Author: admin

Training Pump and Turbine Selection,Design and Operation for Oil and Gas Production Facilities

Petroleum·

OBJECTIVES :

After participate in this training, the participants will be able and capable to :

  • Understand the basic concept of oil and gas handling with surface processes and operation facilities , and how to operate pump and turbine technology in field application.
  • Diagnostic of oil and gas flow  performance under actual pumping drive mechanism and future performance with current handling processes.
  • Analyze the production flow potential of oil and gas flow under actual handling facilities system processes and to plan the better development processes according to fluid flow capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects the phenomena of oil and gas handling processes and operation with given surface facilities and pumping using turbine system.

AUDIENCE:

No specified  (Operator/ Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Introduction to Oil and Gas Production Operation

Oil Surface Production Facilities

  • Well Equipments
  • Pigging System
  • Separator
  • Gas Scrubber
  • Gas Dehydarator
  • Pumps : Centrifugal, Reciprocating, Diaphragm

Gas Surface Processing Facilities

  • Gas Sweetening
  • Heat Exchanger
  • Fractination, Liquification, Refrigeration System
  • Compressor

Pump Basic Theory

  • Centrifugal Pump
  • Conservation of Mass
  • Specific Velocity
  • Pump Performance
  • Cavitation

Pump Specification

  • Pump Specification
  • Flow Capacity
  • Fluid Properties
  • Head
  • Net Positive Heads
  • Rotation Determination and Pump Types
  • Viscous Fluid Correction
  • Material Selection
  • Prime Movers Selection

Pump Application

  • Pump Instalation Plan
  • Pump Application Example

Pump Construction

  • Pump Classification by Impeller
  • Pump Classification by Casing
  • Pump Classification by Stage Number
  • Pump Classification by Axis Position

Pump Operation

  • Head Capasity Curve
  • Parallel and Serrial Operation
  • Capasity Regulator
  • Water Hummer
  • Surging
  • Pressure Fluctuation
  • Automatic Operation

Pump Instalation

  • Horizontal Instalation
  • Vertical Instalation
  • Submersible Instalation
  • Pipping System
  • Vibration and Noise Protection

Pump Maintenance

  • First Inspection
  • Operation Condition Obervation
  • Savety Instrument
  • Maintenace Management
  • Overhaul

Pump Trouble Shooting

  • General Trouble Shooting
  • Submersible Pump Trouuble Shooting

Turbine Fundamental Concept

  • Gas turbine thermodynamics
  • Machinery components analysis : Compressor, Combustor, Gas producer turbine and Power turbine, sealing system
  • Gas turbine performance
  • Off design behavior
  • Gas turbine material
  • Gas turbine control (speedtronic) and instrument

Gas Turbine operation and maintenance

  • Gas turbine predictive maintenance and preventive maintenance
  • (Vibration, lube oil analysis) and interval maintenance
  • Gas turbine failure and failure analysis (case study)
  • Life cycle cost (Cost effectives) of gas turbine
  • Selection and Application gas turbine of gas transmission and pumping

DURATION

3 Day

FASILITY

Normal Class

Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Pump and Turbine Selection,Design and Operation for Oil and Gas Production Facilities year 2024:

  • 02-04 Januari 2024 Jakarta
  • 05-07 Februari 2024 Yogyakarta
  • 04-06 Maret 2024 Bandung
  • 01-03 April 2024 Surabaya
  • 06-08 Mei 2024 Bogor
  • 03-05 Juni 2024 Bali
  • 01-03 Juli 2024 Jakarta
  • 05-07 Agustus 2024 Yogyakarta
  • 02-04 September 2024 Bandung
  • 01-03 Oktober 2024 Surabaya
  • 04-06 November 2024 Bogor
  • 02-04 Desember 2024 Malang

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 13.750.000,-/peserta (Lombok)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Principles and Practice of Flow Measurements

foto web, Petroleum·

OBJECTIVE

Training Principles and Practice of Flow Measurements – This course is intended to give a breadth and depth analysis in oil and gas flow measurement problems which are actually and frequently occurred in the field. In this course the way to diagnose and solve the problem will be shown. Beside that how to detect ant determine micelleneous constituents inoil and gas will be presented too. The participants will be brought to current methods in analyzing oil and gas flow measurement problems that occured in actual fields. Skills in identifying various problems will be build during the course. The modern technique uses a relatively complicated method, but, more accurate and serves much more information needed for oil and gas floe measurement.

After participate in this training, the participants will be able and capable to

  • Understand the basic concept of oil and gas flow measurement , oil and gas handling processes and operation, and how to operate this technology in field application.
  • Analyze the oil and gas flow measurement  under with actual handling system processes using various methods and to plan the better development of oil and gas processing system.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas flow measurement, oil and gas  detection, calculation and operation.

COURSE CONTENS

Introduction to Standard Oil and Gas Measurement Tools.

  • Level
  • Density
  • Temperature

Notion of Static and Dynamic Measurement

  • ASTM Table in Oil Volume Calculation

Land Tank Measurement

  • Calibration Table
  • Oil sampling technique
  • Level, Density and Temperature Measurement.

