 Bandung
  • 15-17 September 2025 Yogyakarta
  • 13-15 Oktober 2025 Bandung
  • 17-19 November 2025 Surabaya
  • 15-17 Desember 2025 Bogor

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • Rp. 12.000.000,-/peserta (Jakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 12.000.000-/peserta (Bandung) (Harga belum termasuk pajak dan promo)
  • Rp. 13.100.000,-/peserta (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 15.300.000,-/peserta (Bali) (Harga belum termasuk pajak dan promo)
  • Rp. 16.100.000,-/peserta (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/peserta (Malaysia) (Harga belum termasuk pajak dan promo)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Gas Handling, Conditioning and Processing

Petroleum·

OBJECTIVES :

After participate in this course, the participants will be able and capable to :

  • Understand the basic concept of gas handling processes and operation, and how to operate this technology in field application.
  • Diagnostic of gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of gas handling processes and operation.

AUDIENCE:

No specified  (Operator/ Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Introduction to Gas Process and Operation

Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservoir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Gas Compression

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition

Gas Processing and Conditioning

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641, 0821 3874 5980

Email: info@bmdstreet.com

Website: https://bmdstreet.co.id

JADWAL TRAINING GAS HANDLING,CONDITIONING DAN PROCSESSING TAHUN 2025:

  • 20-22 Januari 2025 Jakarta
  • 24-26 Februari 2025 Bogor
  • 24-26 Maret 2025 Yogyakarta
  • 21-23 April 2025 Medan
  • 26-28 Mei 2025 Bali
  • 23-25 Juni 2025 Surabaya
  • 21-23 Juli 2025 Bogor
  • 25-27 Agustus 2025 Bali
  • 22-24 September 2025 Jakarta
  • 20-22 Oktober 2025 Yogyakarta
  • 24-26 November 2025 Bandung
  • 22-24 Desember 2025 Bali

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • IDR. 12.000.000,-/participant (Jakarta) (Harga belum termasuk pajak dan promo)
  • IDR. 12.000.000-/participant (Bandung) (Harga belum termasuk pajak dan promo)
  • IDR. 13.100.000,-/participant (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • IDR. 15.300.000,-/participant (Bali) (Harga belum termasuk pajak dan promo)
  • IDR. 16.100.000,-/participant (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/participant (Malaysia) (Harga belum termasuk pajak dan promo)

Available on request for time, place and facilities call us for more information

Training Blowout Prevention and Well Control

Petroleum·

LATAR BELAKANG :

  • Merupakan salah satu masalah lubang sumur di operasi pemboran
  • Menyebabkan timbulnya biaya ekstra yang cukup besar
  • Berpotensi menyebabkan hilangnya sebagian atau semua fasilitas pemboran di lapangan karena kick dan  blow out yang tidak terkontrol
  • Menunda waktu produksi sumur (POP)

SASARAN :

  • Mengetahui gejala kejadian kick dan blow out.
  • Mengetahui kerugian akibat kick yang tidak terkontrol atau blow out.
  • Mengetahui usaha pencegahan terjadinya blow out.
  • Mengetahui cara mengidentifikasi mekanisme kick yang terjadi.
  • Mengetahui kronologi terjadinya kick dan blow out dan cara penanggulangannya dengan Well Control.

PESERTA YANG DIREKOMENDASIKAN :

Latar belakang  : Operator/ Sr. Operator/ Jr. Engineer/Non Engineer

MATERI TRAINING :

Well Control Introduction

  • Introduction to course
  • Basic Concepts
  •  Liquid Hydrostatics

Gas Behavior and Hydrostatics

  • Ideal Gases
  • Effect of Temperature
  • Real Gases
  • Critical Temperature & Pressure
  • Pseudo-Critical Temp. and Press.
  • Gas Compressibility
  • Gas Migration

Kick and Gas Migration

  • Density of real gasses
  • Equivalent Mud Weight (EMW)
  • Wellbore pressure before and after kick
  • Gas migration rate – first order approx.
  • Gas migration rate – w/mud compressibility

