Tag: Training Oil and Gas tahun 2013

Training Well Testing Practical and Analysis

Petroleum·

LATAR BELAKANG :

Setelah menyelesaikan Training Well Testing Practical and Analysis ini diharapkan peserta dapat :

  • Memahami prinsip dasar operasi dan interpretasi tes sumur
  • Melakukan interpretasi data tes sumur
  • Membuat perencanaan atau desain suatu tes sumur
  • Membuat atau menggunakan program-program kecil yang membantu dalam interpretasi data tes sumur

PESERTA :

Field Superintendent, Sr. Operator, Jr. Operator, Jr. Engineer,NonEngineer

PRE-REQUISITE

  • Mempunyai pengetahuan dasar teknik perminyakan
  • Mempunyai pengetahuan dasar teknik reservoir dan produksi
  • Mempunyai pengalaman lapangan dalam bidang produksi dan reservoir

MATERI TRAINING :

Pengenalan Teknik Perminyakan

Dasar-Dasar Tes Sumur

  • Prinsip Dasar Tes Sumur
  • Aliran Fluida Dalam Media Berpori
  • Macam-Macam Tes Sumur

Pressure Drawdown Test

  • Analisis Pressure Drawdown Pada Periode Transien
  • Analisis Pressure Drawdown Pada Periode Transien Lanjut
  • AnalisisPressureDrawdownPadaPeriodeSemi-SteadyState

Pressure Buildup Test

  • Prinsip Superposisi
  • Pressure Buildup Ideal
  • Actual Buildup Case
  • Lamanya Pengaruh Wellbore Storage
  • Penentuan Tekanan Rata-Rata
  • Pressure Buildup Untuk Sistem Lebih Dari Satu Fasa
  • Analisis Pressure Buildup Dibawah Pengaruh Redistribusi Fasa Pada Lubang Bor

Multi Rate Test

  • Persamaan Dasar Untuk Multiple Rate Test
  • Two Rate Flow Test
  • Deliverability Test
  • Variable Injection Rate Test

Multiple Well Test

  • Interference Test
  • Interference Test Pada Reservoir Terbatas (Bounded)
  • Pulse Testing
  • Analisis Pulse Test Dengan Metode Stegemeier

Analisis Tes Sumur Dengan Menggunakan Type Curve

  • Prinsip Analisis Type Curve
  • Ramey’s Type Curve dan McKinley Type Curve

Tes Sumur Sumur Gas

  • Sifat-Sifat Gas
  •  Analisis Tes Sumur Pada Sumur Gas

Injection Well Testing

  • Injectivity Analysis
  • Falloff Test Analysis
  • Step-Rate Testing

Drill Stem Testing

  • Analisis DST

Tes Sumur Untuk Reservoir Rekah Buatan

  • Transien Tekanan Pada Hydraulically Vertical Fractured Reservoir
  • Efek Skin, Wellbore Storage dan Geometri Rekahan Terhadap Respon Tekanan
  • Finite Fracture Conductivity
  • Massive Hydraulic Fracturing dan Pengujian Pada Tekanan Konstan

Tes Sumur Untuk Reservoir Rekah Alami

  • Kelakuan Transien Tekanan Pada Reservoir Rekah Alami
  • Efek Incomplete Test
  • Pendekatan Gradient Flow Model
  • Analisis Transien Tekanan Pada Reservoir Rekah Alami Dibawah Pengaruh Alirab Spherical

Interpretasi Data Tes Sumur Horizontal

  • Analisis Transien Tekanan Sumur Horizontal Secara Grafis
  • Analisis Transien Tekanan Sumur Horizontal Dengan Type Curve Matching

Well Sounder

  • Analisis Data Well Sounder

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230,  0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

JADWAL TRAINING WELL TESTING PRACTICAL AND ANALYSIS TAHUN 2024:

  • 06-08 Mei 2024 Medan
  • 05-07 Juni 2024 Jakarta
  • 03-05 Juli 2024 Bali
  • 07-09 Agustus 2024 Bogor
  • 04-06 September 2024 Surabaya
  • 02-04 Oktober 2024 Bandung
  • 06-08 November 2024 Yogyakarta
  • 04-06 Desember 2024 Jakarta