Land Tank Volume Calculation

  • Liter 150C-Barrel 60oF
  • Oil Stock Calculation
  •  Bill of Loading Calculation
  • After Reciept Calculation
  • Supplay Calculation
  • Working and Discharge Calculation

Oil Losses

  • Kind of losses
  • Cause and sources of losses
  • Losses Calculation
  • Methodology to reduce losses

Flow Measurement and Technology

  • Principle of Oil Flow Measurement
  • Direct Measurement
  • Turbin
  • Elektromagnetic
  • Vortex
  • Ultrasonik
  • Coriolis
  • Thermal Mass
  • Positif Displacement
  • Variabel Area (rotameters)

Indirect Measurement

  • Orifice
  • Flow Nozle
  • Venturi
  • Wedge
  • V-cone
  • Pitot tube / Anubar
  • Target meter

Multiphase Flow Meter

  • MPFM Phylosophy
  • Multiphase Flow
  • MPFM Technology
  • MPFM Design Guidelines

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket, etc, Convenient training facilities in four or five stars hotel.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Principles and practice of Flow Measurements year 2024:

  • 16-18 Januari 2024 Bali
  • 20-22 Februari 2024 Bogor
  • 19-21 Maret 2024 Surabaya
  • 16-18 April 2024 Yogyakarta
  • 20-22 Mei 2024 Jakarta
  • 18-20 Juni 2024 Bali
  • 16-18 Juli 2024 Malang
  • 20-22 Agustus 2024 Jakarta
  • 17-19 September 2024 Bandung
  • 15-17 Oktober 2024 Surabaya
  • 19-21 November 2024 Jakarta
  • 17-19 Desember 2024 Yogyakarta

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

REFERENSI

  1. Chevron Geothermal Salak
  2. Chevron Geothermal Indonesia, Ltd.
  3. PT. Chevron Pacivic Indonesia
  4. Chevron SMO

TESTIMONIAL

  • “Materi training sangat berguna untuk pekerjaan saya dan pemateri sangat menguasai materi. over all training ini sangat baik dan berkesan” Imam Baihaqi Salam-Chevron Geothermal Indonesia, Ltd.

Principle-BMD

Training Production Operation and Problem Solving

Petroleum·

LATAR BELAKANG :

Setelah menyelesaikan Training Production Operation and Problem Solving ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan dan melakukan optimisasi pada saat operasi produksi sumur-sumur minyak, gas dan reservoir panas bumi dilaksanakan, pengembangan pelaksannaan optimisasi produksi ini untuk meningkatkan kinerja produksi sumuran dan lapangan.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian permasalahan dalam operasi produksi sumur-sumur minyak dan bas bumil.
  • Membuat analisis sederhana terhadap data sumuran minyak, gas dan panas bumi ,melakukan peramalan kinerja dan merencanakan pengembangn operasi produksi
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dari seluruh data perolehan data tubing, flowline, choke, perforasi, gravel-pack, sub-surface savety valve pada sumuran, merencanakan pengembangannya dengan memperhitungan kemampuan masing-masing sumuran.
  • Mempergunakan pengetahuan operasi produksi untuk keperluan penyelesaian permasalahan sumur seperti : pada saat penyemenan, penanganan scale, pasir, korosi dan damage yang mungkin terjadi pada sumuran minyak dan gas bumi.
  • Memahami prinsip-prinsip dasar perancangan : penyemenan, workover, stimulasi sumuran dengan  pengasaman dan perekahan hidrololik, perencanaan work over dan lain-lain

PRE-REQUISITE :

Latar belakang  : Operator, Senior Operator, Engineer/Non Engineer

MATERI TRAINING  :

Geologic Considerations in producing Operation

  • Introduction
  • Sandstone Reservoirs
  • Geologic Factors Affecting Reservoir Properties in Sandstone
  • Application of Geologic concepts in Specific Sandstone
  • Carbonate Reservoirs
  • Application of Geologic Concepts in Carbonate Reservoirs

Reservoir Considerations in Well Completions

  • Introduction
  • Hydrocarbon Properties of Oil and Gas
  • Recommendations of Obtaining Good Test Data
  • “Eyeball” Interpretation of Pressure Charts

Primary Cementing

  • Introduction
  • Cementing Materials
  • Cement Additives
  • Cement Bonding
  • Flow Properties of Primary Cements
  • Displacement Mechanics
  • Cost of Primary Cementing
  • Special Problem Situations-New Developments
  • Primary Cementing Practices

Well Completion Design

  • Factors Influencing Well Completion Design
  • Conventional Tubular Configuration
  • Unconventional Tubular Configurations
  • Sizing Production Tubular
  • Completion Interval
  • Permanent Well Completions (PWC)
  • Tubingless Completion

Tubing Strings,Packers,Subsurface Control Equipment

  • Tubing Strings
  • Steel Grades
  • Tubing Connections
  • Makeup of API Threaded connection
  • Design of Tubing Strings
  • High Strength Tubing
  • Physical Properties of Steel
  • Sensitivities of High Strength Tubing
  • Tubing Inspection
  • Tubing Handling Practices
  • Equipment for Use With-Strength Tubing
  • Tubing Running Practices
  • API Publication List
  • Packers and Subsurface Control Equipment
  • Production Packers
  • Subsurface Control Equipment

Perforating Oil and Gas Wells

  • Introduction
  • Types of Perforators
  • Evaluation of Perforator Performance
  • Factors  Aftecting Gun Perforating Results
  • Perforating in a Clean Fluid with Differential Pressure Into Wellbore
  • A Comparison between the GEO-VANN System and Other Perforating Methods in Wells Equipped with Packers