Gas Solubility

  • Solubility of Hydrocarbon Gasses in Oil
  • Solubility of Non-Hydrocarbon Gasses in Oil
  • Solution Volume Factors
  • Oil Mud  Recommendations

Pore Pressure Prediction

  • Mud Weight and Pore Pressure
  • Mud Weight and Fracture Gradient
  • Normal Pore Pressure
  • ubnormal Pore Pressure
  • Abnormal Pore Pressure
  • Origins of Pore Pressure
  • Bulk Density and Porosity vs. Depth

Drilling Rate and Pore Pressure

  • Forces on Subsurface Rock
  • d-exponent
  • dc-exponent
  • Rehm and McClendon
  • Zamora
  • Comb’s Method
  • Bourgoyne and Young’s Method

Other Indicators of Abnormal Pore Pressure

  • Moore’s Equation – Drilling rate
  • Gas in the Drilling Fluid
  • Rock Sample Characteristics
  • Use of Surge and Swab Pressure to determine Overbalance
  • Changes in Drilling Fluid Properties
  • Temperature Indications
  • Hole Conditions

Logging While Drilling

  • Sonic Travel Time
  • Resistivity and Conductivity
  • Eaton’s Equations (R, C, Dt, dc)
  • Natural Gamma Ray

Fracture Gradients 1

  • Allowable Wellbore Pressures
  • Rock Mechanics Principles
  • Hooke’s Law, Young’s Mudulus, Poisson’s Ratio
  • Volumetric Strain, Bulk Modulus, Compressibility
  • Triaxial Tests
  • Rock Mechanics Principles (con’t.)
  • Rock Properties from Sound Speed in Rocks’
  • Mohr’s Circle
  • Mohr-Coulomb Failure Criteria

Fracture Gradients 2

  • Radial and Tangential Stresses near the Wellbore
  • Stresses in Rock near Wellbore
  • Effect of Anisotropic Stresses
  • Onshore vs. Offshore Fracture Gradients
  • Fracture Gradients in Inclined Wellbores
  • Oil Based and Water Based Drilling Fluids

Fracture Gradients Determination

  • Hubbert and Willis
  • Matthews and Kelly
  • Ben Eaton
  • Christman
  • Prentice
  • Leak-Off Test (experimental)

Kick Detection and Control

  • Primary and Secondary Well Control
  • What Constitutes a Kick
  • Why Kicks Occur
  • Kick Detection Methods
  • Shut-in Procedures
  • Soft and Hard Shut-in
  • Water Hammer

Off Bottom Kick

  • Slugging of drillpipe
  • Hole fill during trips
  • Surge and Swab pressures
  • Kick detection during trips
  • Shut-In Procedures
  • Blowout Case History

Control Pressures and Circulation Kill Techniques 1

  • Shut-In Pressures
  • Weighting Up the Mud
  • Driller’s Method
  • Wait & Weight Method

 Control Pressures and Circulation Kill Techniques 2

  • Wait & Weight Method
  • Concurrent Method
  • Annulus Pressure Profiles
  • Kicks in Oil-Based Mud

Secondary Well Control Complications

  • Volumetric Well Control
  • Lubrication
  • Complications During Conventional Kill
  • Techniques to Reduce Annular Friction

Special Well Control Applications

  • Underbalanced Drilling
  • Well Control in Unconventional Hole Programs
  • Casing and Cementing Operations

Equipments

  • High Pressure Equipment
  • Control System Equipment and Design
  • BOP Inspection and Test Considerations
  • Low-Pressure Equipment
  • Equipment Arrangement: Design and Philosophy
  • Casing
  • Casing Heads and Spools
  • Stack Equipment
  • Choke and Kill Line Equipment
  • Drillstem Control Equipment