INVESTASI (TIDAK TERMASUK BIAYA AKOMODASI & PENGINAPAN) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

 

Training Production Surface Facility Production,Process,Surface Equipment & Its Operation

Petroleum·

OBJECTIVES :

After participate in this course, the participants will be able and capable to :

  • Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology and equipment performance maintenance in field application.
  • Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

AUDIENCE:

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Oil Handling and Processing Facilities and Maintenance
Oil Well Surface Production Equipment and Operation

  • Oil Well Equipment
  • Oil Well Production Operation
  • Well Automatic Safety Device

Oil Gathering System. Manifold and Flowline

  • Oil Gathering System
  • Maniflod System
  • Flowline Sizing and Design

Crude Oil and Gas Separation

  • Separator and Principle of Separation
  • Design of Separator
  • Oil Dehydration

Principles of Measurement

  • Introduction to Measurement
  • Crude Oil Measurement
  • Gas Measurement

Well Test

  • Introduction
  • Responsibility for Test
  • Preparation for Test
  • Types of Well Test
  • Equipment and Procedures
  • Accuracy of Fluid Measurement
  • Problem in Testing
  • Type of Test

Gas Handling and Processing Facilities and Maintenance
Introduction to Gas Handling and Facilities
Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservioir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Gas Compression

  •  Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition

Gas Processing

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Production Surface Facility Production,Process,Surface Equipment & Its Operation 2024:

  • 28-30 Mei 2024 Bali
  • 25-27 Juni 2024 Malang
  • 23-25 Juli 2024 Surabaya
  • 27-29 Agustus 2024 Bali
  • 24-26 September 2024 Bandung
  • 22-24 Oktober 2024 Yogyakarta
  • 26-28 November 2024 Bogor
  • 17-19 Desember 2024 Malang

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

REFERENSI :

  1. PT. Conocophillips Indonesia
  2. PT. Armindo Jaya Mandiri

Training Production Surface Facility Production,Process,Surface Equipment & ITS Operation

Training Oil and Gas Surface Production Operation Facilities and Maintenance

Petroleum·

 OBJECTIVES :

After participate in this Training Oil and Gas Surface Production Operation Facilities and Maintenance, the participants will be able and capable to :

  • Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology and equipment performance maintenance in field application.
  • Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

BAHAN AJAR

Oil Handling and Processing Facilities and Maintenance
Oil Well Surface Production Equipment and Operation

  • Oil Well Equipment
  • Oil Well Production Operation
  • Well Automatic Safety Device

Oil Gathering System. Manifold and Flowline

  • Oil Gathering System
  • Maniflod System
  • Flowline Sizing and Design

Crude Oil and Gas Separation

  • Separator and Principle of Separation
  • Design of Separator
  • Oil Dehydration

Principles of Measurement

  • Introduction to Measurement
  • Crude Oil Measurement
  • Gas Measurement

Well Test

  • Introduction
  • Responsibility for Test
  • Preparation for Test
  • Types of Well Test
  • Equipment and Procedures
  • Accuracy of Fluid Measurement
  • Problem in Testing
  • Type of Test

Gas Handling and Processing Facilities and Maintenance
Introduction to Gas Handling and Facilities

Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservioir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Gas Compression

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition

Gas Processing

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

PESERTA YANG DIREKOMENDASIKAN

Tidak ada persyaratan khusus untuk mengikuti Training Oil and Gas Surface Production Operation Facilities and Maintenance ini, karena pelatihan ini sangat penting diikuti oleh seluruh praktisi di sektor minyak dan gas bumi dikarena akan banyak membahas secara mendetail proses produksi minyak dan gas bumi termasuk didalamnya proses dan maintenance, dimana akan banyak diberikan pengetahuan dan skill dalam melakukan analisa dilapangan sehingga mampu membuat dan merencanakan pengembangan-pengembangan yang mungkin dilakukan dalam rangka meningkatkan kapasitas produksi minyak dan gas. Diantara mereka yang harus hadir dalam pelatihan ini yaitu level operator hingga engineer baik yang baru berkecimpung maupun yang sudah menjadi senior disektor MIGAS