Completion and Workover Fluids

  • Functions-Requirements-Selection Criteria
  • Formation Damage Related to Solids
  • Oil Fluids-Practical Application
  • Conventional Water-Base Mud
  • Oil Base or Invert-Emulsion Muds
  • Foam
  • Perforating Fluids
  • Packer Fluids
  • Well Killing

Through-Tubing Production Logging

  • Introduction
  • Logging Device
  • Application of Through-Tubing Production logging
  • Field Examples of Production Logging Techniques
  • Primary Cement Evaluation

Problem Well Analysis

  • Problem Wells
  • Problem Well Analysis Checklist

Parafin and Asphaltene

  • Introduction
  • Paraffin and Asphaltene Chemistry
  • Deposition Mechanisms
  • Removal of Wax Deposits
  • Preventing or Decreasing Wax Deposition
  • Design of Wax Control

Squeeze Cementing-Remedial Cementing

  • Introduction
  • Theoretical Considerations
  • Practical Considerations
  • Special Squeeze Cementing Situations
  • Planning a Squeeze Cement Job
  • Normal Operational Procedures
  • Other Operational Procedures
  • Plug-Back Operations
  • Special Cement Systems

Sand Control

  • Introduction
  • Reduction of Drag Force
  • Mechanical Methods of Sand Control
  • Practical Considerations in Gravel Packing
  • Use of screen Without Gravel
  • Resin Consolidation Methods

Formation Damage

  • Introduction
  • Basic Causes of Damage
  • Classification of Damage Mechanisms
  • Reduced Absolute Permeability
  • Increased Fluid Viscosity (Emulsion)
  • Diagnosis of Formation Damage

Surfactants for Well Treatments

  • Characteristics of Surfactants
  • Use and Action of Surfactant
  • Formation Damage Susceptible to Surfactant Treatment
  • Preventing or Removing Damage
  • Well Stimulation With Surfactants
  • Increasing Effectiveness of Rod Pumping
  • Prevention of Well Damage

Acidizing

  • Acids Used in Well Stimulation
  • Acid Additives
  • Carbonate Acidizing
  • Acidizing Techniques for Caronat Formations
  • Sandstone Acidizing
  • Potential Safety Hazard in Acidizing

Hydraulic Fracturing

  • Introduction
  • Mechanics of Fracturing
  • Production Increase from Fracturing
  • Propping the Fracture
  • Frac Fluids
  • Frac Job Design
  • Frac Job Evaluation Techniques

Scale Deposition,Removal,and Prevention

  • Introduction
  • Causes of Scale Deposition
  • Prediction and Identification of Scale
  • Scale Removal
  • Scale Prevention

Corrosion Control

  • The Corrosion Process
  • Detection and Measurement of Corrosion
  •  Corrosion Control

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Production Operation and Problem Solving 2024:

  • 24-26 Januari 2024 Bogor
  • 27-29 Februari 2024 Bali
  • 26-28 Maret 2024 Surabaya
  • 24-26 April 2024 Medan
  • 29-31 Mei 2024 Bandung
  • 26-28 Juni 2024 Yogyakarta
  • 24-26 Juli 2024 Jakarta
  • 28-30 Agustus 2024 Bali
  • 25-27 September 2024 Bogor
  • 23-25 Oktober 2024 Surabaya
  • 27-29 November 2024 Bandung

INVESTASI (TIDAK TERMASUK BIAYA AKOMODASI & PENGINAPAN):

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Production Surface Facility Production,Process,Surface Equipment & Its Operation

Petroleum·

OBJECTIVES :

After participate in this course, the participants will be able and capable to :

  • Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology and equipment performance maintenance in field application.
  • Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

AUDIENCE:

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Oil Handling and Processing Facilities and Maintenance
Oil Well Surface Production Equipment and Operation

  • Oil Well Equipment
  • Oil Well Production Operation
  • Well Automatic Safety Device

Oil Gathering System. Manifold and Flowline

  • Oil Gathering System
  • Maniflod System
  • Flowline Sizing and Design

Crude Oil and Gas Separation

  • Separator and Principle of Separation
  • Design of Separator
  • Oil Dehydration

Principles of Measurement

  • Introduction to Measurement
  • Crude Oil Measurement
  • Gas Measurement

Well Test

  • Introduction
  • Responsibility for Test
  • Preparation for Test
  • Types of Well Test
  • Equipment and Procedures
  • Accuracy of Fluid Measurement
  • Problem in Testing
  • Type of Test

Gas Handling and Processing Facilities and Maintenance
Introduction to Gas Handling and Facilities
Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservioir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Gas Compression

  •  Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition

Gas Processing

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Production Surface Facility Production,Process,Surface Equipment & Its Operation 2024:

  • 23-25 Januari 2024 Jakarta
  • 27-29 Februari 2024 Bali
  • 26-28 Maret 2024 Yogyakarta
  • 28-30 Mei 2024 Bali
  • 25-27 Juni 2024 Malang
  • 23-25 Juli 2024 Surabaya
  • 27-29 Agustus 2024 Bali
  • 24-26 September 2024 Bandung
  • 22-24 Oktober 2024 Yogyakarta
  • 26-28 November 2024 Bogor
  • 17-19 Desember 2024 Malang

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

REFERENSI :

  1. PT. Conocophillips Indonesia
  2. PT. Armindo Jaya Mandiri

Training Production Surface Facility Production,Process,Surface Equipment & ITS Operation

Training Electrical Power System Analysis Using ETAP

Design Engineering·

PENGANTAR

Training Electrical Power System Analysis Using ETAP – Dalam sistem tenaga listrik diperlukannya hasil Analisa. Hasil Analisa tersebut kemudian di implementasikan menggunakan software ETAP. ETAP atau Electrical Transient Analysis Program adalah software yang memiliki fungsi sebagai penganalisis pada sistem kelistrikan secara detail dan sistematis. Dimulai dari power hingga network.

