Training Principles and Practice of Flow Measurements

OBJECTIVE

Training Principles and Practice of Flow Measurements – This course is intended to give a breadth and depth analysis in oil and gas flow measurement problems which are actually and frequently occurred in the field. In this course the way to diagnose and solve the problem will be shown. Beside that how to detect ant determine micelleneous constituents inoil and gas will be presented too. The participants will be brought to current methods in analyzing oil and gas flow measurement problems that occured in actual fields. Skills in identifying various problems will be build during the course. The modern technique uses a relatively complicated method, but, more accurate and serves much more information needed for oil and gas floe measurement.

After participate in this training, the participants will be able and capable to

  • Understand the basic concept of oil and gas flow measurement , oil and gas handling processes and operation, and how to operate this technology in field application.
  • Analyze the oil and gas flow measurement  under with actual handling system processes using various methods and to plan the better development of oil and gas processing system.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas flow measurement, oil and gas  detection, calculation and operation.

COURSE CONTENS

Introduction to Standard Oil and Gas Measurement Tools.

  • Level
  • Density
  • Temperature

Notion of Static and Dynamic Measurement

  • ASTM Table in Oil Volume Calculation

Land Tank Measurement

  • Calibration Table
  • Oil sampling technique
  • Level, Density and Temperature Measurement.

Land Tank Volume Calculation

  • Liter 150C-Barrel 60oF
  • Oil Stock Calculation
  •  Bill of Loading Calculation
  • After Reciept Calculation
  • Supplay Calculation
  • Working and Discharge Calculation

Oil Losses

  • Kind of losses
  • Cause and sources of losses
  • Losses Calculation
  • Methodology to reduce losses

Flow Measurement and Technology

  • Principle of Oil Flow Measurement
  • Direct Measurement
  • Turbin
  • Elektromagnetic
  • Vortex
  • Ultrasonik
  • Coriolis
  • Thermal Mass
  • Positif Displacement
  • Variabel Area (rotameters)

Indirect Measurement

  • Orifice
  • Flow Nozle
  • Venturi
  • Wedge
  • V-cone
  • Pitot tube / Anubar
  • Target meter

Multiphase Flow Meter

  • MPFM Phylosophy
  • Multiphase Flow
  • MPFM Technology
  • MPFM Design Guidelines

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket, etc, Convenient training facilities in four or five stars hotel.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Principles and practice of Flow Measurements year 2024:

  • 20-22 Mei 2024 Jakarta
  • 18-20 Juni 2024 Bali
  • 16-18 Juli 2024 Malang
  • 20-22 Agustus 2024 Jakarta
  • 17-19 September 2024 Bandung
  • 15-17 Oktober 2024 Surabaya
  • 19-21 November 2024 Jakarta
  • 17-19 Desember 2024 Yogyakarta

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

REFERENSI

  1. Chevron Geothermal Salak
  2. Chevron Geothermal Indonesia, Ltd.
  3. PT. Chevron Pacivic Indonesia
  4. Chevron SMO

TESTIMONIAL

  • “Materi training sangat berguna untuk pekerjaan saya dan pemateri sangat menguasai materi. over all training ini sangat baik dan berkesan” Imam Baihaqi Salam-Chevron Geothermal Indonesia, Ltd.