METODE PELAKSANAAN

Dalam Training Oil and Gas Surface Production Operation Facilities and Maintenance ini, menggunakan metode interaktif, yaitu pemahaman dari sisi konsep, contoh aplikasi, berlatih menuangkan konsep, diskusi interaktif dan studi kasus sehingga peserta dapat lebih mudah memahami dan menguasai materi yang diajarkan

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Oil and Gas Surface Production Operation Facilities and Maintenance Year 2024:

  • 29-31 Mei 2024 Bandung
  • 26-28 Juni 2024 Yogyakarta
  • 24-26 Juli 2024 Jakarta
  • 28-30 Agustus 2024 Bali
  • 25-27 September 2024 Bogor
  • 23-25 Oktober 2024 Surabaya
  • 27-29 November 2024 Bandung

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • IDR. 11.000.000,-/participant (Jakarta)
  • IDR. 11.000.000-/participant (Bandung)
  • IDR. 12.000.000,-/participant (Yogyakarta)
  • IDR. 14.000.000,-/participant (Bali)
  • IDR. 14.750.000,-/participant (Lombok)
  • US$ 4780/participant (Malaysia)

Available on request for time, place and facilities call us for more information

 

Training Production Well handling,Separation & Measurement

Petroleum·

OBJECTIVES :

After participate in thid course, the participants will be abble and cappable to :

  • Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology in field application.
  • Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

AUDIENCE:

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Gas Handling Facilities
Introduction to Gas Handling and Facilities

Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservioir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Gas Compression

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition

Gas Processing

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

Oil Handling Facilities
Oil Well Surface Production Equipment and Operation

  • Oil Well Equipment
  • Oil Well Production Operation
  • Well Automatic Safety Device

Oil Gathering System. Manifold and Flowline

  • Oil Gathering System
  • Maniflod System
  • Flowline Sizing and Design

Crude Oil and Gas Separation

  • Separator and Principle of Separation
  • Design of Separator
  • Oil Dehydration

Principles of Measurement

  • Introduction to Measurement
  • Crude Oil Measurement
  • Gas Measurement
  • Well Test
  • Introduction
  • Responsibility for Test
  • Preparation for Test
  • Types of Well Test
  • Equipment and Procedures
  • Accuracy of Fluid Measurement
  • Problem in Testing
  • Type of Test

DURATION

3 Day

FASILITY

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Production Well handling,Separation & Measurement  Tahun 2024:

  • 20-22 Mei 2024 Jakarta
  • 18-20 Juni 2024 Bali
  • 16-18 Juli 2024 Malang
  • 20-22 Agustus 2024 Jakarta
  • 17-19 September 2024 Bandung
  • 15-17 Oktober 2024 Surabaya
  • 19-21 November 2024 Jakarta
  • 17-19 Desember 2024 Yogyakarta

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.000.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 10.500.000,-/peserta (Jakarta)
  • Rp. 10.500.000-/peserta (Bandung)
  • Rp. 11.500.000,-/peserta (Yogyakarta)
  • Rp. 13.000.000,-/peserta (Bali)
  • Rp. 13.750.000,-/peserta (Lombok)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Production Logging and Reservoir Monitoring

Petroleum·

LATAR BELAKANG :

Setelah menyelesaikan training  ini diharapkan peserta dapat :

  • Memahami prinsip dasar dan teknologi mutahir tentang production logging
  • Melakukan diagnosis sifat-sifat sumuran dan reservoir
  • Membuat analisis hasil production logging pada aliran satu dan multi fasa
  • Melakukan perhitungan-perhitungan kuantitratip dari data perolehan dari pelaksanaan production logging

PRE-REQUISITE :

  • Mempunyai pengetahuan dasar geologi hidrokarbon
  • Mempunyai pengetahuan dasar evaluasi formasi dan logging konvensional

AUDIENCE :

Operator/Sr. Operator/Engineer/Non Engineer

MATERI TRAINING  :