BMD Training Centre & Consultant bermaksud menyelenggarakan program Pelatihan ETAP untuk dapat menjawab kebutuhan tersebut. Sekaligus membantu pihak-pihak terkait yang membutuhkan untuk menerapkan dan memenuhinya. Berbekal kompetensi dan pengalaman lebih dari 10 tahun dalam memenuhi persyaratan pelanggan dan regulasi yag dibutuhkan.

MAKSUD & TUJUAN

Maksud dan tujuan dari program Training Electrical Power System Analysis Using ETAP diantaranya, yaitu:

  1. Dapat memahami konsep dari ETAP
  2. Menambah pengetahuan mengenai penggunaan ETAP
  3. Dapat melalukan Analisa menggunakan ETAP.

BAHAN AJAR

  • Membangun diagram satu garis menggunakan ETAP
  • Studi aliran beban menggunakan ETAP
  • Membuat analisis hubungan pendek menggunakan ETAP
  • Membuat analisis percepatan motor menggunakan ETAP
  • Membuat analisis koordinasi perangkat proteksi menggunakan ETAP
  • Membuat analisis stabilitas transien menggunakan ETAP
  • Membuat analisis harmonik menggunakan ETAP.

SIAPA PESERTA YANG HARUS HADIR…?

Program ini di kemas dan dikembangkan untuk memenuhi kebutuhan terkait dengan implementasi dan persyaratan yang diperlukan. Dimana di rekomendasikan untuk di ikuti oleh teknisi, operator dan tenaga ahli terkait yang ingin dapat meningkatkan pengetahuan serta wawasan mengenai penggunaan ETAP.

Investation (Not Include Hotel Acomodation)

Online Class

Rp.5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft Copy dan Hard Copy), Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di hotel berbintang

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

081382807230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training ETAP tahun 2024 :

  • 08-10 Januari 2024 Jakarta
  • 12-14 Februari 2024 Yogyakarta
  • 12-14 Maret 2024 Bandung
  • 13-15 Mei 2024 Bogor
  • 10-12 Juni 2024 Bali
  • 08-10 Juli 2024 Jakarta
  • 12-14 Agustus 2024 Yogyakarta
  • 09-11 September 2024 Bandung
  • 07-09 Oktober 2024 Surabaya
  • 11-13 November 2024 Bogor
  • 09-11 Desember 2024 Malang

Available on request for time, place and facilities call us for more information

Training PDMS (Plant Design Management System)

Design Engineering·

PENGANTAR

Training PDMS (Plant Design Management System) – PDMS merupakan software dengan bentuk 3D sehingga mampu menghasilkan gambar dengan format yang memiliki akurasi tinggi. Selain itu PDMS dapat menampilkan grafik yang dapat mengikuti struktur asli dari project yang dibuat.

BMD Training Centre & Consultant bermaksud menyelenggarakan program Pelatihan PDMS untuk dapat menjawab kebutuhan tersebut. Sekaligus membantu pihak-pihak terkait yang membutuhkan untuk menerapkan dan memenuhinya. Berbekal kompetensi dan pengalaman lebih dari 10 tahun dalam memenuhi persyaratan pelanggan dan regulasi yag dibutuhkan.

MAKSUD & TUJUAN

Maksud dan tujuan dari program Training PDMS (Plant Design Management System) diantaranya, yaitu:

  1. Dapat memahami konsep dari PDMS
  2. Menambah pengetahuan mengenai penggunaan PDMS
  3. Memberikan sebuah keterampilan khusus untuk menjadi administrator PDMS.

BAHAN AJAR

  • Sistem administrasi
  • Cakupan dalam PDMS administrasi
  • DAC (Database Acces Control)
  • Setup database dengan menggunakan excel
  • Isodraft setup and draft setup
  • Membuat isometric symbol
  • Setup isodraft
  • Mmebuat draft berisi symbol library
  • Melakukan setup pada ADP draft
  • Coding system
  • Connection compability (COCO) table
  • Component creation
  • Membuat deksripsi teks
  • Membuat component isulation & specification
  • UDA (User Defined Attribute)
  • Component Weight
  • Membuat Piping Specification dengan menggunakan excel.

SIAPA PESERTA YANG HARUS HADIR…?

Program ini di kemas dan dikembangkan untuk memenuhi kebutuhan terkait dengan implementasi dan persyaratan yang diperlukan. Dimana di rekomendasikan untuk di ikuti oleh teknisi, operator dan tenaga ahli terkait yang ingin dapat meningkatkan pengetahuan serta wawasan mengenai penggunaan PDMS.

