Training Enhanced Oil Recovery (EOR) Technology To Boost Production

Training Enhanced Oil Recovery (EOR) Technology To Boost Production

INTRODUCTION

Thank you for reading this post, don't forget to subscribe!

Training Enhanced Oil Recovery (EOR)– Oil recovery operations traditionally have been subdivided into three stages: primary, secondary and tertiary. These stages described the production from a reservoir in a chronological sense. Primary production resulted from the displacement energy naturally existing in reservoir. Secondary recovery usually implemented after primary production declined, the term secondary recovery is now almost synonimous with waterflooding. Tertiary recovery was that obtained after waterflooding (or whatever secondary process used) it’s used miscible gases, chemicals and/or thermal energy to displace additional oil. When the waterflooding stage might be reasonably be bypassed the term tertiary recovery fell into disfavor in petroleum engineering term and the designation of enhaced oil recovery (EOR) become accepted to replace the term of secondary and tertiary recovery.

In describing the different EOR processes (Waterflooding, Miscible Displacement, Chemical Flooding: Micellar/Polymer, Surfactant, Alkaline and finally Thermal Recovery Processes, it will be focused on the fundamental concepts of each processes and it will also present methods of predicting oil recovery when the processes are applied to oil reservoir. Many methods are available to calculate displacement performance, ranging from simple models based on volumetric sweep to sophisticated method. Thus, with the proper understanding of all enhanced oil recovery processes will reduce the entire cost of the plant and production operation of EOR system.

This five-day training will provide a comprehensive knowledge and understanding of different EOR processes (Waterflooding, Miscible Displacement, Chemical Flooding: Micellar/Polymer, Surfactant, Alkaline) and Thermal Recovery Processes with various fields example.

OBJECTIVES

  • Refresh the knowledge of the participants on reservoir engineering and enhanced oil recovery (EOR) processes.
  • Understand the fundamental concepts of each EOR process and ability to calculate and to predict the EOR performance.
  • Learn the simple EOR models based on volumetric sweep model to sophisticated method of calculation.
  • Enhance the knowledge on EOR processes (Waterflooding, Miscible Displacement, Chemical Flooding: Micellar/Polymer, Surfactant, Alkaline) and Thermal Recovery Processes with various fields example.
  • Gain additional knowledge on EOR processes (Waterflooding, Miscible Displacement, Chemical Flooding: Micellar/Polymer, Surfactant, Alkaline) and Thermal Recovery Processes. Knowledge sharing among the participants and instructors

FEATURING THE FOLLOWING SUBEJCTS

Introduction to EOR Processes

  • Definition of EOR
  • Target Oil Resources for EOR Processes
  • Idealized Characteristics of an EOR Processes
  • Potential of Different Processes
  • Screening Criteria for Process Applicability

Microscopic Displacement of Fluids in a Reservoir

  • Capillary Forces
  • Viscous Forces
  • Phase Trapping
  • Mobilization of Trapped Phases-Alteration of Viscous/Capillary Force Ratio

Displacement in Linear System

  • Waterflood Performance-Frontal Advanced Equation
  • Viscous Waterflood in a Linear System
  • Chemical Flooding in Linear System
  • Application of Chemical Flooding Model
  • Displacement of  Slugs
  • Dispertion During Niscible Displacement
  • Viscous Fingering-Instability in Displacement Fronts

Macroscopic Displacement of Fluids in a Reservoir

  • Volumetric Displacement Efficiency and Material Ballance
  • Definition and Discussion of Mobility Ratio
  • Areal Displacement Efficiency
  • Vertical Displacement Efficiency
  • Volumetric Displacement Efficiency

Mobility-Control Processes

  • Process Description
  • Physical and Chemical Characteristics of Polymer
  • Flow Polymer Through Porous Media
  • In-Situ Permeability Modification
  • Mobility Control to maintain Chemical Slug Integrity
  • Foam as EOR Agent
  • WAG Process

Miscible Displacement Processes

  • General Description of Miscible Displecement
  • Principles of Phase Behavior in Miscible Displacement
  • FCM anc MCM Processes
  • Measurement and Prediction of MMP or MME in Multiple Contact Prosess
  • Fluid Properties in Miscible Displacement
  • Miscible Displacement Modeling

Chemical Flooding

  • Description of Micellar/Polymer Process
  • Surfactants
  • Phase Behavior of Microemultion and IFT
  • Variables Affecting Phase Behavior and IFT
  • Viscosity and Density of Microemultion
  • Displacement Mechanism
  • Modeling, design Procedure and Criteria of Chemical Flood Displacement
  • Alkaline Flooding

Thermal Recovery Processes

  • Heat Losses During Steam Injection
  • Cyclic Steam Stimulation
  • Reservoir Heating by Steam Injection
  • Estimating of Oil Recovery From Steam Drive
  • In-Situ Combustion
  • Comparison of Steam and In-Situ Combustion

DURATION

3 Day

FASILITY

Normal Class

  • Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

Online Class

  • Softcopy Modul dan Sertifikat

INFORMATION & PROMO

Call : 021 756 3091

Fax : 021 756 3291

CONTACT PERSON

0813 8280 7230, 0812 8931 1641

Email: [email protected]

Website: https://bmdstreet.co.id

Schedule Training Enhanced Oil Recovery Technology To Boost Production year 2024 :

  • 16-18 Januari 2024 Bali
  • 20-22 Februari 2024 Bogor
  • 19-21 Maret 2024 Surabaya
  • 16-18 April 2024 Yogyakarta
  • 20-22 Mei 2024 Jakarta
  • 18-20 Juni 2024 Bali
  • 16-18 Juli 2024 Malang
  • 20-22 Agustus 2024 Jakarta
  • 17-19 September 2024 Bandung
  • 15-17 Oktober 2024 Surabaya
  • 19-21 November 2024 Jakarta
  • 17-19 Desember 2024 Yogyakarta

Investation (Not Include Hotel Acomodation) :

Online Class

  • Rp 5.500.000/peserta (Online Zoom Meeting)

Normal Class

  • IDR. 11.000.000,-/participant (Jakarta)
  • IDR. 11.000.000-/participant (Bandung)
  • IDR. 12.000.000,-/participant (Yogyakarta)
  • IDR. 14.000.000,-/participant (Bali)
  • IDR. 14.750.000,-/participant (Lombok)
  • US$ 4780/participant (Malaysia)

Available on request for time, place and facilities call us for more information

Training EOR 28-30 oktober 2013 Bandung

Butuh bantuan! Klik disini

Kami siap membantu, silahkan berkomunikasi langsung dengan Tim Kami yang sedang online saat ini. Jika jaringan sedang sibuk, mungkin karena sedang melayani pelanggan lain. Untuk respon cepat silahkan kirim email ke: [email protected] untuk pelayanan via Help Desk

Customer Support

Mei Dwi - Head Office

Online

Customer Support

Umu Hanifatul - Head Office

Online

Customer Support

Eva Arlinda - Head Office

Online

Customer Support

Andini Eryani - Head Office

Online

Mei Dwi - Head OfficeCustomer Support

Hi, Ada yang Bisa saya bantu pak/bu? 00.00

Umu Hanifatul - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Eva Arlinda - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00

Andini Eryani - Head OfficeCustomer Support

Yth. Bapak/ibu ada yang bisa saya bantu..? 00.00