Pengertian Tentang Logging Konvensional

  • Penentuan Jenis Batuan dari Data Logging
  • Penentuan Sifat Petrofisik Batuan dari Logging
  • Kuantifikasi Data logging Konvensional : Penentuan Litologi, Porositas, Saturasi Fluida dari Logging Konvensional

Teknik Production Logging

  • Definisi, Sejarah dan Teknologi Kini Tentang Production Logging
  • Diagnosis Sumuran dan Reservoir Oleh Production Logging
  • Production Logging Untuk Pemboran dan Komplesi Sumuran
  • Production Logging Pada Saat Produksi atau Injeksi Sumuran

Aliran Monofasa Dalam Pipa

  • Aliran Laminer dan Turbulen
  • Profil Kecepatan Aliran
  • Aliran Pada Anulus

Temperatur Logging

  • Distribusi Temperatur Dalam Sumuran
  • Interpretasi Log Temperatur
  • Pantauan Perekahan Hidrolik dengan Log Temperatur

Radioactivity-Tracer Logging

  • Tracel Loss Log
  • Velocity-Shot Log
  • Tracer Placement
  • Radioactive-TracerLog Pada Aliran Laminer
  • Two Pulse Tracer Logging

Spinner-Flowmeter Logging

  • Teori Respon Spinner
  • Interpretasi Log Spinner-Flowmeter
  • Pelaksanaan Pengukuran dengan Spinner Flowmeter

Profil Aliran Monofasa

  • Latar Belakang
  • Perbandingan Data Log Temperatur, Radioactive Racer dan Spinner

Aliran Multifasa Dalam Pipa

  • Pengertian Holdup
  • Pola Aliran
  • Kehilangan Tekanan
  • Pengaruh Kemiringan Pipa dan Perforasi

Production Logging pad aliran Multifasa

  • Interpretasi Log
  • Pengukuran Kecepatan Alir
  • Analisis Kuantitatip Log Multipasa
  • Analisis Kualitatip Log Multifasa

Noise Logging

  • Teori Tentang Noise Logging
  •  Baberapa Kegunaan Noise Logging

Cement Quality Logging

  • Cement Bond Log
  •  Attenuation-Ratio Log
  • Ultrasonic –Pulse-Echo Log

Logging Lainnya Setelah Pemasangan Casing

  • Pulse Neutrol Log untuk Menentukan Profil Aliran
  • Radial Diffrential Temperatur Log
  • Evaluasi Gravel Pack
  • Well-Test dengan Production Logging

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft copy dan Hard Copy), Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Production Logging and Reservoir Monitoring 2024:

  • 14-16 Mei 2024 Bogor
  • 11-13 Juni 2024 Yogyakarta
  • 09-11 Juli 2024 Bali
  • 13-15 Agustus 2024 Jakarta
  • 10-12 September 2024 Yogyakarta
  • 08-10 Oktober 2024 Bandung
  • 12-14 November 2024 Bogor
  • 10-12 Desember 2024 Bali

INVESTASI (TIDAK TERMASUK BIAYA AKOMODASI & PENGINAPAN):

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Crude Oil Stabilisation System

Petroleum·

OBJECTIVES :

After participate in this course, the participants will be able and capable to :

  • Understand the basic concept of oil handling processes and facilities, and how to operate this technology in field application.
  • Diagnostic of oil reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil stabilisation and handling processes.

AUDIENCE:

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Oil Stabilisation and Handling Facilities
Oil Well Surface Production Equipment and Operation

  • Oil Well Equipment
  • Oil Well Production Operation
  • Well Automatic Safety Device

Oil Gathering System. Manifold and Flowline

  • Oil Gathering System
  • Manifold System
  • Flow line Sizing and Design

Crude Oil and Gas Separation

  • Separator and Principle of Separation
  • Design of Separator
  • Oil Dehydration

Emulsion Treatment and Dehydration in Crude Oil

  • Introduction
  • Oil Emulsion
  • Energy of Agitation
  • Emulsifying Agents
  • Dehydration/Treating Processes
  • Removal of Free Water
  • Resolution of Emulsified Oil
  • Treating the Emulsion