Investation (Not Include Hotel Acomodation)

Online Class

Rp.5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft Copy dan Hard Copy), Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di hotel berbintang

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

081382807230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training PDMS tahun 2024 :

  • 10-12 Januari 2024 Malang
  • 14-16 Februari 2024 Bogor
  • 13-15 Maret 2024 Surabaya
  • 15-17 Mei 2024 Yogyakarta
  • 12-14 Juni 2024 Jakarta
  • 10-12 Juli 2024 Bali
  • 14-16 Agustus 2024 Bogor
  • 11-13 September 2024 Surabaya
  • 09-11 Oktober 2024 Bandung
  • 13-15 November 2024 Yogyakarta
  • 11-13 Desember 2024 Jakarta

Available on request for time, place and facilities call us for more information

Training Oil Gas and Water Handling Facilities

Petroleum·

Who Should Attend

Production engineers and supervisors, Well Service engineers and supervisors, Materials, logistics and warehouse personnel, Work over engineers and supervisors

You will learn

  • A Comprehensive discussion of Production equipment and practices including Artificial Lift Equipment
  • Understanding the basic of Production Techniques and Production Problems
  • The practical and technical considerations in the design, selection and operation of your down hole and Surface production equipment
  • How to maintain safety environmental excellence in production and well service operations

About The Course

After participate in this training, the participants will be able and capable to :

  • Understand the basic concept of oil , gas and water handling processes and facilities, and how to operate this technology in field application.
  • Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas and water handling processes. 

Course Contents

Gas Handling Facilities

Introduction to Gas Handling and Facilities

Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservoir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Gas Compression

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition

Gas Processing

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

Oil Handling Facilities
Oil Well Surface Production Equipment and Operation

  • Oil Well Equipment
  • Oil Well Production Operation
  • Well Automatic Safety Device

Oil Gathering System. Manifold and Flowline

  • Oil Gathering System
  • Manifold System
  • Flow line Sizing and Design

Crude Oil and Gas Separation

  • Separator and Principle of Separation
  • Design of Separator
  • Oil Dehydration

Principles of Measurement

  • Introduction to Measurement
  • Crude Oil Measurement
  • Gas Measurement

Well Test

  • Introduction
  • Responsibility for Test
  • Preparation for Test
  • Types of Well Test
  • Equipment and Procedures
  • Accuracy of Fluid Measurement
  • Problem in Testing
  • Type of Test
  • Water Handling Facilities

The Chemistry of Water

  • Chemical and Physical Properties
  • Water Sampling Procedures
  • Quantitative Analysis of Oilfield Waters
  • Water Analysis Techniques

Water Formed Scales

  • Why Scales Form
  • Predicting Scale Formation
  • Mixing Waters – Compatibility
  • Preventing Scale Formation
  • Scale Removal Methods

Corrosion in Water Injection System and Disposal System

  • Theory of Corrosion
  • The Effect of Metal Composition
  • Effect of Water Composition
  • Forms of Corrosion
  • Corrosion Control Methods
  • Corrosion Inhibitors
  • Internal Coatings and Linings for Tubular Goods
  • Internal Tank Coatings and Cathodic Protection
  • Non-Metallic Tubular Goods Types
  • Removal of Corrosive Gases from Water
  • Oxygen Removal
  • Removal of Hydrogen Sulfide from Water
  • Removal of Carbon Dioxide from Water
  • Oxygen Exclusion
  • Design to Minimize Corrosion
  • Corrosion Monitoring Techniques

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertfikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Oil Gas and Water Handling Facilities  Tahun 2024 :

  • 03-05 Januari 2024 Malang
  • 05-07 Februari 2024 Jakarta
  • 05-07 Maret 2024 Surabaya
  • 02-04 April 2024 Bali
  • 06-08 Mei 2024 Bandung
  • 04-06 Juni 2024 Malang
  • 02-04 Juli 2024 Surabaya
  • 06-08 Agustus 2024 Yogyakarta
  • 03-05 September 2024 Surabaya
  • 02-04 Oktober 2024 Bogor
  • 05-07 November 2024 Bali
  • 03-05 Desember 2024 Surabaya

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Pengelolaan lapangan Mature, Tehnik & Strategi Meningkatkan Produksi

Petroleum·

LATAR BELAKANG :

Setelah menyelesaikan training ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar perhitungan dan melakukan optimisasi pada saat operasi produksi sumur-sumur dan reservoir minyak, gas dilaksanakan, pengembangan pelaksannaan optimisasi produksi ini untuk meningkatkan kinerja produksi sumuran dan lapangan mature.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian permasalahan dalam operasi produksi sumur-sumur minyak dan gas bumi lapangan mature dan mencari strategi meningkatkan produksinya.
  • Membuat analisis sederhana terhadap data sumuran minyak, gas dan panas bumi ,melakukan peramalan kinerja dan merencanakan pengembangn operasi produksi lapangan mature.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana dari seluruh data perolehan data tubing, flowline, choke, perforasi, gravel-pack, sub-surface savety valve pada sumuran, merencanakan pengembangannya dengan memperhitungan kemampuan masing-masing sumuran pada lapangan mature.
  • Mempergunakan pengetahuan operasi produksi untuk keperluan penyelesaian permasalahan sumur seperti : pada saat penyemenan, penanganan scale, pasir, korosi dan damage yang mungkin terjadi pada sumuran minyak dan gas bumi lapangan mature.
  • Memahami prinsip-prinsip dasar perancangan : penyemenan, workover, stimulasi sumuran dengan  pengasaman dan perekahan hidrololik, perencanaan work over dan lain-lain untuk lapangan mature.