  Offshore Operations

  • Equipment Used in Floating Drilling
  • Operational Considerations in Floating Well Control
  • Shallow Gas Hazards
  • Trends in Deepwater Drilling

Investation (Not Include Hotel Acomodation) :

Online Class

Rp.6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • Rp. 12.000.000,-/peserta (Jakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 12.000.000-/peserta (Bandung) (Harga belum termasuk pajak dan promo)
  • Rp. 13.100.000,-/peserta (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 15.300.000,-/peserta (Bali) (Harga belum termasuk pajak dan promo)
  • Rp. 16.100.000,-/peserta (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/peserta (Malaysia) (Harga belum termasuk pajak dan promo)

Available on request for time, place and facilities call us for more information

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft Copy dan Hard Copy), Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di hotel berbintang

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

081382807230, 0812 8931 1641

Email: info@bmdstreet.com

Website: https://bmdstreet.co.id

Jadwal Training Blowout Prevention and Well Control tahun 2025 :

  • 20-22 Januari 2025 Jakarta
  • 24-26 Februari 2025 Bogor
  • 24-26 Maret 2025 Yogyakarta
  • 21-23 April 2025 Medan
  • 26-28 Mei 2025 Bali
  • 23-25 Juni 2025 Surabaya
  • 21-23 Juli 2025 Bogor
  • 25-27 Agustus 2025 Bali
  • 22-24 September 2025 Jakarta
  • 20-22 Oktober 2025 Yogyakarta
  • 24-26 November 2025 Bandung
  • 22-24 Desember 2025 Bali

Available on request for time, place and facilities call us for more information

Training Surface Production System & Trouble Shooting

Maintenance, Petroleum·

OBJECTIVES :

After participate in thid course, the participants will be abble and cappable to :

  • Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology and trouble shooting in field application.
  • Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes, trouble shooting  and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes and trouble shooting of operation problems.

AUDIENCE:

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Gas Surface Production Operation,  Equipments and Trouble Shooting
Introduction to Gas Handling and Facilities and Trouble Shooting

Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservioir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells
  • Gas Piping System Trouble Shooting,

Gas Compression

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor
  • Gas Compressor Trouble Shooting

Total System Analysis

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods
  • Measurement Problem Trouble Shooting

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  •  Sulfur Deposition
  • Field Operation Proble m Shooting

Gas Processing

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening
  • Gas Proccesing Trouble Shooting

Oil Surface Production Operation and Equipments
Oil Well Surface Production Equipment and Operation

  • Oil Well Equipment
  • -Oil Well Production Operation
  • Well Automatic Safety Device
  •  Oil Well Surface Production Proble Shooting

Oil Gathering System. Manifold and Flowline

  • OilGathring System
  • Manifold e System
  • Flowline Sizing and Design
  • Oil Gathering System Problem Shooting

Crude Oil and Gas Separation

  • Separator and Principle of Separation
  • Design of Separator
  • Oil Dehydration
  • Crude Oil and Gas Separation Problem Shooting

Principles of Measurement

  • Introduction to Measurement
  • Crude Oil Measurement
  • Gas Measurement

Well Test

  • Introduction
  • Responsibility for Test
  • Preparation for Test
  • Types of Well Test
  • Equipment and Procedures
  • Accuracy of Fluid Measurement
  • Problem in Testing
  • Type of Test

Artificial Lift Method

  • Gas Lift
  • Submersible Pump
  • Succker Rod Pump
  • Hydraulic Pump
  • Artificial Lift Problem Shooting

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

081382807230, 0812 8931 1641, 0321 3874 5980

Email: info@bmdstreet.com

Website: https://bmdstreet.co.id

Schedule Surface Production System & Trouble Shooting Year 2025:

  • 06-08 Januari 2025 Jakarta
  • 03-05 Februari 2025 Yogyakarta
  • 03-05 Maret 2025 Bandung
  • 02-04 April 2025 Surabaya
  • 05-07 Mei 2025 Bogor
  • 02-04 Juni 2025 Bali
  • 01-03 Juli 2025 Jakarta
  • 04-06 Agustus 2025 Yogyakarta
  • 01-03 September 2025 Bandung
  • 01-03 Oktober 2025 Surabaya
  • 03-05 November 2025 Bogor
  • 01-03 Desember 2025 Malang

INVESTATION  (NOT INCLUDE HOTEL ACCOMODATION): 

Online Class

  • Rp.6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • IDR. 12.000.000,-/peserta (Jakarta) (Harga belum termasuk pajak dan promo)
  • IDR. 12.000.000-/peserta (Bandung) (Harga belum termasuk pajak dan promo)
  • IDR. 13.100.000,-/peserta (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • IDR. 15.300.000,-/peserta (Bali) (Harga belum termasuk pajak dan promo)
  • IDR. 16.100.000,-/peserta (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/peserta (Malaysia) (Harga belum termasuk pajak dan promo)

Available on request for time, place and facilities call us for more information

Training Reservoir,Well Test,Survellanvance,Production System Processing and Facilities Of Natural Gas

Petroleum·

OBJECTIVES 

After participate in this training , the participants will be able and capable to :

  • Understand the basic concept of gas handling processes and operation, and how to operate this technology in field application.
  • Diagnostic of gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of gas handling processes and operation.

AUDIENCE:

No specified  (Operator/ Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Introduction to Gas Process and Operation

Gas Reservoir Performance

  • Origine of Petroleum
  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • LiquidRemoval from Gas Wells

Gas Compression

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition

Gas Processing and Conditioning

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641, 0821 3874 5980

Email: info@bmdstreet.com

Website: https://bmdstreet.co.id

Schedule Training Reservoir,Well Test,Survellanvance,Production System Processing and Facilities Of Natural Gas yaer 2025:

  • 15-17 Januari 2025 Malang
  • 12-14 Februari 2025 Bogor
  • 12-14 Maret 2025 Surabaya
  • 14-16 Mei 2025 Yogyakarta
  • 11-13 Juni 2025 Jakarta
  • 09-11 Juli 2025 Bali
  • 13-15 Agustus 2025 Bogor
  • 10-12 September 2025 Surabaya
  • 08-10 Oktober 2025 Bandung
  • 12-14 November 2025 Yogyakarta
  • 10-12 Desember 2025 Jakarta

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 6.100.000/peserta (Harga belum termasuk pajak dan promo)

Normal Class

  • Rp. 12.000.000,-/peserta (Jakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 12.000.000-/peserta (Bandung) (Harga belum termasuk pajak dan promo)
  • Rp. 13.100.000,-/peserta (Yogyakarta) (Harga belum termasuk pajak dan promo)
  • Rp. 15.300.000,-/peserta (Bali) (Harga belum termasuk pajak dan promo)
  • Rp. 16.100.000,-/peserta (Lombok) (Harga belum termasuk pajak dan promo)
  • US$ 4780/peserta (Malaysia) (Harga belum termasuk pajak dan promo)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

 

Copyright © 2025 Training Oil Gas | Pusat Manajemen | Pelatihan Rumah Sakit
Butuh bantuan! Klik disini

Kami siap membantu, silahkan berkomunikasi langsung dengan Tim Kami yang sedang online saat ini. Jika jaringan sedang sibuk, mungkin karena sedang melayani pelanggan lain. Untuk respon cepat silahkan kirim email ke: info@bmdstreet.com untuk pelayanan via Help Desk

Customer Support

Rizkya - Head Office

Online

Customer Support

Umu Hanifatul - Head Office

Online

Customer Support

Eva Arlinda - Head Office

Online

Customer Support

Andini Eryani - Head Office

Online

Rizkya - Head OfficeCustomer Support

Hi, Ada yang Bisa saya bantu pak/bu? 10:26

Umu Hanifatul - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 10:26

Eva Arlinda - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 10:26

Andini Eryani - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 10:26