Principles of Measurement

  • Introduction to Measurement
  • Crude Oil Measurement
  • Gas Measurement

Well Test

  • Introduction
  • Responsibility for Test
  • Preparation for Test
  • Types of Well Test
  • Equipment and Procedures
  • Accuracy of Fluid Measurement
  • Problem in Testing
  • Type of Test

Gas Handling Facilities

Introduction to Gas Handling and Facilities

Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservoir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Crude Oil Stabilisation System tahun 2024:

  • 20-22 Mei 2024 Bandung
  • 04-06 Juni 2024 Malang
  • 02-04 Juli 2024 Surabaya
  • 06-08 Agustus 2024 Yogyakarta
  • 03-05 September 2024 Surabaya
  • 02-04 Oktober 2024 Bogor
  • 05-07 November 2024 Bali
  • 03-05 Desember 2024 Surabaya

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • IDR. 11.000.000,-/participant (Jakarta)
  • IDR. 11.000.000-/participant (Bandung)
  • IDR. 12.000.000,-/participant (Yogyakarta)
  • IDR. 14.000.000,-/participant (Bali)
  • IDR. 14.750.000,-/participant (Lombok)
  • US$ 4780/participant (Malaysia)

Available on request for time, place and facilities call us for more information

Training Oil,Gas and Water Handling Facilities

Petroleum·

OBJECTIVES :

After participate in thid course, the participants will be abble and cappable to :

  • Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology in field application.
  • Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

AUDIENCE:

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE:

Gas Handling Facilities
Introduction to Gas Handling and Facilities

Gas Properties

  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System

Gas Reservioir Performance

  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing

Gas Piping System

  • Basic  Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells

Gas Compression

  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor

Total System Analysis

  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection

Flow Measuring

  • Orifice Metering
  • Metering System Design
  • Other Metering Methods

Gas Condensate Reservoir

  • Well Testing and Sampling
  • Gas Cycling

Field Operation Problems

  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition

Gas Processing

  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

Oil Handling Facilities
Oil Well Surface Production Equipment and Operation

  • Oil Well Equipment
  • Oil Well Production Operation
  • Well Automatic Safety Device

Oil Gathering System. Manifold and Flowline

  • Oil Gathering System
  • Maniflod System
  • Flowline Sizing and Design

Crude Oil and Gas Separation

  • Separator and Principle of Separation
  • Design of Separator
  • Oil Dehydration

Principles of Measurement

  • Introduction to Measurement
  • Crude Oil Measurement
  • Gas Measurement

Well Test

  • Introduction
  • Responsibility for Test
  • Preparation for Test
  • Types of Well Test
  • Equipment and Procedures
  • Accuracy of Fluid Measurement
  • Problem in Testing
  • Type of Test

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Oil,Gas and Water Handling Facilities Year 2024:

  • 14-16 Mei 2024 Bogor
  • 11-13 Juni 2024 Yogyakarta
  • 09-11 Juli 2024 Bali
  • 13-15 Agustus 2024 Jakarta
  • 10-12 September 2024 Yogyakarta
  • 08-10 Oktober 2024 Bandung
  • 12-14 November 2024 Bogor
  • 10-12 Desember 2024 Bali

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Available on request for time, place and facilities call us for more information

Butuh bantuan! Klik disini

Kami siap membantu, silahkan berkomunikasi langsung dengan Tim Kami yang sedang online saat ini. Jika jaringan sedang sibuk, mungkin karena sedang melayani pelanggan lain. Untuk respon cepat silahkan kirim email ke: [email protected] untuk pelayanan via Help Desk

Customer Support

Mei Dwi - Head Office

Online

Customer Support

Umu Hanifatul - Head Office

Online

Customer Support

Eva Arlinda - Head Office

Online

Customer Support

Andini Eryani - Head Office

Online

Mei Dwi - Head OfficeCustomer Support

Hi, Ada yang Bisa saya bantu pak/bu? 00.00

Umu Hanifatul - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Eva Arlinda - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Andini Eryani - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00