PRE-REQUISITE :

Latar belakang  : Operator, Senior Operator, Engineer/Non Engineer

MATERI TRAINING :

Geologic Considerations in producing Operation

  • Introduction
  • Sandstone Reservoirs
  • Geologic Factors Affecting Reservoir Properties in Sandstone
  • Application of Geologic concepts in Specific Sandstone
  • Carbonate Reservoirs
  • Application of Geologic Concepts in Carbonate Reservoirs

Reservoir Considerations in Well Completions

  • Introduction
  • Hydrocarbon Properties of Oil and Gas
  • Recommendations of Obtaining Good Test Data
  • “Eyeball” Interpretation of Pressure Charts

Well Completion Design

  • Factors Influencing Well Completion Design
  • Conventional Tubular Configuration
  • Unconventional Tubular Configurations
  • Sizing Production Tubular
  • Completion Interval
  • Permanent Well Completions (PWC)
  • Tubingless Completion

Tubing Strings,Packers,Subsurface Control Equipment

  • Tubing Strings
  • Steel Grades
  • Tubing Connections
  • Make  up of API Threaded connection
  • Design of Tubing Strings
  • High Strength Tubing
  • Physical Properties of Steel
  • Sensitivities of High Strength Tubing
  • Tubing Inspection
  • Tubing Handling Practices
  • Equipment for Use With-Strength Tubing
  • Tubing Running Practices
  • API Publication List
  • Packers and Subsurface Control Equipment
  • Production Packers
  • Subsurface Control Equipment

Perforating Oil and Gas Wells

  • Introduction
  • Types of Perforators
  • Evaluation of Perforator Performance
  • Factors  Aftecting Gun Perforating Results
  • Perforating in a Clean Fluid with Differential Pressure Into Wellbore
  • A Comparison between the GEO-VANN System and Other Perforating Methods in Wells Equipped with Packers

Completion and Workover Fluids

  • Functions-Requirements-Selection Criteria
  • Formation Damage Related to Solids
  • Oil Fluids-Practical Application
  • Conventional Water-Base Mud
  • Oil Base or Invert-Emulsion Muds
  • Foam
  • Perforating Fluids
  • Packer Fluids
  • Well Killing

Production Logging

  • Introduction
  • Logging Device
  • Application of Production logging
  • Field Examples of Production Logging Techniques
  • Primary Cement Evaluation

Problem Well Analysis

  • Problem Wells
  • Problem Well Analysis Checklist

Parafin and Asphaltene

  • Introduction
  • Paraffin and Asphaltene Chemistry
  • Deposition Mechanisms
  • Removal of Wax Deposits
  • Preventing or Decreasing Wax Deposition
  • Design of Wax Control

Squeeze Cementing-Remedial Cementing

  • Introduction
  • Theoretical Considerations
  • Practical Considerations
  • Special Squeeze Cementing Situations
  • Planning a Squeeze Cement Job
  • Normal Operational Procedures
  • Other Operational Procedures
  • Plug-Back Operations
  • Special Cement Systems

Sand Control

  • Introduction
  • Reduction of Drag Force
  • Mechanical Methods of Sand Control
  • Practical Considerations in Gravel Packing
  • Use of screen Without Gravel
  • Resin Consolidation Methods

Formation Damage

  • Introduction
  • Basic Causes of Damage
  • Classification of Damage Mechanisms
  • Reduced Absolute Permeability
  • Increased Fluid Viscosity (Emulsion)
  • Diagnosis of Formation Damage

Surfactants for Well Treatments

  • Characteristics of Surfactants
  • Use and Action of Surfactant
  • Formation Damage Susceptible to Surfactant Treatment
  • Preventing or Removing Damage
  • Well Stimulation With Surfactants
  • Increasing Effectiveness of Rod Pumping
  • Prevention of Well Damage

Acidizing

  • Acids Used in Well Stimulation
  • Acid Additives
  • Carbonate Acidizing
  • Acidizing Techniques for Caronat Formations
  • Sandstone Acidizing
  • Potential Safety Hazard in Acidizing

Hydraulic Fracturing

  • Introduction
  • Mechanics of Fracturing
  • Production Increase from Fracturing
  • Propping the Fracture
  • Frac Fluids
  • Frac Job Design
  • Frac Job Evaluation Techniques

Scale Deposition,Removal,and Prevention

  • Introduction
  • Causes of Scale Deposition
  • Prediction and Identification of Scale
  • Scale Removal
  • Scale Prevention

Corrosion Control

  • The Corrosion Process
  • Detection and Measurement of Corrosion
  • Corrosion Control

Workover and Completion Rigs Workover System

  • Conventional Production Rigs
  • Non-Conventional Workovers System
  • Concentric Tubing Workovers

Workover Planning

  • Reasons for Workover
  • Workover to Alleviate Formation Damage
  • Workover for Low Permeability Well
  • Workover of Wells in Partially Pressure-Depleted Reservoirs
  • Workover to Reduces Water Production in Oil and Gas Wells
  • Workover to Reduces Gas Production in Oil Wells
  • Workover for Sand Control
  • Workover to Repair Mechanical Failure
  • Workover to Change Zones or Reservoirs
  • Workover to Multicomplete
  • Workover to Increase Production in Well Producing High Viscosity (Low Gravity) Oil
  • Workover Economics