Principle-BMD

Training Wireline Technology

PENGANTAR

Training Wireline Technology– Technology Wireline sektor perindustrian oil and gas merupakan media instrument yang digunakan untuk mengirimkan atau mengoperasikan special downhole equipment di dalam sumur migas. Dimana ada 2 macam wireline dalam industri migas bisa yaitu: Pertama: Slickline, yaitu wireline yang digunakan terutama untuk mengoperasikan wireline equipment dalam pekerjaan2 workover/well intervention, completion, fishing job, gas lift installation dan sejenisnya dalam sumur migas. Dalam hal ini biasanya wireline equipment tsb berfungsi berdasarkan prinsip mekanis dan dioperasikan dengan manipulasi ‘tarik’ dan ulur’ oleh operator wireline di permukaan. Kedua: Electric wireline disingkat E-Line, yaitu wireline yg digunakan dalam pekerjaan-pekerjaan formation evaluation, logging untuk temperature survey, production survey, kualitas semen di belakang casing, perforasi, memotong tubing atau casing dalam sumur migas. Umumnya e-line berfungsi berdasarkan prinsip elektonik dan komputerisasi, ada pula yang dengan sinyal2 gelombang suara. Sesuai namanya, tentu e-line beroperasi dengan signal signal  listrik oleh operatornya di permukaan. Bagi anda yang ingin mengetahui Technology Wireline lebih dalam sangat direkomendasikan untuk mengikuti Training Wireline Technology dimana akan dibahas secara detail di mulai dari prinsip dasar orientasi teknologi tersebut di plant oil and gas serta membuat estimasi perhitungan dan simulasi dengan akurasi data seactual mungkin dengan kondisi aslinya dilapangan

Training Wireline Technology  bertujuan agar peserta memahami dan mampu:

  • Memahami konsep dasar dari wireline technology
  • Memahami cara untuk mengoperasikan wireline technology
  • Menggunakan instrumentasi wireline technology dalam aplikasi industri oil and gas dan melakukan perawatan untuk menjaga kondisi peralatan agar tetap siap beroperasi.
  • Mampu mendiagnosa minyak dan gas dan performa reservoir dan mekanisme actual dengan wireline technology
  • Mampu menganalisa potensi sumur minyak dengan menggunakan  wireline technology
  • Memahami dasar dan fenomena wireline technology dalam industri oil dan gas, perbaikan operasi, permasalahan produksi dalam industri oil and gas.

PESERTA YANG DIREKOMENDASIKAN

Operator produksi industri oil dan gas, engineer, departemen utilitas, departemen maintenance dan semua pihak yang terlibat dalam pengolahan industri minyak dan gas.

Wireline Survey

  •  Solving Well Mechanical Problems
  •   Supporting Drilling amd Workover Activity
  • Well Data Acquisitions

The Well

  • General Background
  •  Casing Diagram, Well Head, Xmast Tree
  •  Basic Tree types, Sample Completion Schematic
  • Tubing, Tubing Threads

Wireline Surface Equipments

  • General Safety
  • Atuffing Box, Quick Unions, Lubricator
  • BOP, Tree Connection, Weight Indicators

Wireline Units

  •  Spooling Wireline, Wireline Handling
  • Tensile Testing, Torsion Testing, Wire Breaks
  • Braided Line, Wireline Unit
  •  Open Loop Unit, Close Loop Unit

Tool String Components

  •  Rope Sockets, Wireline Knox,
  • Swivel, Stem, Roller Stem
  •  Mechanical Jars, Hydraulic Jars, Petroline Spring Jars
  • Petroline Centraliser, Knuckle joint,  Sucker Rod Threads

Standard Service Tools

  • Gauge Cutter, Blind Box, Imprssion Block
  • Swaging Tool, Wire Scratcher
  • Tubing End Locator
  • SSJ Tools, Pulling Tool  Data, Fishing Neck, GS Tools

Lock Mandrels

  • Lock Mandrels, W Sleep Lock, W running Tool
  • D Collar Lock, D Runing Tools, G Elements
  • Nipple Lock, X/XN Lock, X Running Tools
  • Petroline Uniset Lock Size Reference Chart

Plugs

  • Plug/Equalising Subs
  • D Plug, XX Plug, P/PS Plug, PX Plug
  • Test Tools, Test Tool, Back Pressure Valves
  • Cameron BPV
  • Petroline ABC BPV

Circulating Device

  • XO SSD
  • B Shifting Tool
  • Selective Downshift Tool
  • Separation Tool
  • Side Door Choke