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Tahun Training Pengelolaan lapangan Mature, Tehnik & Strategi Meningkatkan Produksi tahun 2024:

  • 10-12 Januari 2024 Malang
  • 14-16 Februari 2024 Bogor
  • 13-15 Maret 2024 Surabaya
  • 15-17 Mei 2024 Yogyakarta
  • 12-14 Juni 2024 Jakarta
  • 10-12 Juli 2024 Bali
  • 14-16 Agustus 2024 Bogor
  • 11-13 September 2024 Surabaya
  • 09-11 Oktober 2024 Bandung
  • 13-15 November 2024 Yogyakarta
  • 11-13 Desember 2024 Jakarta

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 10.500.000,-/peserta (Jakarta)
  • Rp. 10.500.000-/peserta (Bandung)
  • Rp. 11.500.000,-/peserta (Yogyakarta)
  • Rp. 13.000.000,-/peserta (Bali)
  • Rp. 13.750.000,-/peserta (Lombok)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Well Testing Practical and Analysis

Petroleum·

LATAR BELAKANG :

Setelah menyelesaikan Training Well Testing Practical and Analysis ini diharapkan peserta dapat :

  • Memahami prinsip dasar operasi dan interpretasi tes sumur
  • Melakukan interpretasi data tes sumur
  • Membuat perencanaan atau desain suatu tes sumur
  • Membuat atau menggunakan program-program kecil yang membantu dalam interpretasi data tes sumur

PESERTA :

Field Superintendent, Sr. Operator, Jr. Operator, Jr. Engineer,NonEngineer

PRE-REQUISITE

  • Mempunyai pengetahuan dasar teknik perminyakan
  • Mempunyai pengetahuan dasar teknik reservoir dan produksi
  • Mempunyai pengalaman lapangan dalam bidang produksi dan reservoir

MATERI TRAINING :

Pengenalan Teknik Perminyakan

Dasar-Dasar Tes Sumur

  • Prinsip Dasar Tes Sumur
  • Aliran Fluida Dalam Media Berpori
  • Macam-Macam Tes Sumur

Pressure Drawdown Test

  • Analisis Pressure Drawdown Pada Periode Transien
  • Analisis Pressure Drawdown Pada Periode Transien Lanjut
  • AnalisisPressureDrawdownPadaPeriodeSemi-SteadyState

Pressure Buildup Test

  • Prinsip Superposisi
  • Pressure Buildup Ideal
  • Actual Buildup Case
  • Lamanya Pengaruh Wellbore Storage
  • Penentuan Tekanan Rata-Rata
  • Pressure Buildup Untuk Sistem Lebih Dari Satu Fasa
  • Analisis Pressure Buildup Dibawah Pengaruh Redistribusi Fasa Pada Lubang Bor

Multi Rate Test

  • Persamaan Dasar Untuk Multiple Rate Test
  • Two Rate Flow Test
  • Deliverability Test
  • Variable Injection Rate Test

Multiple Well Test

  • Interference Test
  • Interference Test Pada Reservoir Terbatas (Bounded)
  • Pulse Testing
  • Analisis Pulse Test Dengan Metode Stegemeier

Analisis Tes Sumur Dengan Menggunakan Type Curve

  • Prinsip Analisis Type Curve
  • Ramey’s Type Curve dan McKinley Type Curve

Tes Sumur Sumur Gas

  • Sifat-Sifat Gas
  •  Analisis Tes Sumur Pada Sumur Gas

Injection Well Testing

  • Injectivity Analysis
  • Falloff Test Analysis
  • Step-Rate Testing

Drill Stem Testing

  • Analisis DST

Tes Sumur Untuk Reservoir Rekah Buatan

  • Transien Tekanan Pada Hydraulically Vertical Fractured Reservoir
  • Efek Skin, Wellbore Storage dan Geometri Rekahan Terhadap Respon Tekanan
  • Finite Fracture Conductivity
  • Massive Hydraulic Fracturing dan Pengujian Pada Tekanan Konstan

Tes Sumur Untuk Reservoir Rekah Alami

  • Kelakuan Transien Tekanan Pada Reservoir Rekah Alami
  • Efek Incomplete Test
  • Pendekatan Gradient Flow Model
  • Analisis Transien Tekanan Pada Reservoir Rekah Alami Dibawah Pengaruh Alirab Spherical

Interpretasi Data Tes Sumur Horizontal

  • Analisis Transien Tekanan Sumur Horizontal Secara Grafis
  • Analisis Transien Tekanan Sumur Horizontal Dengan Type Curve Matching

Well Sounder

  • Analisis Data Well Sounder

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230,  0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

JADWAL TRAINING WELL TESTING PRACTICAL AND ANALYSIS TAHUN 2024:

  • 03-05 Januari 2024 Malang
  • 07-07 Februari 2024 Bogor
  • 06-08 Maret 2024 Surabaya
  • 03-05 April 2024 Bandung
  • 06-08 Mei 2024 Medan
  • 05-07 Juni 2024 Jakarta
  • 03-05 Juli 2024 Bali
  • 07-09 Agustus 2024 Bogor
  • 04-06 September 2024 Surabaya
  • 02-04 Oktober 2024 Bandung
  • 06-08 November 2024 Yogyakarta
  • 04-06 Desember 2024 Jakarta

INVESTASI (TIDAK TERMASUK BIAYA AKOMODASI & PENGINAPAN) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

 

Training Well Injection Production and Reservoir Synergetic System For Steam Flood Processes

Petroleum·

LATAR BELAKANG :

Setelah menyelesaikan Training Well Injection Production and Reservoir  ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar peningkatan perolehan reservoir minyak bumi dengan mempergunakan metoda EOR dan terutama sekali dengan metoda steam injection, termasuk uraian tentang model geologi dan reservoirnya.
  • Melakukan perhitungan-perhitungan sederhana untuk optimisasi dan penentuan kinerja produksi sumur-sumur minyak bumi yang mengalami steam injection.
  • Mengenal baik peralatan produksi di atas (surface) maupun di bawah (downhole) permukaan untuk pelaksanaan steamflood di lapangan.
  • Membuat analisis sederhana terhadap data sumuran minyak yang mendapat injeksi uap, kemudian meramalkan kinerja produksi akibat operasi steam flood.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perancangan proyek steamflood beserta analisis keekonomiannya.
  • Mempergunakan pengetahuan tentang reservoir management dan pengenelnalan teknologi mutakhir tentang steamflood, untuk keperluan peningkatan perolehan produksi minyak bumi.

PRE-REQUISITE :

Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

MATERI TRAINING :

Introduction

  • Introduction to EOR
  • EOR Production
  • EOR Concept
  • Screening Criteria
  • Thermal EOR
  • Chemical EOR
  • Miscible EOR

Steam Injection Processes

  • Cyclic Steam Injection
  • Continuous Steam Injection

Thermal Properties of Fluids and Solids

  • Thermal Properties
  • Temperature Effect on Fluid and Rock Properties
  • Thermodynamic Properties of Steam
  • Laboratory Analysis

Reservoir Geology and Thermal EOR

  • Geology Elements Affecting Steamflood Performance
  • Defining Effective Reservoir
  • Importance of Depositional Environment
  • Displaying The Geologic Model
  • Relationship Between Geologic and Simulation Models
  • Summary of Geologic Elements in Steamflooding

Surface Equipment and Operations

  • Steam Generation and Distribution
  • Oil/Gas Gathering and Treatment
  • Water Reclamation and Softening Plant

Downhole Equipment and Operations

  • Well Completion
  • Remedial Well Work
  • Well Stimulatuion
  • Profile Modification

Performance Prediction

  • Steam Metering and Heat Loss Calculation
  • Prediction of Cyclic Steam Performance
  • Prediction of Steamflood Performance
  • Fieldwide Forecast

Project Design and Evaluation

  • Steamflood Development Strategy
  • Evaluation and Screening of Candidates
  • Design Consideration
  • Project Modification

Steamflood Reservoir Management

  • Introduction to Steamflood Reservoir Management
  • Steamflood Design and Implementation
  • Injection Well Monitoring and Surveillance
  • Production Well Monitoring and Surveillance
  • Casing Vapor Collection System Monitoring and Surveillance
  • Observation Well Monitoring and Surveillance
  • Core Wells
  • Cross-Well Tomography
  • Data Management, Elevation and Interpretaion
  • Simulation Models as Reservoir Management Tools
  • Project Modification

Recent Advance s and Ongoing Developments in Steamflood Technology

  • Steam Generation and Distribution
  • Subsurface Equipment and Methods
  • Process Improvements
  • Reservoir Description
  • Performance Prediction
  • Future Technology Needs

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Well Injection Production and Reservoir Synergetic System For Steam Flood Processes 2024:

  • 16-18 Januari 2024 Bali
  • 20-22 Februari 2024 Bogor
  • 19-21 Maret 2024 Surabaya
  • 16-18 April 2024 Yogyakarta
  • 20-22 Mei 2024 Jakarta
  • 18-20 Juni 2024 Bali
  • 16-18 Juli 2024 Malang
  • 20-22 Agustus 2024 Jakarta
  • 17-19 September 2024 Bandung
  • 15-17 Oktober 2024 Surabaya
  • 19-21 November 2024 Jakarta
  • 17-19 Desember 2024 Yogyakarta

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • IDR. 11.000.000,-/peserta (Jakarta)
  • IDR. 11.000.000-/peserta (Bandung)
  • IDR. 12.000.000,-/peserta (Yogyakarta)
  • IDR. 14.000.000,-/peserta (Bali)
  • IDR. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Butuh bantuan! Klik disini

Kami siap membantu, silahkan berkomunikasi langsung dengan Tim Kami yang sedang online saat ini. Jika jaringan sedang sibuk, mungkin karena sedang melayani pelanggan lain. Untuk respon cepat silahkan kirim email ke: [email protected] untuk pelayanan via Help Desk

Customer Support

Mei Dwi - Head Office

Online

Customer Support

Umu Hanifatul - Head Office

Online

Customer Support

Eva Arlinda - Head Office

Online

Customer Support

Andini Eryani - Head Office

Online

Mei Dwi - Head OfficeCustomer Support

Hi, Ada yang Bisa saya bantu pak/bu? 00.00

Umu Hanifatul - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Eva Arlinda - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Andini Eryani - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00