Well Safety System

  • DCSSV
  • DK SCSSV
  • Camco WRDV Safety Valve
  • Troubleshooting Guide
  • SSV, Control Panel

Gas Lift

  • Gas  Lift Principle
  • Side Pocket Mandrel
  • Gas Lift Equipments
  • Kick Over Tool
  • Special Valve Types

BHP Ameradas

  • BHP Survey
  • Amerada Gauges
  • Calibration, Running Procedures
  • Data Recording

Remedial Wireline

  •  A Perforator
  •  F Collar Stop
  •  Sand Bailing
  •  Pump Bailer
  •  Pack Offs

Fishing

  •  Fishing Wire
  •  Wire Finder, Wire Grab
  •  Tubular Jar, Accelerator, Allegator Grab
  • Wire Cutter, Citter Bar, Side Wall Cutter, Go-Devil
  •  Heavy Duty Pulling Tool, Overshot, Center Spears

Calculation-Conversion

  • Basic Formula
  • Rule of Tumbs
  • Force, Hydrostatic Pressure

DURASI

3 Hari

FASILITAS

Normal Class

  • Sertifikat, Modul (Soft dan Hard Copy) Flash disc, Training kit (Ballpoint Tas jinjing), Tas Ransel, Jacket, Lunch, 2x Coffe break, foto bersama dan pelatihan dilaksanakan di Hotel berbintang.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Jadwal Training Wireline Technology 2024:

  • 28-30 Mei 2024 Bali
  • 25-27 Juni 2024 Malang
  • 23-25 Juli 2024 Surabaya
  • 27-29 Agustus 2024 Bali
  • 24-26 September 2024 Bandung
  • 22-24 Oktober 2024 Yogyakarta
  • 26-28 November 2024 Bogor
  • 17-19 Desember 2024 Malang

Biaya registrasi (tidak termasuk biaya akomodasi & penginapan) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • Rp. 11.000.000,-/peserta (Jakarta)
  • Rp. 11.000.000-/peserta (Bandung)
  • Rp. 12.000.000,-/peserta (Yogyakarta)
  • Rp. 14.000.000,-/peserta (Bali)
  • Rp. 14.750.000,-/peserta (Lombok)
  • US$ 4780/peserta (Malaysia)

REFERENSI

  1. Kangean Energy Indonesia Ltd.
  2. Chevron Geothermal Indonesia, Ltd

TESTIMONIAL

  • “Untuk materi yang diberikan oleh Trainer sangat menambah wawasan kami dan memberi gambaran bagaimana wireline technology tersebut” Fakih Setiawan, Operator produksi – Kangean Energy Indonesia Ltd.
  • “Secara keseluruhan untuk training Wireline Technology yang di selenggarakan oleh BMD Street Cosnsulting berjalan dengan sangat baik” Dawud Efendi. Operator produksi – Kangean Energy Indonesia Ltd.

METODE OFFLINE

 

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

 

Training Electric Submersible Pumping

INTRODUCTION TRAINING ELECTRICAL SUBMERSIBLE PUMPING ESP

This course is to summarize the state of the art of Electric Submersible Pump (ESP) technology. It included the example problems to illustrate the use of various theoretical solutions, it also listed an overview of conventional well productivity and Inflow Performance Relationship (IPR) technology and is general introduction to the latest methods of  production optimization using ESP technology.

This course compiled as aid to engineers and production people in the Petroleum Industry who have the responsibility of planning and selecting electrically driven submersible pumping equipment. Included are fundamental principles involving sizing, operation and trouble shooting of submersible pump equipment. Also included are tables, data and general information which it will be value to eve

OUTLINE

Chapter 1 Hydraulic& Electrical Fundamentals

  • Introduction
  • Hydraulic Fundamentals
  • Centrifugal Pump Hydraulics
  • Well Performance
  • Electricity Fundamentals

Chapter 2 Equipment Description

Introduction

Centrifugal Pump

Rotary Gas Separator

Seal Section

Electrical Submersible Motor

Generalized Motor Composite Curves

Motor Controllers

VSC Effects on ESP Components

Chapter 3 Typical ESP Applications

  • Introduction
  • Shrouded Configuration
  • Booster Pump
  • Direct Production-Injection-System
  • Horizontal Injection System
  • Cantle slopeâ Injection System
  • ESP Installation with Deep Set Packer
  • ESP Installation with “Y” Tool
  • Bottom Intake Booster Pump
  • Operation of Submersible Pumps in Harsh Environments
  • High Temperature Wells                            

Chapter 4 Equipment Sizing

  • Introduction
  • Basic Data Required
  • Well Data
  • Sizing Procedure High-Water-Cut

Chapter 5 Installation Maintenance and Trouble shooting

  • Introduction
  • Equipment Transportation
  • Equipment Handling
  • Well Preparation
  • Installation of Down hole Equipment
  • Documentation
  • Motor Controller
  • Testing
  • Data Gathering
  • Re-running Equipment
  • Economic Evaluation
  • Failure Analysis
  • Ammeter Technology
  • Field Checkout
  • ESP Troubleshooting Chart

Chapter 6 Engineering Data

  • Electrical Terms and Definition
  • Useful Formulas
  • Relationships Regarding Flow and Pressure drops in Pipes
  • Temperature Rise in Pumps
  • Measurement for Water Flow
  • Areas of Circles
  • Conversion Factors
  • Temperature Conversion Table
  • Fundamental Unit of Length, Area, Volume and Mass
  • Conversion Factors For Units of Energy
  • Casing and Tubing Sized and Capacities
  • Stretch of  Suspended Casing, Tubing or Drill Pipe
  • Tubing Weight in Fluid
  • Hydrostatic Head
  • Well Temperature versus Current
  • Absolute Viscosity of Gas-Free Crude Oil, Centipoises
  • Absolute Viscosity of Gas-Saturated Crude Oil, Centipoises
  • Pressure Loss Charts
  • Flow Loss due to Friction in API. Pipe (U.S)
  • Inflow Performance relationship Equations

Chapter 7 Installation, Operating And Trouble Shooting The Pump

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

REFERENSI :
  1. SKK Migas
  2. PT Petroturbo Indonesia

Schedule Training Electric Submersible Pumping year 2024:

  • 20-22 Mei 2024 Bandung
  • 04-06 Juni 2024 Malang
  • 02-04 Juli 2024 Surabaya
  • 06-08 Agustus 2024 Yogyakarta
  • 03-05 September 2024 Surabaya
  • 02-04 Oktober 2024 Bogor
  • 05-07 November 2024 Bali
  • 03-05 Desember 2024 Surabaya

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • IDR. 11.000.000,-/participant (Jakarta)
  • IDR. 11.000.000-/participant (Bandung)
  • IDR. 12.000.000,-/participant (Yogyakarta)
  • IDR. 14.000.000,-/participant (Bali)
  • IDR. 14.750.000,-/participant (Lombok)
  • US$ 4780/participant (Malaysia)

Available on request for time, place and facilities call us for more information

 

Butuh bantuan! Klik disini

Kami siap membantu, silahkan berkomunikasi langsung dengan Tim Kami yang sedang online saat ini. Jika jaringan sedang sibuk, mungkin karena sedang melayani pelanggan lain. Untuk respon cepat silahkan kirim email ke: [email protected] untuk pelayanan via Help Desk

Customer Support

Mei Dwi - Head Office

Online

Customer Support

Umu Hanifatul - Head Office

Online

Customer Support

Eva Arlinda - Head Office

Online

Customer Support

Andini Eryani - Head Office

Online

Mei Dwi - Head OfficeCustomer Support

Hi, Ada yang Bisa saya bantu pak/bu? 00.00

Umu Hanifatul - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Eva Arlinda - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Andini Eryani - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00